• Korean Journal of Construction Engineering and Management
• /
• v.24 no.3
• /
• pp.3-11
• /
• 2023

This research examines the need for a quantitative and objective method of calculating baseline productivity in the construction industry, which is known for its high volatility in performance and productivity. The existing literature's baseline productivity calculation methods rely heavily on subjective criteria, limiting their effectiveness. Additionally, data collection methods such as the "Five-minute Rating" are costly and time-consuming, making it challenging to collect detailed data at construction sites. To address these issues, this study proposes an objective baseline calculation method using unimpacted productivity BP, a work check sheet to systematically record detailed data, and a data collection and utilization process that minimizes cost and time requirements. This paper also suggests using unimpacted productivity BP and comparative analysis to address the objectivity and reliability issues of existing baseline productivity calculation methods.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.16 no.2
• /
• pp.109-115
• /
• 2023

In this paper, we demonstrated the orientation characteristics of liquid crystals using UV-treated FSAM as alignment layer. Moreover we confirmed the FSAM properties before and after UV treatment on indium tin oxide (ITO) glass substrates using physicochemical analysis. The hydrophobic property of the FSAM surface is change to hydrophilic through UV treatment. After UV treatment the LC molecules also were uniformly and horizontally aligned on the FSAM surfaces and the pretilt angle was obviously changed 90° degrees to 0° degrees. EO characteristic of TN cell which was fabricated with UV-treated FSAM was faster response time compare to conventional PI layer. The FSAM before and after UV treatment has a superior application potential as the LC alignment layer for LCD, potentially replacing the conventional polyimide layer.

• International journal of advanced smart convergence
• /
• v.12 no.2
• /
• pp.76-83
• /
• 2023

Squatting of agricultural work can cause musculoskeletal disorders due to excessive pressure and rotational force on the knee joint In order to improve the assistive chair used in squatting agricultural work so that it can be used in a narrow groove, it is intended to improve the musculoskeletal harm of squatting work by attaching a spring on the assistive chair. Therefore, in the presenty study, 3D drawing was done using ProEngineer (3D), and a mock-up was produced and tested. Using pro-Engineer, it was judged that it was rare for plastic to be broken by a spring, so the analysis was conducted with a focus on springs. It was found that the structure that can absorb the shock according to the rigidity of the tape spring and balance the body is that the power to withstand the load of the weight is distributed as a whole when five springs are used. Electromyography was measured using ME600 (Mega Electronics, Finland) Measuring equipment attached to the waist, thighs, calves, and shins. EMG values were measured and compared with the prototype in two ways, when the worker did not wear the product and when he wore an existing product on the market. As a result of the experiment when using the prototype, the maximum EMG value for each part is considered to be helpful in preventing musculoskeletal diseases as the amount of muscle used is reduced in the waist, thighs, calves, and shins.

• Asia Marketing Journal
• /
• v.14 no.3
• /
• pp.137-151
• /
• 2012

Established in May 2005, INNOCEAN Worldwide started as an affiliate marketing and communications company of the Hyundai Motor Group and grew into a top agency ranked no. 2 in the South Korean market within seven years. Currently, INNOCEAN Worldwide has become a global company, operating in sixteen countries through four regional headquarters, fifteen overseas subsidiaries, and seven branch offices with more than 1,100 employees. The company holds top clients from finance, electronics, telecommunications, food, retail, education and other various industries. The accomplishment of INNOCEAN Worldwide can be summarized by the following five key factors. The first factor is INNOCEAN Worldwide's strong and enduring passion and commitment to enter the global market and to build and strengthen its global network. The second factor is achieving successful localization through recruiting talented employees for its overseas branches directly from the local workforce, which enables the company to overcome language barriers, cultural differences, and creative gaps among different regional markets. Third is the company's effective implementation of the 'Global Resource Remix' strategy, which incorporates the distinctive competencies of each overseas operation as a global company standard. Fourth is the creation of the 'Discover System,' a global knowledge management system enabling overseas offices worldwide to share each other's accumulated knowledge and experiences. The fifth factor is the successful establishment of INNOCEAN Worldwide's unique Total Marketing Solution Service. Through this service, the company has offered integrated consulting services for strategic brand management to solve various marketing problems. In summary, the passion and commitment of INNOCEAN Worldwide's top management for the company's globalization and the supporting system that enables such commitment have made it possible for the company to take a global leap and become not merely a company with global operations but a truly global company.

