• 한국가축번식학회지
• /
• 제3권1호
• /
• pp.56-60
• /
• 1979

This study was carried out to find the difference between the naturaly born sex rtio among 1,242 head of pigs(120 litters) at Swine Farm, Cheil Sugar Co. and B-body a, pp.arance from their semen, and to find the conception rates which were inseminated to 40 sows with sperm from the anode and cathode after electrophoresis of boar semen. In order to the electrophoretic separation, the semen was placed into the platimum loop electrodes(105 cc) at room temperature for 30 minutes with D.C. 3V. and 350${\mu}$A. constant. The sperm fluorescent staining method was performed in accordance with Bhattacharya's(1970) method. The spermatozoa were observed through a Olympus Vanox microscope(made in Japan) using exciter filter with I heat barrier HPO 120. The results obtained were summarized as follows: 1. The natural sex ratio of 1,242 piglets(120 litters) which were born at Swine Farm, Cheil Sugar Co. was 50%, and B-body a, pp.arance of its boar semen were 49.24%. 2. With electrophoretic separation, the anode and cathode attracted 65.5${\pm}$5.03% and 29.89${\pm}$4.29% of B-body bearing sperm, respectively. 3. After electrophoresis of boar sperm, they were inseminated to 40 sows with sperm from anode and cathode. The conception rate was 92.5%.

• 센서학회지
• /
• 제27권1호
• /
• pp.1-5
• /
• 2018

Two-dimensional (2D) niobate-based nanosheets have attracted attention as high-k dielectric materials. We synthesized strontiumsubstituted calcium niobate ($Ca_{0.8}Sr_{1.2}Nb_3O_{10}$) nanosheets by a two-step cation exchange process from $KCa_{0.8}Sr_{1.2}Nb_3O_{10}$ ceramic. The $K^+$ ions were exchanged with $H^+$ ions, and then H+ ions were exchanged with tetrabutylammonium ($TBA^+$) cations. The $Ca_{0.8}Sr_{1.2}Nb_3O_{10}$ nanosheets were then exfoliated, decreasing the electrostatic interaction between each niobate layer. Furthermore, $Ca_2Nb_3O_{10}$ nanosheets were synthesized in same process for comparison. Each exfoliated nanosheet shows a single-crystal phase and has a lateral size of over 100 nm. The nanosheets were deposited on a $Pt/Ti/SiO_2/Si$ substrate by the electrophoretic deposition (EPD) method at 40 V, followed by ultraviolet irradiation of the films in order to remove the remaining $TBA^+$ ions. The $Ca_{0.8}Sr_{1.2}Nb_3O_{10}$ thin film exhibited twice the dielectric permittivity (~60) and lower dielectric loss than $Ca_2Nb_3O_{10}$ thin films.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 기술교육전문연구회
• /
• pp.82-85
• /
• 2003

This dissertation describes an optimization method for fabricating thick films with superconducting YBCO powders by electrophoresis technique. The lateral alternating applied voltage caused to shake the superconducting powder vertically to the deposition field during the process of the oriented deposition so that it was deposited along the c-axis on the silver tape with shaky-aligned EPD. As the result, the optimized thin film fabrication method was obtained to get more dense and uniform surface morphology as well as the improved critical current density. For commercial utilization and efficiency, in this dissertation, alternating voltage of 25-120 V/cm in frequency of 60Hz was proposed to apply it as a subsidiary source for shaky-flow deposition so that the fabricated thin film showed uniform surface morphology with less voids and cracks and $T_{c.zero}$ of 90 K and the critical current density of $3419A/cm^2$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.231-234
• /
• 1998

In this experiment, A1$_2$O$_3$thick films were prepared by electrophoretic method using A1$_2$O$_3$ fine powder of which compositions were FA-5-500 and FA-5-900. As a result of measurement for A1$_2$O$_3$ thick film characteristics due to applied voltage, deposition time and additives condition, the result of deposited films exhibited superior than others when the applied voltage and deposition time were 65 volts and 2 seconds in case of using modified suspension medium added additives. When taken a heat treatment and sintered A1$_2$O$_3$ deposition film made by electrophoresis with A1$_2$O$_3$ suspension medium at 1$700^{\circ}C$ for 5 minutes in hydrogen environment, it could be fabricated in good uniformity and electric characteristics as the A1$_2$O$_3$ insulating thick films.

• 한국동물학회지
• /
• 제15권3호
• /
• pp.101-104
• /
• 1972

간편하고 경제적이며 재현성도 우수한 cellulose acetate 전기영동장치를 제작하였다. 본 장치를 사용하여 몇가지 동물 조직의 lactate 및 malate dehydrogenase isozyme 을 분리 검출하여 본 결과, 기존 제품으로 실험한 결과와 별로 차이가 없음을 알았다. 흔히 cellulose acetate 전기영동은 일정한 정전류에서 실시하는데, 본 장치에서는 약간의 전류변동이 있는 것이 사실이나 실험결과는 충분히 실용적인 것이었다.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2002년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.2
• /
• pp.399.2-399.2
• /
• 2002

Capillary electrophoretic direct chiral separation method is described for the determination of the absolute configuration of chiral aromatic acids, The enantiomeric separation was achieved by capillary electrophoresis using HP $\beta$-cyclodextrin (CD) as the chiral selector. The effect of CD concentration was investigated to optimize the chiral separation and resolution. When applied to microbial culture fluid. the present method allowed positive identification of chiral aromatic acids and their chirality as well.

