• Journal of Sensor Science and Technology
• /
• v.32 no.3
• /
• pp.180-186
• /
• 2023

Test devices can perform various functions, such as research on detection targets, sensors that detect detection targets, combined products containing sensors, and certification for the launch of combined products. However, the scope of use of test devices is limited because they perform only a single role or could only serve a particular purpose in the past. Therefore, studies on test devices that can perform various functions, such as research on detection targets, sensors that detect detection targets, combined products containing sensors, and certification for the release of combined products are necessary. Accordingly, this study proposes a test device that can increase the scope of use in the technical field of electric fires. In addition, we examine various outcomes of the proposed test device.

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.528-531
• /
• 2004

This paper presents the design and implementation of a QoS based IrDA in mobile phones. The IrDA standards have arised from the need to connect various mobile devices together. But currently, we have a difficult to connecting various mobile devices together. The difficult thing is to adjust the minimum turn around time. The minimum turn around time in IrDA deals with the time needed for a receiver circuit to recover following saturation by transmissions from the same device (turn around latency). This parameter corresponds to the required time delay between the last byte of the last frames sent by a station and the point at which it is ready the first byte of a frame from another station. This parameter comes into play when the link is turned around and is negotiated independency for each station. We solve this matter by using the Dynamic Adjustment Algorithm (DAA). The dynamic adjustment algorithm adjusts the minimum turn around time according to the numbers of devices. We apply our direct adjustment algorithm to our QoS based IrDA in mobile phones and show the improved performance of connection with various mobile phones together.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.12
• /
• pp.95-103
• /
• 2007

This paper presents a liquid cooling concept for heat rejection of high power electronic devices existing in notebook computers etc. The design, fabrication, and performance of the planar ECF pump and farced-liquid cooling system are summarized. The electro-conjugate fluid (ECF) is a kind of dielectric and functional fluids, which generates jet flows (ECF-jets) by applying static electric field through a pair of rod-like electrodes. The ECF-jet directly acts on the working fluid, so the proposed planar ECF pump needs no moving part, produces no vibration and noise. The planar ECF pump, consists of a pump housing and electrode substrate, achieves maximum flow rate and output pressure of $5.5\;cm^3/s$ and 7.2 kPa, respectively, at an applied voltage of 2.0 kV. The farced-liquid cooling system, constructed with the planar ECF pump, liquid-cooled heat sink and thermal test chip, removes input power up to 80 W keeping the chip surface temperature below $70\;^{\circ}C$. The experimental results demonstrate that the feasibility of forced-liquid cooling system using ECF is confirmed as an advanced cooling solution on the next-generation high power electronic devices.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1539_1540
• /
• 2009

본 논문에서는 Porous Au-Pt 전극을 기반으로 연료전극과 공기전극으로 구성된 초소형 메탄올 센서를 설계 및 제작하고 그 특성을 분석해 보았다. 제안된 Porous Au-Pt 전극은 Porous 구조의 금속을 만드는 방법 중 하나인 Templating기법을 적용하여 수백나노 크기의 Pore들을 가진 Porous Au 전극을 제작하였고 그 위에 수 나노 크기의 Pt particles을 전해 도금하여 제작되었다. 고분자 전해질막 층으로서 Nafion film은 전해 도금한 Porous Au-Pt 전극 사이에 삽입하고 hot Pressing 통하여 센서를 구성하였다. Porous Au-Pt 전극을 기반으로한 전기화학 메탄올 센서는 $0.25\;cm^2$ 의 작은 전극 면적에도 불구하고 넓은 온도 범위 ($20^{\circ}C-100^{\circ}C$) 에서 온도에 따른 뛰어난 선형성(Correlation coefficient = 0.986)을 보였으며, 특히, 일정온도 ($60^{\circ}C$)에서 메탄올 농도 0 M에서 2 M 까지의 전류응답 특성을 측정, 분석 결과 메탄올 농도에 따른 9.6 mA/$mM{\cdot}cm^2$ 의 민감도 및 10 초 이내의 응답시간 특성을 보였다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.8
• /
• pp.1101-1107
• /
• 2013

A light emitting diodes(LED) lighting has been increasingly used due to its low power consumption, long life time, high efficiency, and environment friendly characteristics. Also various power converters has been applied to drive these LED lighting. Among many power converters, a LLC resonant converter could be applied for LED lighting because of its high efficiency and high power density. Furthermore, the function of power factor correction(PFC) might be added. In this paper, 1-stage asymmetrical LLC resonant converter is proposed. The proposed converter performs both input-current harmonics reduction and PFC using the discontinuous conduction mode(DCM). The proposed 1-stage LLC resonant converter approach has the lower voltage stress across switching devices and achieve the zero voltage switching(ZVS) in switching devices. To verify the performance of the proposed converter, simulation and experimental results from a 300[W] prototype are provided.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1163-1168
• /
• 2005

This paper proposes a soft-remote-control (soft-remocon) system based on EMG signals for the Intelligent Sweet Home. The proposed system is applied to Intelligent Sweet Home which was developed to help the independence living of the elderly and physically handicapped individuals. The goal of proposed system is to control home-installed electronic devices such as TV, air-conditioner, curtain and lamp in Intelligent Sweet Home using EMG signals. Features such as VAR and DAMV having good separability performance are selected for pattern classification. FMMNN is adopted as a pattern classifier. Classification results are allowed to a developed remote control module and then corresponding infrared pulses can operate home-installed electronic devices. We concluded that EMG as an input interface for home-installed electronic devices in Intelligent Sweet Home.

