• 한국전기전자재료학회논문지
• /
• 제13권12호
• /
• pp.1058-1062
• /
• 2000

We investigated resistive superconducting fault current limites (SFCLs) fabricated using YBCO thin films on 2-inch diameter sapphire substrates. Nearly identical SFCL units were prepared and tested. The units were connected in series and parallel to increase the current and voltage ratings. A serial connection of the units showed significantly unbalanced power dissipation between the units. This imbalance was removed by introducing a shunt resistor to the firstly quenched unit. Parallel connection of the units increased the current rating. An SFCL module of 4 units in parallel, each of which has minimum quench current rating. An SFCL module of 4 units in parallel, each of which has minimum quench current 25 A$\_$peak/, was produced and successfully tested at a 220 V$\_$rms/circuit. From the resistance increase, we estimated that the film temperature increased to 200 K in 5 msec, and 300 K in 120 msec. Successive quenches revealed that this system is stable without degradation in the current limiting capability under such thermal shocks as quenches at 220 V$\_$rms/.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.1021-1024
• /
• 1999

In this paper, we propose a modified feedback neural network structure for adaptive control of robot manipulators. The proposed structure is that all of network output feedback into hidden units and output units. Learning algorithm is standard back-propagation algorithm. The simulation showed the effectiveness of using the new neural network structure in the adaptive control of robot manipulators.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.715-718
• /
• 2005

Mobile devices is getting to include more functions according to the demand of digital convergence. Applications based on 3D graphic calculation such as 3D games and navigation are one of the functions. 3D graphic calculation requires heavy calculation. Therefore, we need dedicated 3D graphic hardware unit with high performance. 3D graphic calculation needs a lot of complicated floating-point arithmetic operation. However, most of current mobile 3D graphics processors do not have efficient architecture for mobile devices because they are based on those for conventional computer systems. In this paper, we propose arithmetic units for special functions of lighting operation of 3D graphics. Transcendental arithmetic units are designed using approximation of logarithm function. Special function units for lighting operation such as reciprocal, square root, reciprocal of square root, and power can be obtained. The proposed arithmetic unit has lower error rate and smaller silicon area than conventional arithmetic architecture.

• Transactions on Electrical and Electronic Materials
• /
• 제18권2호
• /
• pp.111-118
• /
• 2017

The increased diversity of different types of energy sources requires moving towards smart distribution networks. This paper proposes a probabilistic DG (distributed generation) units planning model to determine technology type, capacity and location of DG units while simultaneously allocating ESS (energy storage systems) based on pre-determined capacities. This problem is studied in a wind integrated power system considering loads, prices and wind power generation uncertainties. A suitable method for DG unit planning will reduce costs and improve reliability concerns. Objective function is a cost function that minimizes DG investment and operational cost, purchased energy costs from upstream networks, the defined cost to reliability index, energy losses and the investment and degradation costs of ESS. Electrical load is a time variable and the model simulates a typical radial network successfully. The proposed model was solved using the DICOPT solver under GAMS optimization software.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.178.2-178
• /
• 2001

Today, many electronic devices and ECUs (Electronic Control Units) are used in the automotive body control systems. It becomes more common that these devices exchange data with others through an in-vehicle network. Automobile manufacturers concentrate their efforts on development of body control systems based on networks in order to save cost and to increase flexibility and safety. OSEK/VDX has been founded as a joint project in German and French automotive industry aiming at an industry standard for an open-ended architecture for distributed control units in vehicles OSEK/VDX consists of Communication (specification of data exchange within and between control units), Network Management specification of Configuration determination and monitoring and Operating System (specification of realtime executive for ECU software ...

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1998년도 춘계학술발표회논문집(1)
• /
• pp.417-422
• /
• 1998

he Reactor Coolant Gas Vent System(RCGVS) design for Ulchin Nuclear Power Plant Units 3&4(UCN 3&4) has been improved from the Yonggwang Nuclear Power Plant Units 3&4(YGN 3&4) based on the evaluation results for depressurization capability tests performed at YGN 3&4. There has been a series of plant safety analyses for Natural Circulation Cooldown(NCC) event and thermo-dynamic analyses with RELAP5 code for the steam blowdown Phenomena in order to optimize the orifice size of UCN 3&4 RCGVS. Baesd on these analyses results, the RCGVS orifice size for UCN 3&4 has been reduced to 9/32 inch from the l1/32 inch for YGN 3&4. The depressurization capability tests, which were performed at UCN 3 in order to verify the FSAR NCC analysis results, show that the RCGVS depressurization rates are being within the acceptable ranges. Therefore, it is concluded that the orificed flow path of UCN 3&4 RCGVS is adequately designed, and can provide the safety-grade depressurization capability required for a safe plant operation.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.711-714
• /
• 2005

