• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.4
• /
• pp.244-248
• /
• 2018

We propose a method for improving the reliability of a solar cell by applying a fluorinated surface coating to protect the cell from the outdoor environment using an atmospheric pressure plasma (APP) treatment. An APP source is operated by radio frequency (RF) power, Ar gas, and $O_2gas$. APP treatment can remove organic contaminants from the surface and improve other surface properties such as the surface free energy. We determined the optimal APP parameters to maximize the surface free energy by using the dyne pen test. Then we used the scratch test in order to confirm the correlation between the APP parameters and the surface properties by measuring the surface free energy and adhesive characteristics of the coating. Consequently, an increase in the surface free energy of the cover glass caused an improvement in the adhesion between the coating layer and the cover glass. After treatment, adhesion between the coating and cover glass was improved by 35%.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.138-139
• /
• 2009

폴리머 기판위에서 ICP-RIE 방법을 이용하여 $O_2$ 플라즈마 전처리효과에 따른 GZO박막의 전기적, 광학적인 특성을 고찰 하였다. ICP-RIE 방법을 이용하여 폴리머 기판 위에 $O_2$ 플라즈마 전처리의 공정 값은 공정압력은 20 mTorr, 파워는 100 W로 하고 변수로는 시간을 60초 ~ 600초로 하였다. $O_2$ 플라즈마 전처리한 기판위에 RF Sputtering 방법을 이용하여 4인치의 GZO(ZnO: 95 wt%, $Ga_2O_3$: 5 wt%) 타겟을 사용하여 공정압력은 5 mTorr, 파워는 150 W, 박막의 두께는 500 nm의 조건으로 박막을 증착하였다. PET 기판의 600초의 $O_2$ 플라즈마 처리 후 증착한 GZO 박막의 비저항이 $6.2\times10^{-3}\;{\Omega}$-cm이었고, PEN 기판의 120초의 $O_2$ 플라즈마 처리 후 증착한 GZO 박막의 비저항이 $1.1\;{\times}\;10^{-3}\;{\Omega}$-cm이었다. 또한 300 nm 이하의 자외선 영역에서는 뛰어난 광 차단 효과를 가지고 있었으며, 가시광선 영역 (400 nm ~ 700 nm)에서 증착 된 시편들이 80 % 광 투과율을 나타내었다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.7
• /
• pp.647-651
• /
• 2005

We studied the external pressure-stable advanced frnge field switching (FFS) pixel design with 3 slit sructue. In this mode, a patterned pixel slit is partitioned into 3 areas, namely, two edges and a center, where the edge slit angle is larger than the center slit angle. Thus the reverse twist region in the pixel edge is reduced comparing to the conventional FFS mode so that the LC dynamics in this region becomes very stable. And also, when the external pressure is applied to the panel at the high voltage, the disclination lines (DLs) were barely intruded into active area. Therefore, the structure is use for the pen based system such as the tablet personal computer (PC), personal digital asistant (PDA).

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.4
• /
• pp.306-311
• /
• 2000

The purpose of this study is to research and develop solid polymer electrolyte(SPE) for Li polymer battery. The temperature dependence of conductivity impedance spectroscopy and electrochemical properties of PDF/PAN electrolytes as a function of a mixed ratio were reported for PVDF/PAN based polymer electrolyte films which were prepared by thermal gellification method of preweighed PVDF/PAN plasticizer and Li salt. The conductivity of PVDF/PAN electrolytes was 10$\^$-3/S/cm. 20PVDF5PEN LiCiO$\_$4//PC$\_$10//EC$\_$10/ electrolyte has the better conductivity compared to others. 20PVDF5PANLICIO$\_$4//PC$\_$10//EC$\_$10/ electroylte remains stable up to 5V vs. Li/Li$\^$+/. Steady state current method and ac impedance were used for the determination of transference numbers in PVDF/PAN electrolyte film. The transference number of 20PVDF5PANLiCO$\^$4//PC$\_$10//EC$\_$10/ electrolyte is 0.48.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.423-424
• /
• 2008

A facing target sputtering (FTS) equiment is fabricated and its process characteristics are investigated to search for the possibility of applications to film passivation system for organic light emitting diodes (OLEDs). We report that the FTS system can prepare a high quality $ZrO_2$ films with a dense micro structure and an excellent uniformity less than 5% and a high transmittance over an average 80% in the visible range. We suggest that the FTS is one of the suitable deposition techniques for the thin film passivation layer of OLEDs and the gas barrier layer of polymer substrate.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1832-1835
• /
• 1997

