• Convergence Security Journal
• /
• 제20권4호
• /
• pp.169-176
• /
• 2020

Recently, the era in which various services using smart devices are used is sometimes referred to as the so-called "smart era". Among these, Smart Home Service' have not only brought about significant changes in the residential environment and culture, but are evolving very rapidly. and The 'Smart Home Service' provides more convenient services to users through communication between various electronic products in general homes, and has a bright future in the future. In particular,'Smart Home Service' provides various services combined based on IoT(Internet of Things) technology and wired/wireless communication in connection between various devices. However, such a "smart home service" inherits the security vulnerabilities of the underlying technologies such as the Internet of Things and wired and wireless communication technologies, and accidents that lead to the leakage of personal information and invasion of privacy continue to occur. So, it is necessary to prepare a countermeasure and prevention against the weak factors of the underlying technologies. Therefore, this paper is expected to be used as basic data for future application technology development and countermeasure technology by examining various security vulnerability factors of 'Smart Home Service'.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• 제20권3호
• /
• pp.60-67
• /
• 2021

Recently, research attention has been focused on vibration-free vehicles to transport small numbers of expensive electronic products. Vibration-free vehicles can be used to transport expensive test equipment or semiconductors, mainly produced in the domestic IT industry, and can serve as a readily available transportation system for short driving distances due to the increased efficiency on narrow national highways. This study was aimed at developing a Z-Spring to minimize the vibration by installing an air spring instead of the plate spring applied to conventional freight cars and to prevent the damage of the loaded cargo from the shock occurring during movement. The mechanical properties (elastic modulus, tensile strength, and shear strength) of carbon fiber (CF) and glass fiber (GF) prepreg were derived, and ANSYS ACP PrepPost analyses were performed. It was observed that in the case of hybrid composites, the total deformation and equivalent stress are higher than that of CFRP; however, in terms of the unit cost, the hybrid Z-Spring is more inexpensive and durable compared to the GF.

• International Journal of Computer Science & Network Security
• /
• 제22권10호
• /
• pp.97-106
• /
• 2022

Objective. Nanotechnology is spreading among all areas of life, from everyday devices to medicine. The concept of nanotechnology argues that not only can new physical and chemical properties of materials be discovered, but also the new potential of nanostructures when reduced to the nanoscale. The growing interest in the application of nanomaterials in dentistry contributes to the proliferation of the range of nanomaterials used by specialists. The purpose of this review of information sources was to analyze the prospects for the use of nanomaterials in dentistry. Methods. We used the bibliographic semantic method of research, for which we analyzed electronic databases of primary literature sources Scopus, Web of Science, Research Gate, PubMed, MDPI, and MedLine. English-language scientific articles published after 2017 were taken into consideration. Results. According to the results of a search study among modern information primary sources, nanotechnology improves the preventive properties of oral care products, improves the structural-mechanical and aesthetic properties of composite mixtures for dentistry, overcomes the problems of the clinical application of dental implants. Despite the prospects of nanotechnology applications in medicine in general and dentistry in particular, the existing economic and technological problems require a thorough solution for further implementation of nanostructures. Scientific novelty. For the first time, the analysis of modern trends in the application of nanotechnology in dentistry is carried out and the peculiarities of materials are highlighted, the problems and prospects of nanostructures implementation in modern dental implantology are given, physical, chemical, mechanical, and antibacterial properties of nanomaterials are evaluated. The effect of nanomaterials on the microbial adhesion of the tooth or implant surface is described. Practical significance. The presented publication can become a scientific basis for the solution of urgent problems hindering the introduction of nanotechnology into dental practice. Conclusions. Thus, the use of nanostructures opens up great opportunities for the treatment of a wide range of diseases, not only of dental nature but also in medicine in general.