• Journal of IKEEE
• /
• v.27 no.4
• /
• pp.650-656
• /
• 2023

This paper implements a channel model for mmWave bands using an NS-3-based 5G system-level simulator and analyzes the reliability and validity of the implemented model through RF performance verification. The channel model for RF performance verification in the mmWave bands consider parameters such as characteristics defined in 3GPP TR 38.901, beam-forming, antenna configuration, scenarios, among others. Furthermore, the simulation results verify compliance within the ranges permitted by the 3GPP standards and verify reliability in indoor environmental scenarios by exploiting the Radio Environment Map (REM). Therefore, the channel model implemented in this study is applicable to the actual design and establishment of 5G networks, presenting a method to evaluate and validate RF performance by adjusting various parameters.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.16 no.5
• /
• pp.256-264
• /
• 2023

Smart farm technology using IoT is one of the technologies that can increase productivity and improve the quality of agricultural products in agriculture, which is facing difficulties due to the decline in rural population, lack of rural manpower due to aging, and increase in diseases and pests due to climate change. . Smart farms using existing IoT simply monitor farms, implement smart plant growers, and have automatic greenhouse opening and closing systems. This paper implements a smart farm system based on MQTT, an industry standard protocol for the Internet of Things, and Node-RED, a representative development middleware for the Internet of Things. First, data is extracted from Arduino sensors, and data is collected and transmitted from IoT devices using the MQTT protocol. Then, Node-RED is used to process MQTT messages and store the sensing data in real time in MongoDB, a representative NoSQL, to store the data. Through this smart farm system, farm managers can use a computer or mobile phone to check sensing information on the smart farm in real time, anytime, anywhere, without restrictions on time and space.

• Korea Trade Review
• /
• v.45 no.2
• /
• pp.51-65
• /
• 2020

According to an analysis of 560 foreign-invested companies investing in South Korea's manufacturing industry, the following three facts were found. First, the proportion of sales by manufacturing foreign-invested companies is divided into 68.5 percent of domestic sales and 31.5 percent of exports. From 68.5 percent of domestic sales, sales to Korean companies are 60.5 percent, including 37.1 percent for large companies and 23.4 percent for small and medium-sized companies, while only 8.0 percent for domestic consumers. Second, the investment sectors of manufacturing foreign-invested enterprises are 'machine and equipment manufacturing', 'chemical and chemical-chemical material manufacturing-excluding pharmaceuticals', 'electronic components, computers, video, sound and communication equipment manufacturing' and 'vehicle and trailer manufacturing'. It overlaps with electric·electronics, petro-chemicals and automobiles, which are Korea's main industries and areas of Korean global companies. Third, 31.5 percent of the sales of foreign-invested companies in the manufacturing sector are exported. Foreign-invested companies export their products to use them for their parents or affiliates or to the third countries. The analysis shows that foreign-invested companies invested in Korea for B2B transactions with Korean companies. The implications are that Korea can attract foreign investments by utilizing Korean companies' demand for intermediate goods. Foreign-invested companies can invest in Korea in order to use Korea, which has signed free trade agreements with the US, the EU and ASEAN, as an export platform.

• Journal of the Korean institute of surface engineering
• /
• v.57 no.3
• /
• pp.165-178
• /
• 2024

In semiconductor memory device manufacturing, the capability for high aspect ratio contact (HARC) etching determines the density of memory device. Given that there is no standardized definition of "high" in high aspect ratio, it is crucial to continuously monitor recent technology trends to address technological gaps. Not only semiconductor memory manufacturing companies such as Samsung Electronics, SK Hynix, and Micron but also semiconductor manufacturing equipment companies such as Lam Research, Applied Materials, Tokyo Electron, and SEMES release annual reports on HARC etching technology. Although there is a gap in technological focus between semiconductor mass production environments and various research institutes, the results from these institutes significantly contribute by demonstrating fundamental mechanisms with empirical evidence, often in collaboration with industry researchers. This paper reviews recent studies on HARC etching and the study of dielectric etching in various technologies.

• Applied Chemistry for Engineering
• /
• v.35 no.1
• /
• pp.61-65
• /
• 2024

The effectiveness of CuSCN as a hole injection layer in large-area organic light-emitting diodes, organic solar cells, and thin-film transistors has been well demonstrated. Therefore, in this study, the surface, optical, and electrical analyses of CuSCN were carried out according to the solution process conditions in order to propose optimized film conditions. Various CuSCN solution concentrations were prepared to determine the film surface characteristics and to determine whether the film surface affects the electrical performance of the device. When the CuSCN solution concentration was low, the CuSCN film was not formed and coated in the form of islands, and when the solution concentration was increased, the CuSCN film was formed uniformly, which contributed to improving the conductivity of the device. In addition, a hole-only device was fabricated to demonstrate the role of CuSCN as a hole transport layer.

• Journal of the Semiconductor & Display Technology
• /
• v.23 no.2
• /
• pp.1-5
• /
• 2024

In the electronics industry, a lot of research and development is being conducted on electronic component supply, component alignment and insertion, and automation of soldering on the back side of the PCB for automatic PCB assembly. Additionally, as the use of electronic components increases in the automotive component field, there is a growing need to automate the alignment and insertion of components with leads such as transistors, coils, and fuses on PCB. In response to these demands, the types of PCB and parts used have been more various, and as this industrial trend, the quantity and placement of automation equipment that supplies, aligns, inserts, and solders components has become important in PCB manufacturing plants. It is also necessary to reduce the pre-setting time before using each automation equipment. In this study, we propose a method in which a vision system recognizes the type of component and simultaneously corrects alignment errors during the process of aligning and inserting various types of electronic components. The proposed method is effective in manufacturing various types of PCBs by minimizing the amount of automatic equipment inserted after alignment with the component supply device and omitting the preset process depending on the type of component supplied. Also the advantage of the proposed method is that the structure of the existing automatic insertion machine can be easily modified and utilized without major changes.