• 마이크로전자및패키징학회지
• /
• 제30권1호
• /
• pp.90-94
• /
• 2023

금속 발열체는 높은 열손실과 화재 위험성 등의 문제점이 있어 우수한 열전도도와 전기전도도 특성을 갖는 탄소섬유가 대체소재로 각광받고 있다. 그러나 탄소섬유는 약 200℃ 이상에서 산화하여 단선되기 때문에 발열체 적용이 제한적이며, 현재 진공관 형태로 탄소섬유 발열체가 일부 사용되고 있다. 본 연구에서는 진공관을 사용하지 않고 대기 중탄소섬유 산화방지를 위해 전기영동증착법으로 탄소섬유 표면에 내열성이 높은 폴리이미드를 코팅하였으며 인가전압에 따른 코팅 두께와 내열성을 확인하였다. 폴리이미드를 코팅한 탄소섬유 발열체를 직렬 연결하여 만든 히터는 최대 292℃ 까지 안정적인 발열 특성을 보였으며 이는 열전달 시뮬레이션의 발열온도 결과와 유사하였다. 전기영동증착방법으로 코팅한 폴리이미드 층은 200℃ 이상에서 탄소섬유의 산화방지에 효과적이며 발열 안정성을 요구하는 2차전지, 우주항공, 전기자동차 등 다양한 발열 부품에 적용 가능할 것으로 기대된다.

• 반도체디스플레이기술학회지
• /
• 제14권1호
• /
• pp.55-59
• /
• 2015

This study demonstrates hybrid-type transparent electrodes for touch screen panels. The hybrid-type electrodes were fabricated by coating carbon nanotubes (CNTs) on metal meshes. To form the metal-meshes, thin films of silver (Ag) were deposited on glass substrates using the sputtering method and then patterned via photolithography to obtain mesh structures whose line width was $10{\mu}m$ and line-to-line spacing was $300{\mu}m$. CNTs were coated on Ag-meshes by using two different methods, such as spray coating and electrophoretic deposition (EPD). For the samples of a Ag-meshes and CNTs-coated Ag-meshes, their surface morphologies, electrical sheet resistances, and visible-range transmittances and reflectances were characterized and compared. The experimental results indicated that the reflectance of Ag-mesh electrodes was substantially reduced by coating of CNTs. Especially, the hybrid electrodes of Ag-meshes with EPD-coated CNTs showed excellent properties such as sheet resistance lower than $20{\Omega}/{\Box}$, transmittance higher than 90 %, and reflectance lower than 8%.

• 한국세라믹학회지
• /
• 제47권6호
• /
• pp.485-490
• /
• 2010

In our previous studies, continuous SiC fiber-reinforced SiC-matrix composites ($SiC_f$/SiC) had been fabricated by two different slurry infiltration methods: vacuum infiltration and electrophoretic deposition (EPD). 12 wt% of $Al_2O_3-Y_2O_3$-MgO with respect to SiC powder was used as additives for liquid-phase assisted sintering. After hot pressing at $1750^{\circ}C$ under 20 MPa for 2 h in Ar atmosphere, a high composite density could be achieved for both cases, whereas the problems such as large grain size and non-uniform distribution of liquid phase were observed, which was resulted in the relatively poor mechanical properties of composites. Therefore, efforts have been made to reduce the grain growth during the sintering, including the optimization for hot pressing condition and utilization of spark plasma sintering using a SiC monolith. Based on the results, spark plasma sintering was found to be effective method in decreasing the amount of sintering additive, time and grain growth, which will be explained in comparison to the results of hot pressing in this paper.

• Bulletin of the Korean Chemical Society
• /
• 제25권3호
• /
• pp.377-381
• /
• 2004

Chiral separation of aryalcohols such as 1-phenyl-propanol, 1-phenyl-2-proanol, and 2-phenyl-1-propanol by capillary electrophoresis has been optimized using the overlapping resolution mapping (ORM) scheme. Three critical parameters of the electrophoretic media, i.e. phosphate concentration, sulfated ${\beta}$-cyclodextrin (CD) concentration and pH, were chosen for optimization. The working ranges were initially presumed by 7 preexperiments. Further optimization was carried out by another seven experiments within the narrow working ranges. From the final overlapping resolution mapping all peak pairs, the area of maximum separations were located. Using the conditions of a point in this area, we found that the target compounds were a baseline separated within 30 min. The maximum separation conditions of arylalcohols were a chiral selector concentration of 5.4%, a phosphate concentration of 28 mM, and a pH of 5.0.