• Journal of the Microelectronics and Packaging Society
• /
• v.13 no.1 s.38
• /
• pp.63-72
• /
• 2006

Mobile products, such as cellular phones, PDA and notebook, are subjected to many different mechanical loads, which include bending, twisting, impact shock and vibration. In this study, a cyclic bending test of the BGA package was performed to evaluate the fatigue life. Special bending tester, which was suitable for electronic package, was developed using an electromagnetic actuator. A nonlinear finite element model was used to simulate the mechanical bending deformation of solder joint in BGA packages. The fatigue life of lead-free (95.5Sn4.0Ag0.5Cu) solder joints was compared with that of lead-contained (63Sn37Pb). When the applied load to the specimen is small, the lead-free solder has longer fatigue life than lead-contained solder. The fatigue crack is initialized at the exterior solder joints and is propagated into the inner solder joints.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.6
• /
• pp.207-213
• /
• 2012

With development of IT technology, B2C Social Commerce makes the change from closed type of transaction to the form of an open trading. Also by dramatically reducing the intermediate distribution and removing distribution costs, it provides goods at unbeatable prices to consumers. Depending on the flow of the times, the business-to-business struggles with the difficulty of PRM management and fast promotion of new products. Therefore, it is required B2B Social Commerce, new platform that can collect distribution and consumption firms in one place which is similar to B2C Social Commerce. Unlike the case of B2C social commerce, B2B Social Commerce should have an essential element, Installment payment system to pay over the period without purchase in accordance with the payment paid as a lump sum. B2B Social Commerce model which is introduced in this study will provide the solution of B2B transaction problems, opening up new markets and bring the expansion of the electronic market.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.spc1
• /
• pp.200-203
• /
• 2005

This study was performed to investigate the differences among three varieties of Mugwort by using the electronic nose. Volatile components from these products were discriminated by the $VaporPrint^{TM}$ without pretreatment. Pattern recognition was carried out, $VaporPrint^{TM}$ analysis showed the differences among locally produced ones. Polar derivative pattern for the collected mugwort using $VaporPrint^{TM}$ between Sajabalssuk and Sajuarissuk had no difference, but Ssajuarissuk nnd Injinssuk had a lot of difference. Thus aroma pattern between locally produced ones could be distinguished.

• Convergence Security Journal
• /
• v.17 no.4
• /
• pp.3-9
• /
• 2017

Recently, Wireless communication has been widely used as a short distance communication medium in various industrial fields as well as communication connection between home appliances due to the appearance of the Internet of Things. And Most commonly used wireless communication media include WiFi, Bluetooth, and NFC. Among them, Bluetooth is widely used for communication between smart devices as well as computer peripheral devices. And Bluetooth in the home network fields is being used to control electronic products. However, since Bluetooth security vulnerabilities are known, more and more attacks are being exploited. As the application range of Bluetooth is expanding, it is necessary to prepare countermeasures accordingly. Therefore, this study investigates the security threat factors of through Bluetooth'attack case and attack technology. And By proposing countermeasures against this problem, we intend to utilize it as data for improving the security of wireless network service in the future.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.5
• /
• pp.2069-2079
• /
• 2012

Background and Objective: A comprehensive overall review of gastric cancer (GC) risk and protective factors is a high priority, so we conducted the present study. Methods: Systematic searches in common medical electronic databases along with reference tracking were conducted to include all kinds of systematic reviews (SRs) about GC risk and protective factors. Two authors independently selected studies, extracted data, and evaluated the methodological qualities and the quality of evidence using R-AMSTAR and GRADE approaches. Results: Beta-carotene below 20 mg/day, fruit, vegetables, non-fermented soy-foods, whole-grain, and dairy product were GC protective factors, while beta-carotene 20 mg/day or above, pickled vegetables, fermented soy-foods, processed meat 30g/d or above, or salty foods, exposure to alcohol or smoking, occupational exposure to Pb, overweight and obesity, helicobacter pylori infection were GC risk factors. So we suggested screening and treating H. pylori infection, limiting the amount of food containing risk factors (processed meat consumption, beta-carotene, pickled vegetables, fermented soy-foods, salty foods, alcohol), stopping smoking, avoiding excessive weight gain, avoidance of Pb, and increasing the quantity of food containing protective components (fresh fruit and vegetables, non-fermented soy-foods, whole-grain, dairy products). Conclusions: The conclusions and recommendations of our study were limited by including SRs with poor methodological bases and low quality of evidence, so that more research applying checklists about assessing the methodological qualities and reporting are needed for the future.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.8 no.4
• /
• pp.110-121
• /
• 2009

It is essential to embed product quality in the design process to win the global competition. Many components found in many products including automobiles and electronic devices are fabricated using sheet metal forming processes. Wrinkle and fracture are two types of defects frequently found in the sheet metal forming process. Reducing such defects is a hard problem as they are affected by many uncontrollable factors. Attempts to solve the problem based on traditional deterministic optimization theories are often led to failures. Furthermore, the wrinkle and fracture are conflicting defects in such a way that reducing one defect leads to increasing the other. Hence, it is a difficult task to reduce both of them at the same time. In this research, a new design method for reducing the rates of conflicting defects under uncontrollable factors is presented by using operating window and a sequential search procedure. A new SN ratio is proposed to overcome the problems of a traditional SN ratio used in the operating window technique. The method is applied to optimizing the robust design of a sheet metal forming process. To show the effectiveness of the proposed method, a comparison is made between the traditional and the proposed methods using simulation software, applied to a design of particular sheet metal forming process problem. The results show that the proposed method always gives a more robust design that is less sensitive to noises than the traditional method.

