• Journal of Advanced Navigation Technology
• /
• v.25 no.6
• /
• pp.433-440
• /
• 2021

The problem of maritime accidents due to the carelessness of fishing vessels, which is affected by the aging of fishing vessel operators. And there is navigation, communication and fish finder that is installed inside the narrow bridge of a fishing vessel. Therefore these system are monitors as many as of each terminal, which is bad influence on obscuring view of front sea from a fishing vessel bridge. In addition a large problem, it is occurs to reduce of the information recognition ability due to the confusion, which is can not check the display information each of screen equipments. Therefore, there has been demand to simply integrated the equipment, and it has wanted the integrated support system of these equipment. The display must be provided on a fishing vessels such as electronic charts, communications equipments and fish detection into one case. In this paper, the integrated system will be installed the GPS plotter, AIS, VHF-DSC, V-pass, fish finder and power supply in the narrow wheelhouse on a fishing vessel, which is configured in one case and operated by multi function display (MFD). The MFD is integrated to simplify for several multi terminals and provided necessary information on a single screen. This integration fishery support system will has improved in sea safety operation and fishery environment of fishing vessels by this implementation.

• Journal of Technology Innovation
• /
• v.26 no.3
• /
• pp.37-68
• /
• 2018

Since the 20th century, automobiles, which are the most common means of transportation, have been evolving as the use of electronic control devices and automotive semiconductors increases dramatically. Automotive semiconductors are a key component in automotive electronic control devices and are used to provide stability, efficiency of fuel use, and stability of operation to consumers. For example, automotive semiconductors include engines control, technologies for managing electric motors, transmission control units, hybrid vehicle control, start/stop systems, electronic motor control, automotive radar and LIDAR, smart head lamps, head-up displays, lane keeping systems. As such, semiconductors are being applied to almost all electronic control devices that make up an automobile, and they are creating more effects than simply combining mechanical devices. Since automotive semiconductors have a high data rate basically, a microprocessor unit is being used instead of a micro control unit. For example, semiconductors based on ARM processors are being used in telematics, audio/video multi-medias and navigation. Automotive semiconductors require characteristics such as high reliability, durability and long-term supply, considering the period of use of the automobile for more than 10 years. The reliability of automotive semiconductors is directly linked to the safety of automobiles. The semiconductor industry uses JEDEC and AEC standards to evaluate the reliability of automotive semiconductors. In addition, the life expectancy of the product is estimated at the early stage of development and at the early stage of mass production by using the reliability test method and results that are presented as standard in the automobile industry. However, there are limitations in predicting the failure rate caused by various parameters such as customer's various conditions of use and usage time. To overcome these limitations, much research has been done in academia and industry. Among them, researches using data mining techniques have been carried out in many semiconductor fields, but application and research on automotive semiconductors have not yet been studied. In this regard, this study investigates the relationship between data generated during semiconductor assembly and package test process by using data mining technique, and uses data mining technique suitable for predicting potential failure rate using customer bad data.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.3
• /
• pp.411-418
• /
• 2017

In the domestic case, although technological capabilities are recognized globally in the IT field, it is actually that the technical capabilities of the domestic leisure ship market which is formed mainly by fishing vessels are not beyond their technical capabilities At the point where the GNP of our country already goes over 22,000 dollars, the demand for the products related to the middle and small leisure boats is gradually increasing, but most of the high added value products depend on the imports from U.S.A. and Europe. And in case of the cars, with the Car Navigation as the start, products which satisfies various demands of the users are coming out in large quantity and now the IT technology is the necessity which can not be lived without in the car industry. Thus, if the digital ship navigator which jointed the recent ICT technology which was applied to the land for the domestic middle and small leisure ships by utilizing the embedded hardware technology and mapping technology which are credible is developed and distributed, it will become not only the opportunity to improve the industry related to middle and small ship IT, but also, the export about overseas market can be expected.