We propose floating point arithmetic units for geometry operation of mobile 3D graphic processor. The proposed arithmetic units conform to the single precision format of IEEE standard 754-1985 that is a standard of floating point arithmetic. The rounding algorithm applies the nearest toward zero form. The proposed adder/subtraction unit and multiplier have one clock cycle latency, and the inversion unit has three clock cycle latency. We estimate the required numbers of arithmetic operation for Viewing transformation. The first stage of geometry operation is composed with translation, rotation and scaling operation. The translation operation requires three addition and the rotation operation needs three addition and six multiplication. The scaling operation requires three multiplication. The viewing transformation is performed in 15 clock cycles. If the adder and the multiplier have their own in/out ports, the viewing transformation can be done in 9 clock cycles. The error margin of proposed arithmetic units is smaller than $10^{-5}$ that is the request in the OpenGL standard. The proposed arithmetic units carry out operations in 100MHz clock frequency.

• 한국전자통신학회논문지
• /
• 제8권1호
• /
• pp.49-54
• /
• 2013

본 논문에서는 대략 250 km 이상 떨어져 있는 한국과 일본의 대기 채널 환경에 대한 분석을 하였으며, 대기 굴절도 변화량에 따르는 한일간의 채널 환경에 Radio Duct 현상이 발생하고 있으며, 그로 인한 전파 월경으로 채널 간섭이 발생하고 있음을 확인하였다. 일본 NHK에서 측정한 한국채널 수신전계강도 실험결과를 바탕으로 인접국간 전파예측모델 P 1546의 유효한 굴절도 변화량 보정치로 1% 시간율에서 -91.80 [N-units/km], 10% 시간율에서 -43.92 [N-units/km], 50% 시간율에서 -586.19 [N-units/km]의 보정된 굴절도 변화량을 제시하였으며, 제시된 굴절도 변화량은 한일간의 대기 채널 환경을 반영하는 실질적인 전파모델 예측수행에 기여할 것으로 기대된다.

• 한국전자통신학회논문지
• /
• 제12권6호
• /
• pp.1181-1188
• /
• 2017

수체의 단수와 기본단수계는 RSA 암호계에서는 400자리 이상의 큰 수가 소수인지를 판별하는 소수판정법과 그 수를 소인수분해하는 데에 사용되는 다양한 수체선별법에 사용되며, 복소이차체를 기반으로 하는 암호계에서는 이데알의 곱셈과정과 류수(class number)를 계산하는 과정 등 다양한 암호계에서 사용되고 있다. 본 논문에서는 기본단수계를 이용하는 암호계의 구현시간과 공간을 줄이기 위하여, 수체의 기본단수계의 존재성을 증명한 Dirichlet의 정리와 몇 가지 기본단수계의 성질을 중심으로 우리가 제안하는 기본단수계의 생성 과정을 소개한다. 그리고 그에 따른 기본단수계의 H/W 구현의 시간과 공간을 최소화할 수 있는 효율적인 기본단수계의 생성알고리즘과 그 알고리즘을 H/W 상에서 구현한 결과를 제시한다.

• 제어로봇시스템학회논문지
• /
• 제16권6호
• /
• pp.524-531
• /
• 2010

The automobile networks consist of the communication bus systems which become independent and heterogeneous each other. Most often, the CAN buses are implemented in a car in order to connect all the electronic control units in various ways. Thus, some gateways are necessary for exchanging the useful information between electronic control units on the buses. The automobile body networks group is divided into two kinds on a large scale, namely the low-speed bus and the high-speed bus. To interchange messages between the two, a CAN signal gateway is designed and implemented in a miniature scale. A network analyzer (called "Vehicle spy") and an oscilloscope monitor network situation to confirm the due operation of CAN signal gateway. The efficiency of the designed gateway is evaluated. The more message thread increased, the more efficiency decreased.