• Journal of Engineering Education Research
• /
• 제26권4호
• /
• pp.22-35
• /
• 2023

As information and communication technology has developed remarkably, it has become possible to analyze various types of large-volume data generated at a speed close to real time, and based on this, reliable value creation has become possible. Such big data analysis is becoming an important means of supporting decision-making based on scientific figures. The purpose of this study is to develop a big data analysis tool that can analyze large amounts of data generated through engineering education. The tasks of this study are as follows. First, a database is designed to store the information of entries in the National Creative Capstone Design Contest. Second, the pre-processing process is checked for analysis with big data analysis tools. Finally, analyze the data using the developed big data analysis tool. In this study, 1,784 works submitted to the National Creative Comprehensive Design Contest from 2014 to 2019 were analyzed. As a result of selecting the top 10 words through topic analysis, 'robot' ranked first from 2014 to 2019, and energy, drones, ultrasound, solar energy, and IoT appeared with high frequency. This result seems to reflect the current core topics and technology trends of the 4th Industrial Revolution. In addition, it seems that due to the nature of the Capstone Design Contest, students majoring in electrical/electronic, computer/information and communication engineering, mechanical engineering, and chemical/new materials engineering who can submit complete products for problem solving were selected. The significance of this study is that the results of this study can be used in the field of engineering education as basic data for the development of educational contents and teaching methods that reflect industry and technology trends. Furthermore, it is expected that the results of big data analysis related to engineering education can be used as a means of preparing preemptive countermeasures in establishing education policies that reflect social changes.

• Journal of the Korean Society for Precision Engineering
• /
• 제13권7호
• /
• pp.167-175
• /
• 1996

Work roll wear in the cold rolling of steel strip is strongly affected by rolling materials, rolling conditions and lubrication. Tests were performed to find the effects of rolling materials under the same lubricating conditions. Surface roughness of cold rolled steel strip as well as the coating technique itself is quite improtant in obtaining high image clarity of electronic products and car outer panels. Therefore this paper reviews for improvement of roughness and peak count about the surface of Cr coated work roll is investigated from the actual temper mill. The conclusions were obtained as follows; 1) Work roll wear in the cold rolling of steel strip is strongly affected by carbon contents of rolling materials, but there is not a separating force and total reduction ratio. 2) The roughness of strip surface is larger in the direction of width than in roll direction. 3) The electro-discharge textured roll has more uniform roughness distribu- tion than shot blasted roll and it's life time is two times longer than shot blasted because it has more harmonic wave roughness, and the higher peak count of surface roughness. 4) The life time of Cr coated work roll is 2 times longer than that of shot blasted work roll and variation of peak count, roughness and life time of Cr coated work roll is similar to electro-discharge texturing work roll. 5) The proper Cr coating thickness is 10 .mu. m at the work roll of temper mill.

• Korea Trade Review
• /
• 제42권1호
• /
• pp.1-25
• /
• 2017

By applying the AHP(Analytic Hierarchy Process), we have analyzed the importance and the order for priorities to the management risk factors of Korean SMEs & Venture companies in China. The major management risk factors of manufacturing companies were the rise in labor costs followed by fierce competition in the marketplace, problems involved with human resource management and the rise in the cost of materials. In the case of companies manufacturing electronic products, the rise of labor costs and alteration in government's tax policy were seen as the main risk factors. In the case of chemical product manufacturing companies, the reinforcement of environmental protection law and in automobile component manufacturing companies, apart from the rise in labor cost, the increase in raw materials costs were analyzed as the main risk factors. While considering the time period, the main risk factors of the companies that entered China in the 1990's were fierce competition and alteration in government's tax policy and for the companies that entered China in the 2000's, increase in raw material cost, the rise in labor cost etc were analyzed to be the main risk management factors.

• Journal of the Korea Organic Resources Recycling Association
• /
• 제31권2호
• /
• pp.5-18
• /
• 2023

As a result of the survey on the emission status of fluorine-based chemicals in Korea, 13 kinds of substances, including hydrogen fluoride (91%) and perfluorocarbons (5%), were emitted in workplaces. By regional groups, about 98% was emitted in the Gyeongbuk, Gyeonggi and Chungcheong regions, and about 98% in three sectors of industry related to manufacture of electronic parts, chemicals and non-metallic mineral products. The detection status of PFOS and PFOA in domestic main rivers was continuously detected in the Nakdong River, the Geum River and the Anseong Stream estuary with high fluorine-related chemical emissions, and four sites of PFOS and two sites of PFOA were detected for the first time in 2021. PFOS and PFOA were continuously detected in relatively high concentrations in the rivers where there were many semiconductor and display related sectors of industry.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 한국환경과학회 2019년도 정기학술대회 발표논문집
• /
• pp.83-83
• /
• 2019

