• 제목/요약/키워드: Electrospun filter

검색결과 11건 처리시간 0.021초

전기방사를 통한 정전필터제조 및 특성분석 (Characteristic Analysis of Electret Filters made by Electrospinning)

  • 안영철;김길태;김승곤;이재근;김종원
    • 대한설비공학회:학술대회논문집
    • /
    • 대한설비공학회 2008년도 하계학술발표대회 논문집
    • /
    • pp.1134-1138
    • /
    • 2008
  • Electret filter media are used in general ventilation filters, disposable respirators, vehicle cabin filters, vacuum cleaners and room air cleaners. There are basic mechanisms of interception, inertial impaction, diffusion, gravitational settling, electrostatic attraction by which an aerosol particle can be deposited onto a fiber in a filter. The ability of fine particle removal strongly depends on the electrostatic forces between particles and polarized fibers. Thus, the stability of the fiber polarization is a major factor in the reliability of electret filters. In this study, electrical properties and filtration performance of electrospun filter media are quantitatively investigated. Electrical properties of electrospun filters have been studied on surface charge potential and surface charge density. Also the filtration performance of the electret filters are evaluated on collection efficiency. Electrospun filters show same collection efficiency with low pressure drop compare to commercialized HEPA filters. Surface charge potential and surface charge density of electrospun filters are increased with increasing applied voltage. Also collection efficiency of electrospun filters is increased with increasing surface charge potential and surface charge density.

  • PDF

전기방사 나노섬유 에어필터의 정전기적 특성 및 에어로졸 여과특성 (Aerosol filtration and electrostatic properties of electrospun nanofiber air filters)

  • 박현설;임경수
    • 한국입자에어로졸학회지
    • /
    • 제5권2호
    • /
    • pp.71-81
    • /
    • 2009
  • In this study, Nylon 6,6 electrospun (ES) nanofiber filter media were prepared at various spinning conditions. The ES filters tested had no intrinsic electrical charges. The ES filters were triboelectrically charged in the course of filter sample handling, and the charge was drastically decayed in a few hours. On the other hand, the corona charged melt blown filter media showed a permanent electrical charge. The electrical charge state of the ES filters was also examined by comparing collection efficiencies of ES filters for uncharged and charged aerosol particles.

  • PDF

전기방사를 통해 제조된 정전기 보유 필터의 표면전위 및 대전량에 따른 성능특성 분석 (Characteristic Analysis of Electret Filters made by Electrospinning)

  • 김길태;안영철;이재근
    • 설비공학논문집
    • /
    • 제20권12호
    • /
    • pp.820-824
    • /
    • 2008
  • Electret filter media are used in general ventilation filters, disposable respirators, vehicle cabin filters, vacuum cleaners and room air cleaners. There are basic mechanisms of interception, inertial impaction, diffusion, gravitational settling, electrostatic attraction by which an aerosol particle can be deposited onto a fiber in a filter. The ability of fine particle removal strongly depends on the electrostatic forces between particles and polarized fibers. Thus, the stability of the fiber polarization is a major factor in the reliability of electret filters. In this study, the electret filter is made by electrospinning process using Polystyrene which is dissolved by 5 : 5 of Tetrahydrofuran (THF) and Dimethylformamide (DMF). Also the electrical properties and the filtration performances of electrospun filter media are Quantitatively investigated. Electrical properties of electrospun filters have been studied on surface charge potential and surface charge density. Also the filtration performance of the electret filters are evaluated on collection efficiency. The surface charge potential and the surface charge density of electrospun PS filters are increased with increasing applied voltage and saturated at 30 kV of applied voltage. Also collection efficiency of electro spun filters is increased with increasing surface charge potential and surface charge density. But the surface charge potential is decreased by natural decay and it causes deterioration of particle collection efficiency.

공기 중 미세먼지와 휘발성유기화합물 제거를 위한 활성탄 전기방사 필터 연구 (Study on Electrospun Activated Carbon Mats for the Filtration of Particulate Matter and Volatile Organic Compound in the Air)

  • 한상일
    • Korean Chemical Engineering Research
    • /
    • 제56권3호
    • /
    • pp.356-360
    • /
    • 2018
  • 인구증가와 개발 도상 국가의 산업 활동 증가로 인해 대기 중 미세먼지농도가 상승함에 따라 생태계에 미치는 영향이 심각해지고 있다. 그로인해 미세먼지발생을 줄이기 위한 정책을 수립하여 시행하거나 미세먼지를 여과해주는 공기청정기나 마스크의 연구가 활발히 이루어지고 있다. 본 연구에서는 전기방사실험을 통해 셀룰로스 아세테이트 파이버 필터를 제조하고 고분자용액에 활성탄을 첨가하여 미세입자 제거에 미치는 활성탄의 영향을 평가하였다. 미세입자 생성을 위해 염화나트륨 수용액을 사용하였으며, 공기 중 수분의 영향을 배제하기 위해 건조기를 설치하여 수분을 제거한 후 필터 성능을 분석하였다. 활성탄이 첨가될수록 미세입자 제거 효율은 증가하였으며, 아세톤 흡착량 또한 증가하였다.

