• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 춘계학술대회 논문집
• /
• pp.90-95
• /
• 1995

This paper describes the highly-sensitive Si magnetic sensor using the amplitude modulation in order to real ice the integrated magnetic sensor which to sensor a weak magnetic field. Generally, the most important two parameters in Hall IC which degrade the ability of magnetic detection are the variation of offset according to the variation of temperature and the noise of amplifiers. In this paper, we use a Hall element and compensator to reduce the offset and the nouse of amplifiers by Using amplititude modulation method.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.1103-1106
• /
• 2002

This paper presents SVC which use PAM method and eliminate harmonics. Inverter is connected directly so that SVC improve output voltage waveform into 24 steps. Inverter output waveform THD is reduced to 6.89%. Leading control of reactive power generated in power system is possible. Snubber is added to reduce switching loss.

• Journal of Power Electronics
• /
• 제19권4호
• /
• pp.869-880
• /
• 2019

Due to the inherent feedforward of load current, capacitor current (CC) control shows a fast transient response that makes it suitable for the power supplies used in various portable electronic devices. However, considering the effect of the outer voltage loop, the stable range of the duty-cycle is significantly diminished in CC controlled buck converters. To investigate the stability effect of the outer voltage loop on buck converters, a CC controlled buck converter with a proportion-integral (PI) compensator is taken as an example, and its second-order discrete-time model is established. Based on this model, the instability caused by the duty-cycle is discussed with consideration of the outer voltage loop. Then the dynamical effects of the feedback gain of the PI compensator and the equivalent series resistance (ESR) of the output capacitor on the CC controlled buck converter with a PI compensator are studied. Furthermore, the design-oriented closed-loop stability criterion is derived. Finally, PSIM simulations and experimental results are supplied to verify the theoretical analyses.

• 한국전자통신학회논문지
• /
• 제12권5호
• /
• pp.837-844
• /
• 2017

조석수조에서 수위를 조절하기 위한 위어는 자체에 부착된 2대의 전동실린더에 의해 상하로 이송된다. 이때 발생되는 좌 우 전동실린더의 이동거리 차는 위어의 불균형과 마찰을 일으키므로, 위어는 목표지점으로 이송될 수 없게 된다. 본 연구에서는 위어를 신속하고 정확하게 이송하기 위한 동기제어시스템이 구축된다. 교차결합구조에 기초한 이 동기제어시스템은 두 개의 I-PD제어기와 한 개의 진상보상기로 구성된다. 각 I-PD제어기는 전동실린더가 오버슈트와 입력포화를 발생시키지 않고 위치지령을 정확히 추종하도록, 그리고 진상보상기는 신속하고 안정적으로 동기가 되도록 설계된다. 끝으로 시뮬레이션을 통해 설계된 동기제어시스템이 동기오차의 제거에 효과적임을 나타낸다.

• 한국정보통신학회논문지
• /
• 제21권11호
• /
• pp.2009-2014
• /
• 2017

본 논문에서는 변화하는 루프필터 전압을 시정수 비교기를 사용하여 감지하고, 이의 출력에 따라 루프필터 전압변화를 보상하여 단일 칩으로 구현이 가능한 작은 크기의 위상고정루프를 제안하였다. 제안된 위상고정루프는 기존 구조에서는 안전한 동작이 불가능한 크기인 작은 용량을 가지는 커패시터를 사용하여 칩의 크기를 최소화 하였다. 시정수 비교기는 작은 시정수 값을 가지는 저항, 커패시터와 높은 시정수 값을 가지는 저항, 커패시터를 통과한 신호들을 입력으로 받아 루프필터 출력 전압의 변화를 감지한다. 시정수가 큰 노드의 출력은 루프필터 출력전압의 평균 값을 가지고, 시정수가 작은 노드의 출력은 루프필터 출력전압과 거의 같은 값을 가진다. 각 노드의 차이를 비교하여 나온 출력은 전류 보상기를 제어하여 작은 크기의 루프필터 커패시터를 충 방전 시킨다. 이는 제안된 위상고정루프를 안정하게 동작하도록 한다. 제안된 위상고정루프는 1.8V $0.18{\mu}m$ CMOS 공정을 사용하여 설계하였고, Hspice 시뮬레이션을 통해 회로의 동작을 검증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.1078-1080
• /
• 2002

High electronic equipments for dem-and improvement and efficiency are requested power quality of superior quality, the compensation system of power quality is processing actively, when voltage sag occurs, we propose to a series voltage compensator and control algorithm using of pid control in unbalanced 3-phase power system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.63-67
• /
• 2004

The problem is improving the positioning precision of a permanent magnet linear synchronous motor (PMLSM). Thus, this paper presents the design and realization of an adaptive dither to reduce the force ripple in PMLSM. A composite control structure is used, consisting of three components: a simple feed-forward component, a PID feedback component and an adaptive feed-forward compensator (AFC). Especially adaptive feed-forward component cancel out detent force using wavelet transformation. Computer simulation results verify the effectiveness of the proposed scheme for high precision motion trajectory tracking using the PMLSM

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.547-552
• /
• 1989

Single mode optical fiber interferometeric sensors using phase tracking homodyne detection are typically susceptible to environmentally induced temperature fluctuations and other types of disturbances. In this paper compensator is described, which is a simple and effective phase tracking feedback electronic circuit must be output signal stabilized to achieve maximln sensitivity and linearity of Mach-Zehnder fiber-optic interferomter in the presence of differential phase drift. The phase tracking range of the piezoelectric cylinder in the reference arm is .+-.3.7.pi.rad, and the probe mass about 1 gram in the sensing ann was used for measurements of the gravity acceleration.

• International Journal of Control, Automation, and Systems
• /
• 제3권1호
• /
• pp.56-69
• /
• 2005

In this paper, it is clearly shown that the two well-known necessary and sufficient conditions mp n as generic static output feedback pole-assignment and mp + d(m+p) n+d as generic minimum d-th order dynamic output feedback pole-assignment on complex field, unbelievably, do not match up each other in strictly proper linear systems. For the analysis, a diagram analysis is newly created (which is defined by the analysis of 'convoluted rectangular/dot diagrams' constructed via node-branch conversion of the signal flow graphs of output feedback gain loops). Under this diagram analysis, it is proved that the minimum d-th order dynamic output feedback compensator for pole-assignment in m-input, p-output, n-th order systems is quantitatively decomposed into static output feedback compensator and its associated d number of arbitrary 1st order dynamic elements in augmented (m+d)-input, (p+d)-output, (n+d)-th order systems. Total configuration of the mismatched data is presented in a Table.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1394-1397
• /
• 2002

High electronic equipments for demand improvement and efficiency are requested the power superior quality. The compensation system of power quality is processing actively. We propose to a series voltage compensator and control algorithm using pid control in unbalanced three- phase power system when voltage sag occurs.