Increasing the CO₂ concentration in the atmosphere induce high temperature and rising sea levels. So the technology that capture and reuse of the CO₂ have been recently become popular. Among other methods, CRR(CO2₂ reduction reaction) is typical method of CO₂ reusing. Electrocatalyst can show more higher efficiencies in CRR than photocatalyst because it doesn't use nature source. Nowadays, finding high efficient electrocatalyst by controlling electronic (affected by stoichiometry) and geometric (affected by atomic arrangement) factors are very important issues. Mono-atomic electro-catalyst has limitations on controlling binding energy because each intermediate has own binding energy range. So the Multi-metallic electro-catalyst is important to stabilize intermediate at the same time. Carbon monoxide(CO) which is our target product and important feedstock of useful products. Au is known for the most high CO production metal. With copper, Not only gold/copper has advantages which is they have FCC packing for easily forming solid solution regardless of stoichiometry but also presence of adsorbed CO on Cu promotes the desorption of CO on Au because of strong repulsion. And gold/copper bi-metal catalyst can show high catalytic activity(mass activity) although it has low selectivity relatively Gold. Actually, multi-metallic catalyst structure control method is limited in the solution method which is takes a lot of time. In here, we introduce CTS(carbo thermal shock) method which is using heat to make MMNP in a few seconds for making gold-copper system. This method is very simple and efficient in terms of time(very short reaction time and using carbon substrate as a direct working electrode) and increasing reaction sites(highly dispersed and mixing alloy structures). Last one is easy to control degree of mixing and it can induce 5 or more metals in one alloy system. Gold/copper by CTS can show higher catalytic activity depending on metal ratio which is altered easily by changing simple variables. The ultimate goals are making CO₂ test system by CTS which can check the selectivity depending on metal types in a very short time.

• Journal of Korea Entertainment Industry Association
• /
• 제13권8호
• /
• pp.335-343
• /
• 2019

Healthy living is an essential element of human happiness. Quality eating provides the basis for life, and the health of livestock, which provides meat and dairy products, has a direct impact on human health. In the case of calves, diarrhea is the cause of all diseases.In this paper, we use a sensor to measure calf 's biometric data to diagnose calf diarrhea. The collected biometric data is subjected to a preprocessing process for use as meaningful information. We measure calf birth history and calf biometrics. The ontology is constructed by inputting environmental information of housing and biochemistry, immunity, and measurement information of human body for disease management. We will build a knowledge base for predicting calf diarrhea by predicting calf diarrhea through logical reasoning. Predict diarrhea with the knowledge base on the name of the disease, cause, timing and symptoms of livestock diseases. These knowledge bases can be expressed as domain ontologies for parent ontology and prediction, and as a result, treatment and prevention methods can be suggested.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• 제16권5호
• /
• pp.256-264
• /
• 2023

Smart farm technology using IoT is one of the technologies that can increase productivity and improve the quality of agricultural products in agriculture, which is facing difficulties due to the decline in rural population, lack of rural manpower due to aging, and increase in diseases and pests due to climate change. . Smart farms using existing IoT simply monitor farms, implement smart plant growers, and have automatic greenhouse opening and closing systems. This paper implements a smart farm system based on MQTT, an industry standard protocol for the Internet of Things, and Node-RED, a representative development middleware for the Internet of Things. First, data is extracted from Arduino sensors, and data is collected and transmitted from IoT devices using the MQTT protocol. Then, Node-RED is used to process MQTT messages and store the sensing data in real time in MongoDB, a representative NoSQL, to store the data. Through this smart farm system, farm managers can use a computer or mobile phone to check sensing information on the smart farm in real time, anytime, anywhere, without restrictions on time and space.