나노섬유 필터의 개발 동향 (Development Trend of Nanofiber Filter)

  • 강인규;김영진;변홍식
    • 멤브레인
    • /
    • 제16권1호
    • /
    • pp.1-8
    • /
    • 2006
  • 나노섬유란 $1{\mu}m$ 이하의 섬유를 의미하며 멜트블로운(Melt blown), 복합방사, 분할방사, 전기방사 등의 방법으로 제조된다. 나노섬유는 초극세 섬유로서 섬유의 생성과 동시에 3차원의 네트워크로 융착되어 적층된 형태의 다공성 웹은 초박막, 초경량이며 기존 섬유에 비해 부피 대비 표면적비가 지극히 높고, 높은 기공도를 지니고 있다. 이러한 특성으로 인해 가스나 액체로부터 미세입자를 분리하는 고효율 초기능성 필터 소재로 활용될 수 있으며, 나노섬유로 구성된 필터는 여과 효율이 높고 공극율이 매우 높아 필터에서 발생하는 압력강하가 적다. 또한 공정의 적용이 용이하여 기존의 부직포 등의 소재에 코팅이 가능하므로, 나노섬유 필터는 기존 부직포 필터 시장의 대부분을 대체할 것으로 기대되어 진다. 본 총설에서는 나노섬유 필터의 연구개발 동향과 공업적 제조기술의 문제점 및 향후 시장성에 대해서 고찰하였다.

전기방사를 이용한 탄소나노튜브 폴리머 공기정화 멤브레인 개발 (Development of Electrospun Cellulose Acetate Membranes using Carbon Nanotubes for Filtration of Particulate Matter in the Air)

  • 박소연;김재혁;한상일
    • Korean Chemical Engineering Research
    • /
    • 제55권1호
    • /
    • pp.68-73
    • /
    • 2017
  • 공기 중 분포하는 직경 $0.01{\mu}m{\sim}10{\mu}m$ 이하의 공기 중 미세입자는 섬유 층으로 구성된 멤브레인을 이용하여 제거될 수 있다. 전기 방사 기술, 용융방사, 용액방사, 겔 상태방사와 같은 필터 섬유 제조 기술 중 전기 방사 기술이 최근 가장 주목 받고 있으며, 다른 기술들에 비하여 수백 나노~수십 마이크로미터 정도의 균일한 직경의 섬유를 제조할 수 있다. 전기 방사 기술로 개방된 내부 구조, 넓은 다공성, 내부 표면적을 가지는 멤브레인을 제조할 수 있으므로, 전기 방사 멤브레인의 여과 성능이 눈에 띄는 향상을 보일 것으로 예상된다. 본 연구에서는 멤브레인 필터 섬유 두께, 밀도, 탄소나노튜브 첨가 등에 따른 분리 효율을 비교하였다. 분리 효율은 기공 크기가 작을수록, 섬유가 촘촘히 배열될수록 증가하였다.

탄소나노튜브가 첨가된 전기방사 멤브레인의 미세입자 제거 성능 비교에 관한 연구 (Study on Performance Comparison in Carbon Nanotube Embedded Electrospun Membranes for Particulate Matter Removal)

  • 구민경;김동완;한상일
    • Korean Chemical Engineering Research
    • /
    • 제56권1호
    • /
    • pp.56-60
    • /
    • 2018
  • 미세입자가 미치는 부정적인 영향으로 인해 관심이 증가하여 공기 중 미세입자를 제거할 수 있는 멤브레인 필터의 성능향상을 위해 다양한 방법을 도입하여 왔다. 필터 섬유 제조 기술 중 전기 방사 기술이 최근에 가장 주목을 받고 있으며, 수 백 nm에서 수 십 ${\mu}m$ 까지의 균일한 직경의 섬유를 제조 할 수 있는 장점을 가진다. 전기 방사 기술로 생성한 섬유는 초극세 섬유로서 섬유의 생성과 동시에 3차원의 네트워크로 적층된 형태의 다공성 웹은 초박막, 초경량이며 기존 섬유에 비해 부피 대비 표면적비가 높고, 높은 기공도를 가지는 멤브레인을 제조 할 수 있으므로, 전기 방사 멤브레인의 여과 필터 성능이 크게 향상 될 것으로 예상이 된다. 본 연구에서는 polystyrene, cellulose acetate 멤브레인 필터를 이용하여 섬유 두께, 탄소나노튜브의 조성비에 따른 필터로서의 여과성능을 살펴보았으며, 필터소재의 성능 비교실험 결과 적정량의 CNT 소재의 첨가로 인해 필터의 여과 성능이 향상되는 것을 알 수 있다.

미세입자, 휘발성유기화합물 차단을 위한 전기방사 창문 필터 (Development of Window Filters Using an Electrospinning Technique to Block Particulate Matter and Volatile Organic Compound)

  • 김순호;한상일
    • Korean Chemical Engineering Research
    • /
    • 제61권3호
    • /
    • pp.401-406
    • /
    • 2023
  • 산업이 발달함에 따라 미세먼지는 환경, 건강, 생활 등 다양한 분야에서 문제를 일으키고 있으며, 특히 대기오염에 의해 발생되는 미세먼지는 심각한 환경문제로 대두되고 있다. 따라서 본 연구에서는 전기방사 기술을 적용하여 실리콘 지지체에 셀룰로스아세테이트 고분자 섬유를 방사하여 미세입자를 차단하고, 활성탄 입자를 첨가하여 휘발성유기 화합물을 제거하고자 하였다. 활성탄 비율과 전기방사 시간을 달리하여 활성탄 비율, 필터 두께에 따른 미세먼지 차단효과, 톨루엔 흡착 성능을 분석하였다. 그 결과 전기방사시간이 증가함에 따라 1~3 ㎛ 크기의 입자가 효과적으로 차단되었으며, 활성탄의 양이 0%에서 5%로 증가함에 따라 톨루엔 흡착량이 증가하는 것으로 나타났다. 전기방사 시간이 길어질 경우 필터 두께 증가로 인해 빛 투과가 현저히 떨어졌으며, 20~30분 전기방사한 필터의 경우 빛이 투과하여 창문 필터 적용 가능성을 보여주었다.