• The Journal of Industrial Distribution & Business
• /
• v.10 no.6
• /
• pp.29-37
• /
• 2019

Purpose - This study intends to analyze Chinese consumers' purchase intention of Korean automobile. The aims of this study investigated to find out how product attributes and brand image affect the consumer's purchase intention of Korean automobiles in China. We consider the product attributes, brand image as evaluation criteria, also recognized as objectives for purchase intention. This study aims to analyze the positive effects on Chinese consumers' purchase intention with the variables by using the research model. Research design, data, and methodology - Based on theory of Purchase Intention, the concept of purchase intention was assessed by two factors: a) product attributes, and b) brand image to test the proposed hypotheses. The survey was conducted for 30 days, from October 17 to November 16 in 2018. With IBM SPSS Statistics 23.0 and IBM SPSS AMOS 23.0, factor analysis and regression, Cronbach's alpha and correlation were tested. 300 samples were used for this analysis. Results - As a main result, product attributes and brand image exerted significant effects on consumer's purchase intention. Thus,

and

were supported. The results showed that the product attributes, brand image had positive effects on purchase intention. The findings of this thesis are as follows: Firstly, automobiles' quality factors were divided into two categories like product properties (price, performance, design, economy, and safety), and brand image (awareness, favorability, reliability, and familiarity). Second, it showed that product properties and brand image had positive impacts on purchase intention of consumer. Conclusions - The impact of product attributes and brand image on consumer perceived value of Korean automobiles in China can be seen as a universal psychology of consumers who trust automobile products such as high quality, technology, ets. The results offer some insights into the extended model and have important managerial implications for Korean automobile enterprise. As the findings of this thesis show, all strategic orientations have significant and positive effects on the ability of innovation. At the same time, automobile company must pay attention to quality. As the relationship between the automobiles' performance and brand image were positive and significant, automobile companies should have comprehensive strategic orientations focused on strengthening these factors.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.151-159
• /
• 2017

The aspect of modern warfare is gradually changing to a network of warfare, and its central information electronic warfare is evolving every day. Recently, domestic equipment of electronic warfare, which have succeeded in domestic localization, are strongly influenced by the nature of the environment. Therefore, the structural reliability of the antenna switching module that connects the mast and antenna of the ES equipment is the most important. This study proposed a structure that has an improved structure of antenna switching module by currently analyzing the structure of the antenna switching module and the environmental influence. By modifying the structure of the antenna switching module welding method and part of the reinforcement block, the structure was improved and the validity of the improved antenna switching module was simulated using a load test. The simulation showed that the safety factors of antenna switching module welding point and reinforced block part was enhanced 5.3 and 1.5 times compared to the existing values. These values were verified by load (181kg) test results, which was each 3.7Mpa and 64.4Mpa. The load test results were similar to the simulation results and load supporting capacity of the proposed antenna switching module was enhanced.

• Journal of Digital Convergence
• /
• v.11 no.4
• /
• pp.221-227
• /
• 2013

RFID is an automatic identification technology that can control a range of information via IC chips and radio communication. Also known as electronic tags, smart tags or electronic labels, RFID technology enables embedding the overall process from production to sales in an ultra-small IC chip and tracking down such information using radio frequencies. Currently, RFID-based application and development is in progress in such fields as health care, national defense, logistics and security. RFID structure consists of a reader that reads tag information, a tag that provides information and the database that manages data. Yet, the wireless section between the reader and the tag is vulnerable to security issues. To sort out the vulnerability, studies on security protocols have been conducted actively. However, due to difficulties in implementation, most suggestions are concerned with theorem proving, which is prone to vulnerability found by other investigators later on, ending up in many troubles with applicability in practice. To experimentally test the security of the protocol proposed here, the formal verification tool, CasperFDR was used. To sum up, the proposed protocol was found to be secure against diverse attacks. That is, the proposed protocol meets the safety standard against new types of attacks and ensures security when applied to real tags in the future.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.3
• /
• pp.421-432
• /
• 2020

