• 제목/요약/키워드: Electronic detonation

검색결과 7건 처리시간 0.029초

터널굴착 시 전자뇌관과 비전기뇌관 발파에 관한 비교 연구 (Study on comparison with electronic detonation blasting and non-electric detonation blasting)

  • 윤지선;임수환;이진무;배상훈
    • 한국터널지하공간학회 논문집
    • /
    • 제10권2호
    • /
    • pp.185-191
    • /
    • 2008
  • 본 연구에서는 정밀한 초시설정이 가능한 전자뇌관을 이용하여 터널에서의 다단 시차 분할발파(OBM)를 실시하며 대형 대단면 지하 공간 창출 요구에 발맞추어 기존뇌관(비전기뇌관)과의 비교를 통해 진동 소음 저감효과와 시공성, 효율성을 비교 검토하자 하였다. 본 연구를 통해 전자뇌관 적용 시 진동 소음 제어 및 비산거리, 여굴량, 파쇄입도가 비전기뇌관가 비교하여 양호한 결과를 나타냄을 확인할 수 있었다.

  • PDF

Visualization of Underwater Sympathetic Detonation of High Explosives

  • Itoh, Shigeru;Hamada, Toru;Murata, Kenji;Kato, Yukio
    • Journal of Mechanical Science and Technology
    • /
    • 제15권12호
    • /
    • pp.1822-1828
    • /
    • 2001
  • The experiment for the sympathetic detonation (Sudo et al., 1951) (Fukuyama et al., 1958) in water was conducted. Composition B (RDX: 64%, TNT: 36%, Detonation velocity: 7900m/s) was used for both donor (the thickness was 50mm, and the diameter was 31mm) and receptor charges. The distance between the donor and the receptor, and the thickness (5, 7.5, 10mm) of the receptor were varied in the experiments. In order to investigate the basic characteristics of the underwater sympathetic detonation of high explosive, the sympathetic detonation phenomena were visualized by a high-speed camera (HADLAND PHOTONICS, IMACON790) in forms of streak and framing photographs. The 200ns/mm streak velocity was 2㎲. Manganin gauges (KYOWA Electronic INSTRUMENTS CO. SKF-21725) were used for the pressure measurements. The gauges were set under the receptor. The pressures during the complete and incomplete explosions were measured.

  • PDF

Theoretical Studies on Nitramine Explosives with -NH2 and -F Groups

  • Zhao, Guo Zheng;Lu, Ming
    • Bulletin of the Korean Chemical Society
    • /
    • 제33권6호
    • /
    • pp.1913-1918
    • /
    • 2012
  • The nitramine explosives with $-NH_2$ and -F groups were optimized to obtain their molecular geometries and electronic structures at DFT-B3LYP/6-31+G(d) level. The theoretical molecular density (${\rho}$), heat of formation (HOF), detonation velocity ($D$) and detonation pressure ($P$), estimated using Kamlet-Jacobs equations, showed that the detonation properties of these compounds were excellent. Based on the frequencies scaled by 0.96 and the principle of statistic thermodynamics, the thermodynamic properties were evaluated, which were respectively related with the temperature. The simulation results reveal that 1,3,5,7-tetranitro-1,3,5,7-tetrazocan-2-amine (molecule B1) performs similarly to the famous explosive HMX, and 2-fluoro-1,3,5-trinitro-1,3,5-triazinane (molecule C1) and 2-fluoro-1,3,5,7-tetranitro-1,3,5,7-tetrazocane (molecule D1) outperform HMX. According to the quantitative standard of energetics and stability as an HEDC (high energy density compound), molecules C1 and D1 essentially satisfy this requirement. These results provide basic information for molecular design of novel high energetic density compounds.

파형합성 프로그램 개발 및 현장 적용성 평가 (A Development of Waveform Composition Program and Evaluation of Application on Site)

  • 윤지선;우택규;배상훈
    • 화약ㆍ발파
    • /
    • 제27권1호
    • /
    • pp.38-46
    • /
    • 2009
  • 최근 진동 소음을 저감하는 공법으로 초시의 정확성과 초시부여의 자율성을 가진 전자뇌관을 이용하는 공법(OBM ; Orechestra Blasting)이 소개되었다. 파형합성프로그램은 전자뇌관의 지연초시를 결정할 수 있으며 결정된 초시를 이용하여 실 발파와 유사한 환경에서의 시뮬레이션을 수행, 최적초시 상태의 진동 속도를 예측할 수 있다. 본 연구에서는 파형합성프로그램을 통해 진동을 제어하는 최적초시를 얻고 실제 발파작업 시의 진동치를 예측하고자 하였다.

신뢰성이 향상된 배전급 피뢰기 설계 기술의 동향 (Trend in New Distribution Class Arrester Ground Lead Disconnector Design)

  • 이주홍;윤주호;김인희;최용성;이경섭
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
    • /
    • pp.541-542
    • /
    • 2007
  • The paper also introduces a new Distribution Class ground lead disconnector design that not only extends the claimable detonation range well below the 20 amps specified in industry standards, but is very durable when exposed to severe arrester durability tests. Finally. this paper shows how this next generation disconnector interacts with the connected arrester to improve the overvoltage withstand capability of the arrester assembly. The interaction of the disconnector grading capacitor with the series-connected arrester metal oxide disc elements actually improves the arrester assembly temporary overvoltage withstand capability, making the design less vulnerable to TOV failures. Since the vast majority of distribution class arresters are sold domestically with ground lead disconnectors, this design improvement in the disconnector to improve detonation reliability also translates into a significantly improved distribution class arrester design.

  • PDF

과도방사선 조건에서 PN다이오드소자의 방사선 영향분석 (The Study of Latch-up)

  • 오승찬;정상훈;황영관;이남호
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2013년도 춘계학술대회
    • /
    • pp.791-794
    • /
    • 2013
  • 본 연구에서는 초기 핵 방사선 조건에서 반도체소자의 과도응답특성을 분석하기 위한 선행연구의 일환으로 반도체 소자의 과도방사선에 의한 영향에 대한 주요원인과 반도체의 물성, 설계구조, 공정방식의 조건에 따라 소자내부에 생성되는 광전류 거동특성에 대한 정략적인 분석을 위한 시뮬레이션 분석을 수행하였으며 결과적으로 반도체소자의 설계조건과 입력되는 과도방사선의 선량율에 따른 비선형 특성을 확인하였다.

  • PDF

파이로충격 모사장비 특성분석 (On the Characteristics of Pyroshock Simulator)

  • 전영두;임종민;서상현;정의승;조광래
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2005년도 추계학술대회논문집
    • /
    • pp.172-175
    • /
    • 2005
  • Since, similar to other commercial launch vehicles, various kinds of pyrotechnique devices are used in the KSLV-I(Korea Space Launch Vehicle), the electronic equipment on the vehicle equipment bay is exposed to the sever pyroshock environment during Pyrotechnique device detonation. In order to confirm the survivability of electrical instruments from these pyroshock conditions, shock tests are performed by using a pyroshock simulation during development and qualification phase. In this paper, the pyroshock simulator installed in KARI(Korea Aerospace Research Institute) are briefly introduced, and its performance of pyroshock generating is compared with the measured shock response spectrums from small scaled fairing jettisoning tests. The results show that the pyroshock simulator is still proper to generate severe pyroshocks similar to real pyrotechique detonating conditions, but the redesign on the test jigs is necessary to improve its test performance.

  • PDF