• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.05a
• /
• pp.202-205
• /
• 1996

In this paper it is researched a relation between network structures and electrical properties - especially dielectric characteristics with changing of network structure. It is resulted that the specimens which have single network structures have smaller dielectric loss than SIN specimens but have relatively larger dependency to variation of temperature and frequency. For that reason formation of structures is attained by introducing of SIN to insulating materials. therefore it is counted that introduction of multiple structure including SIN is necessary to improve heat proof and electrical properties.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.8
• /
• pp.1099-1105
• /
• 2018

Wireless sensor networks have been shown to be an effective method for health monitoring of civil structures. In this paper a wireless strain sensor system which will allow easier collection of accurate strain signals in small sized structures is described. The experiment result shows that the developed wireless sensor system and the proposed network system are fit for health & safety monitoring and control of structures.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.135-135
• /
• 2013

The electronic and adsorption structures of Mg and p-tert-butylcalix[4]arene (p-TBCA) adsorbed onto a Ge(100) surface under a variety of sample conditions were characterized using high-resolution photoemission spectroscopy (HRPES) and their corresponding DFT calculation results. Interestingly, after 0.10 ML p-TBCA molecules had been adsorbed onto a Ge(100) surface, subsequent adsorption of a small amount of metallic Mg (~0.10 ML) resulted in the formation of a capped structure inside the pre-adsorbed p-TBCA molecules. The adsorption structures resulting from further deposition of Mg (~0.50 ML) onto the Ge(100) surface were monitored based on the surface charge state and Mg 2s core level spectrum. Work function measurements clearly indicated the electronic structures of the Mg and p-TBCA adsorbed onto the Ge(100) surface. Moreover, we confirmed that three different adsorption structures are experimentally favorable at room temperature through DFT calculation results.

• Structural Engineering and Mechanics
• /
• v.8 no.4
• /
• pp.401-410
• /
• 1999

A method of optimum design based on reliability for antenna structures is presented in this paper. By constructing the equivalent event, the formula is derived for calculating the reliability of reflector accuracy of antenna under the action of random wind load. The optimal model is developed, in which the cross sectional areas of member are treated as design variables, the structure weight as objective function, the reliability of reflector accuracy and the strength or stability of structural elements as constraints. The improved accelerated convergence gradient algorithm developed by the author is used. The design results show that the method in this paper is feasible and effective.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.2
• /
• pp.241-245
• /
• 2007

The electronic structures of the new organic conducting salts, the β'- and β''-phases of (BEDT-TTF)2[(IBr2)0.2(BrICl)0.1(ICl2)0.7], were examined by calculating their electronic band structures, Fermi surfaces and HOMO-HOMO interaction energies using the extended Huckel tight binding method. On the basis of these calculations, we probed why the β'-phase is semiconducting while the β ''-phase is metallic.

• Journal of the Korean Vacuum Society
• /
• v.12 no.S1
• /
• pp.104-106
• /
• 2003

In this study, the electronic structures and physical properties of Ni$_2$MnGa alloy films and their dependence on the order-disorder structural transitions were investigated. The results show that the ordered films behave nearly the same as the bulk $Ni_2$MnGa alloy, including the martensitic transformation at 200 K. Unexpectedly, the disordering in $Ni_2$MnGa alloy films does not lead to any appreciable magnetic ordering down to 4 K. An annealing of the disordered films restores the ordered structure with an almost full recovery of the magnetic and the transport properties of the ordered $Ni_2$MnGa alloy films. A possible explanation of the disappearance of magnetic moment in the disordered film is given by using the ab initio first-principles electronic-structure calculations.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.7
• /
• pp.509-512
• /
• 2010

The thermal distribution of 2D and 3D p-n photovoltaic diode structures with and without surface texturing has been studied. By analysis of the numerical simulation results of the I-V characteristics and lattice temperature distributions the effect of different texturing structures on the characteristics of silicon p-n photovoltaic devices has been studied systematically. The efficiency of the device having surface texturing shows more than ~2% enhancement compared to the reference devices which did not have texturing. In addition, the effect of the density of the texturing groove has been studied and it has been confirmed that the texturing structure not only improves the light trapping but also plays an important role in the heat radiation.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.4
• /
• pp.341-344
• /
• 1995

Laser-induced fluorescence (LIF) excitation spectra were measured for fluorene (FR) cooled in pulsed supersonic expansions of He in the range 283.7-296.7 nm. Ab initio studies of FR have also been carried out for determining the electronic and vibrational structures by using the standard 3-21G basis sets. In the LIF excitation spectra of FR, highly resolved vibronic bands are observed having the band origin of 33,791 cm-1. The vibrational bands above the electronic origin were assigned on the basis of the well-characterized electronic vibrational bands reported previously and of normal modes of vibrations derived by our HF/3-21G calculations.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2009.02a
• /
• pp.101-101
• /
• 2009

• Proceedings of the Korean Magnestics Society Conference
• /
• 2003.12a
• /
• pp.164-164
• /
• 2003