This paper proposes a 2-kW solid-state power amplifier (SSPA) developed by employing power amplifier pallets designed using gallium-nitride high electron mobility transistors, which is used in S-band military radars and to replace existing traveling-wave tube amplifier (TWTA). The SSPA consists of a high-power amplifier module, which combines eight power amplifier pallets, a drive amplifier module, a digital control module, and a power supply unit. First, the amplifier module and component were integrated into a small package to account for space limitations; next, an on-board harmonic filter was fabricated to reject spurious components; and finally, an auto gain control system was designed for various duty ratios because recent military radar systems are all active phase radars using the pulse operation mode. The developed SSPA exhibited a max gain of 48 dB and an output power ranging between 63-63.6 dBm at a frequency band of 3.1 to 3.5 GHz. The auto gain control function showed that the output power is regulated around 63 dBm despite the fluctuation of the input power from 15-20 dBm. Finally, reliability of the developed system was verified through a temperature environment test for nine hours at high (55 ℃) / low (-40℃) temperature profile in accordance with military standard 810. The developed SSPA show better performance such as light weight, high output, high gain, various safety function, low repair cost and short repair time than existing TWTA.

• Korean Journal of Food Science and Technology
• /
• v.38 no.3
• /
• pp.325-330
• /
• 2006

To determine freshness and detect changes in quality of beef and pork during storage, we manufactured a freshness indicator and monitored the surface pH, volatile basic nitrogen (VBN), thiobarbituric acid reacted substance (TBARS), total bacterial counts, electronic nose analysis, and sensory evaluation. Both beef loin and pork belly had a change in the color of the freshness indicator after storage of 6 days at $2^{\circ}C$. VBN and TBARS levels and total bacterial counts reached the decay point at the time of the color change of the freshness indicator attached to the surface of the beef and pork samples. Sensory evaluation also indicated that the samples were unacceptable by an 'off' odor on day 6 of storage. There were significant differences in electronic nose analysis for samples from day 0, day 6, and day 10 of storage. These results suggest that this freshness indicator should be useful in determining the expiration date of beef and pork products during marketing by indicating the microbial safety as well as the physicochemical and sensory changes.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.5
• /
• pp.39-48
• /
• 2016

One of the major trends of automotive networking architecture is the introduction of automotive Ethernet. Ethernet is already used in single automotive applications (e.g. to connect high-data-rate sources as video cameras), it is expected that the ongoing standardization at IEEE (IEEE802.3bw - 100BASE-T1, respectively IEEE P802.3bp - 1000BASE-T1) will lead to a much broader adoption in future. Those applications will not be limited to simple point-to-point connections, but may affect Electric/Electronic(EE) Architectures as a whole. It is agreed that IP based traffic via Ethernet could be secured by application of well-established IP security protocols (e.g., IPSec, TLS) combined with additional components like, e.g., automotive firewall or IDS. In the case of safety and real-time related applications on resource constraint devices, the IP based communication is not the favorite option to be used with complicated and performance demanding TLS or IPSec. Those applications will be foreseeable incorporate Layer-2 based communication protocols as, e.g., currently standardized at IEEE[13]. The present paper reflects the state-of-the-art communication concepts with respect to security and identifies architectural challenges and potential solutions for future Ethernet Switch-based EE-Architectures. It also gives an overview and provide insights into the ongoing security relevant standardization activities concerning automotive Ethernet. Furthermore, the properties of non-automotive Ethernet security mechanisms as, e.g., IEEE 802.1AE aka. MACsec or 802.1X Port-based Network Access Control, will be evaluated and the applicability for automotive applications will be assessed.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.2
• /
• pp.405-410
• /
• 2018

Distribution of a series of procedure for establishment and revision for various instructions on information security for public institutions and diversified process of performance system following the compliance with the instruction are applied to the integrated procedure that any revision or change has led to the studies that are applied on the basis of all environment requirements and the facilitation of such studies in the integrated procedure for the entire information security. However, as the difference of possessing the work territory for each institution, maintaining and securing the security with the heterogeneous type for subject, the information still displays the issues to link to a series of process to the procedure to secure the foregoing as stability, In addition, the notice should be made by the public institutions for the result structured and notified on the basis of budget and the additional time and expenses for re-distributing to the private institutions would be another issue for the part to accomplish the purpose of such study. Therefore, under this study, the subject of information security of similar institutions should be sorted out and statistically classified, and it proposes the integration procedure through a series of diversity and multi-change process and summarize the same in the proposed procedure to engage in studies to secure the optimal stability.