• Journal of the Microelectronics and Packaging Society
• /
• v.11 no.2 s.31
• /
• pp.11-16
• /
• 2004

Electronic devices are getting smaller due to integration of electronic chip, and heat generated in electronic devices can cause loss of performance and/or reliability of the devices. In this research, metals such as gold, nickel and copper are plated onto a porous membrane by electroless plating method to make an efficient micro-heatsinks. Electroless plating includes sensitization and activation steps in pre-treatment steps. A polycarbonate(PC) membrane was sensitizied, activated and deposited in each metal solution for plating. Among manufactured microfibrils, heat transfer and radiation properties of Ni-microfibril with high surface area were more effective than those of $Au^-$ and Cu-microfibril.

• Journal of the Microelectronics and Packaging Society
• /
• v.15 no.1
• /
• pp.39-44
• /
• 2008

In this paper, fully embedded 2.4GHz WLAN band pass filter (BPF) was investigated into a multi-layered organic packaging substrate using high Q spiral stacked inductors and high Dk MIM capacitors for low cost RF System on Package (SOP) applications. The proposed 2.4GHz WLAN BPF was designed by modifying chebyshev second order filter circuit topology. It was comprised of two parallel LC resonators for obtaining two transmission zeros. It was designed by using 2D circuit and 3D EM simulators for finding out optimal geometries and verifying their applicability. It exhibited an insertion loss of max -1.7dB and return loss of min -l7dB. The two transmission zeros were observed at 1.85 and 6.7GHz, respectively. In the low frequency band of $1.8GHz{\sim}1.9GHz$, the stop band suppression of min -23dB was achieved. In the high frequency band of $4.1GHz{\sim}5.4GHz$, the stop band suppression of min -l8dB was obtained. It was the first embedded and the smallest one of the filters formed into the organic packaging substrate. It has a size of $2.2{\times}1.8{\times}0.77mm^3$.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1474-1475
• /
• 2008

본 논문에서는 nanoporous Pt (Platinum) 전극을 이용한 무효소 혈당센서의 생체 적합성 및 전류응답 특성 향상을 위해 다양한 패키징 방법이 제안되었다. 생체적합성을 갖는 Nafion 멤브레인을 dipping, spin coating, chemical bonding 방법으로 패키징 한 후, 다양한 글루코오스 농도의 혈장, 전혈에서 특성을 분석, 비교하였다. 단백질 등이 포함되지 않은 환경에서 spin coating 방법으로 패키징한 센서의 전류응답 특성은 가장 좋았지만, 혈장 및 전혈에서는 dipping, chemical bonding 방법으로 패키징한 센서의 전류응답 특성에 미치지 못했다. Nafion film을 센서와 chemical bonding한 센서의 혈장에서 sensitivity 는 0.32 ${\mu}A/mM{\cdot}cm^2$ 이었다. 한편, 전혈에서 bare 센서가 급격한 bio-fouling 현상을 보이는 반면 패키징한 센서는 글루코오스 농도에 따라 일정한 전류변화를 보였다. 이는 Nafion을 이용하여 패키징한 무효소 혈당 센서가 생체환경에 적합할 뿐 아니라 생체이식형 및 연속 측정 가능한 시스템에 적용 가능함을 보여준다.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1384-1385
• /
• 2008

본 논문에서는 내장된 수동형 트리플렉서와 듀얼 밴드/트라이모드 RF 모듈을 PCB에 내장시켜서 북미향 CDMA용 부품으로 제작하였다. 수동형 트리플렉서는 모든 수동 소자들을 다층 PCB 기판 안에 내장시키고 그 위에 GPS용 SAW 대역통과필터를 이용하여 설계 및 제작하였다. 8개의 인덕터와 커패시터로 이루어진 수동 회로는 다이플렉서와 병렬 공진기, 임피던스 매칭 회로로 구성되어 있다. CDMA용 듀얼밴드/트라이모드 RF 모듈은 트리플렉서와 CDMA, PCS용 듀플렉서를 테스트 보드 위에 조합하여 제작하였다. 측정된 주파수 특성들은 시뮬레이션 값과 비교적 일치하였다. 트리플렉서와 듀얼 밴드/트라이모드 RF 모듈은 각기 $3{\times}4mm^2$와 ${7\times}7mm^2$의 작은 크기였다. 설계 및 제작된 소자들은 고성능과 경박단소화, 저가화 등의 이점이 있기 때문에, 북미향 CDMA용 단말기의 응용부품에 적용될 수 있을 것으로 예상된다.