Off-line programming systems are widely spread in assembly lines of minute electronic products to huge offshore structures. Any OLP system has to be calibrated before the on-line robot tasks are performed because there are inherent differences between the CAD model on OLP and the real robot workspace. This paper uses simple geometric expressions to propose a calibration method applicable to an OLP for SCARA robots. A positioning task on the two-dimensional horizontal surface was used in the error analysis of a SCARA robot and the anaysis shows that the inaccuracy results from the two error sources non-zero offset angles of two rotational joints at the zero return and differences in link lengths. Pen marks on a sheet of plotting paper are used to determine the accurate data on the joint centers and link dimensions. The calculated offset angles and link lengths are fed back to the OLP for the calibration of the CAD model of the robot and task environments.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.9
• /
• pp.1781-1785
• /
• 2007

We propose a new enhanced graphical user interface and algorithm for dynamic signature verification using Smart-phone. Also, we describe the performance results of our dynamic signature verification system, which determine the authentication of signatures by comparing and analyzing various dynamic data shape of the signature, writing speed, slant of shape, and the order and number of strokes for personal signatures using an electronic pen, expecting the system to be understood and utilized widely in the industrial field.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.6
• /
• pp.886-894
• /
• 2012

Well-designed housing systems are important from the viewpoint of animal welfare and improvement of meat production. In this study, we investigated the effects of outdoor housing of pigs on their behavior, cortisol levels, and meat characteristics. Two groups that were born and raised in a spacious outdoor pen ($4{\times}10$ m for every two sows) or a minimum-sized standard pen in a piggery ($1.9{\times}2.2$ m for every sow) were studied. When their behaviors at the age of 2 to 3 wk were observed, the number of rooting episodes tended to be larger (p = 0.0509) and the total time of rooting tended to be longer (p = 0.0640) in the outdoor-housed piglets although the difference was not significant. Basal salivary cortisol levels of the outdoor piglets at the age of 4 wk were significantly lower than those of the indoor piglets ($5.0{\pm}0.59$ ng/ml vs. $11.6{\pm}0.91$ ng/ml, 30 min after treatment), although their plasma cortisol levels were similar ($53.3{\pm}3.54$ ng/ml vs. $59.9{\pm}4.84$ ng/ml, 30 min after treatment). When the ears were pierced at weaning, plasma and salivary cortisol levels were increased in both groups, even at 15 min after piercing. However, the increase in the outdoor-housed group was significantly less than that in the indoor-housed group. Throughout their lives, body weight and daily gain of the pigs were not significantly different between the two groups. In a meat taste preference test taken by 20 panelists, saltiness, flavor, and color of the outdoor-housed pork were found to be more acceptable. Moreover, when an electronic taste-sensing device was utilized, the C00 and CPA-C00 outputs ($3.78{\pm}0.07$ and $-0.20{\pm}0.023$), which correspond to compounds of bitterness and smells, respectively, were significantly lower in the outdoor-housed pork ($5.03{\pm}0.16$ and $-0.13{\pm}0.009$). Our results demonstrate that the outdoor housing system for piglets induces natural behaviors such as rooting and suppresses the strongest stress reaction of piglets, which could be important for animal welfare. Moreover, the outdoor housing system might change muscle characteristics and improve pork bitterness, flavor, and color. These changes may be preferred by consumers, increasing the sale of these meats.

• Journal of KIISE:Software and Applications
• /
• v.29 no.10
• /
• pp.684-693
• /
• 2002

Electronic Ink is a stored data in the form of the handwritten text or the script without converting it into ASCII by handwritten recognition on the pen-based computers and Personal Digital Assistants(PDAs) for supporting natural and convenient data input. One of the most Important issue is to search the electronic ink in order to use it. We proposed and implemented a script matching algorithm for the electronic ink. Proposed matching algorithm separated the input stroke into a set of primitive stroke using the curvature of the stroke curve. After determining the type of separated strokes, it produced a stroke feature vector. And then it calculated the distance between the stroke feature vector of input strokes and one of strokes in the database using the dynamic programming technique. We did various experiments and our algorithm showed high matching rate over 97.7% for only the Korean script and 94% for the data mixed Korean with the Chinese character.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.6
• /
• pp.1295-1302
• /
• 2021

As the market size of 3D printers increases, the precision of the printout and the speed of operation by the motor are very important issues. In this parer, G-code of each output was generated using a CURA program to compare whether the output of the PLC equipment is the same as that of the Arduino CNC. And after conversion to NC File, a pen was attached to each device to output a result to A4 paper. As a result, the output time was measured to be 1m 39s for PLC equipment and 2m 5s for Arduino CNC. In addition, it was confirmed that the 2D output was equally from the two equipments.