• Korean Journal of Materials Research
• /
• v.21 no.8
• /
• pp.425-431
• /
• 2011

The industrial manufacturing of YSZ products can be summarized as a three step process: a) hydrolysis of zirconyl chloride and mixing of other solutions, b) precipitation, and c) calcination. The addition of ammonia or OH- is essential in the precipitation process. However, a strong agglomeration was observed in the results of an ammonia or OH- addition. Thus, it is necessary to disperse the powders smoothly in order to improve the mechanical strength of YSZ. In this study, YSZ was synthesized using the urea stabilizer and hydrothermal method. YSZ powders were synthesized using a hydrothermal method with Teflon Vessels at $180^{\circ}C$ for 24 h. The mole ratio of urea to Zr was 0, 0.5, 1, and 2. The crystal phase, particle size, and morphologies were analyzed. Rectangular specimens ($33\;mm{\times}8\;mm{\times}1{\pm}0.5\;mm$) for three-point bend tests were used in the mechanical properties evaluation. The crystalline of YSZ powders observed a tetragonal phase in the sample with a ratio of Zr:urea = 1:2 addition and a hydrothermal reaction time of 24 h. The average primary particle size of YSZ was measured to be 9 nm to 11 nm. The agglomerated particle size was measured from 15 nm to 30 nm. The three-point bending strength of the YSZ samples was 142.47 MPa, which is the highest value obtained for the Zr:urea = 1:2 ratio addition YSZ sample.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.6
• /
• pp.439-446
• /
• 2008

The medium power system for the recent electronic products that can perform the multi-function requires various multi-output, high-efficiency and low cost characteristics. To cope with these critical issues, a new high-efficiency and cost-effective multi-output LLC resonant converter is proposed in this paper. The proposed converter requires only 1 power switch instead of the bulky and expensive non-isolated DC/DC converter. Therefore, it features a simple structure, lower cost and high-efficiency. Especially, since the proposed converter can ensure the ZVS or ZCS of all power switches, it has very desirable advantages such as more improved EMI characteristics and reduced switching losses. Finally, to confirm the operation, validity, and features of the proposed circuit, experimental results from a SMPS prototype for 42" FHD PDP TV are presented.

• Journal of Powder Materials
• /
• v.22 no.4
• /
• pp.234-239
• /
• 2015

Electronic products are a major part of evolving industry and human life style; however most of them are known to emit electromagnetic waves that have severe health hazards. Therefore, different materials and fabrication techniques are understudy to control or limit transfer of such waves to human body. In this study, nanocomposite powder is dispersed into epoxy resin and shielding effects such as absorption, reflection, penetration and multiple reflections are investigated. In addition, nano size powder (Ni, $Fe_2O_3$, Fe-85Ni, C-Ni) is fabricated by pulsed wire evaporation method and dispersed manually into epoxy. Characterization techniques such as X-ray diffraction, Scanning electron microscopy and Transmission electron microscopy are used to investigate the phase analysis, size and shape as well as dispersion trend of a nano powder on epoxy matrix. Shielding effect is measured by standard test method to investigate the electromagnetic shielding effectiveness of planar materials, ASTM D4935. At lower frequency, sample consisting nano-powder of Fe-85%Wt Ni shows better electromagnetic shielding effect compared to only epoxy, only Ni, $Fe_2O_3$ and C-Ni samples.

• Laser Solutions
• /
• v.11 no.4
• /
• pp.29-34
• /
• 2008

Ultraviolet laser micromachining has increasingly been applied to the electronics industry where precision machining of high-density, multi-layer, and multi material components is in a strong demand. Due to the ever-decreasing size of electronic products such as cellular phones, MP3 players, digital cameras, etc., flexible printed circuit board (FPCB), multi-layered with polymers and metals, tends to be thicker. In present, multi-layered FPCBs are being mechanically cut with a punching die. The mechanical cutting of FPCBs causes such defects as burr on layer edges, cracks in terminals, delamination and chipping of layers. In this study, the laser cutting mechanism of FPCB was examined to solve problems related to surface debris and short-circuiting that can be caused by the photo-thermal effect. The laser cutting of PI and FCCL, which are base materials of FPCB, was carried out using a pico-second laser(355nm, 532nm) and nano-second UV laser with adjusting variables such as the average/peak power, scanning speed, cycles, gas and materials. Points which special attention should be paid are that a fast scanning speed, low repetition rate and high peak power are required for precision machining.