• Bulletin of the Korean Chemical Society
• /
• v.34 no.4
• /
• pp.1108-1114
• /
• 2013

Photochemical reactions of fluoro- vs. nonfluoro-substituted polymethylenoxy chain linked phthalimide were carried out to explore how electronegative fluorine atoms inside the donor chain influence photocyclization reaction efficiencies and to briefly determine the alkali metal binding properties of the photoproducts. The results of this study show that the fluorine-substituted donor chain linked phthalimide undergoes inefficient photocyclization via single electron transfer (SET)-induced excited state pathways to generate 14-membered cyclic amidol compared to nonfluoro-analog due to low electron donor ability of the terminal oxygen donor site. These results show that photoinduced intramolecular SET processes arising from ${\alpha}$-silyl ether electron donors to phthalimides are largely dependent on the kinds of substituents inside donor chain. Finally, a preliminary study with the cyclic amidols generated in this effort showed that they have weak alkali metal cation binding properties regardless of absence/presence of fluoro-substituents.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.8
• /
• pp.664-668
• /
• 2011

In this study, we have fabricated the red OLED (organic light emitting diode). The basic device structure is ITO/hole transporting layer, TPD(500 $\AA$)/red emitting layer, Alq3 doped with DCM2:rubrene(20 $\AA$)/electron transporting layer, Alq3(M) (500 $\AA$-M $\AA$)/LiF(15 $\AA$)/Al(1,000 $\AA$). The thickness of electron transporting layer(500 $\AA$-M $\AA$) changed 0, 20, 40, 60 $\AA$. Turn on voltage of the red OLED was 5 V, 6 V, 6.5 V and 7.5 V, respectively with electron transfer layer changed ratio. Luminance of red OLED was 4,504, 1,840, 1,490 and 1,130 cd/$m^2$, respectively. Optimized electron transfer layer position changed ratio of the red OLED was 0 $\AA$.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.12
• /
• pp.1098-1103
• /
• 1994

Atomic force microscopy (AFM) images of two conducting layered transition-metal ditellurides, $TaTe_2$ and $Ta_{0.5}$$V_{0.5}$$Te_2$, were examined and their surface and bulk structural features were compared. All the measured unit cell parameters from AFM image were consistent and in complete agreement with the results of the X-ray diffraction. The microscopic structures of corrugated surface tellurium sheets were strongly affected by the modification of metal double zig-zag chains underneath Te surface. Large difference in the height amplitudes of AFM images in $TaTe_2$ and $Ta_{0.5}$$V_{0.5}$$Te_2$ phases was observed and this reflects large difference in the surface electron densities of two phases. On surface, the shorter intralayer Te…Te contacts in $TaTe_2$ induce more electron transfer from Te p-block bands to Ta d-block bands, thus electron density on surface observed in $TaTe_2$ is much lower than that of $Ta_{0.5}$$V_{0.5}$$Te_2$. However, in bulk, interlayer Te…Te contacts in V substituted phase are shorter than those in $TaTe_2$ phase, thus tellurium-to-metal electron transfer occurs more easily in $Ta_{0.5}$$V_{0.5}$$Te_2$ phase.

• Transactions of Materials Processing
• /
• v.33 no.2
• /
• pp.118-122
• /
• 2024

Micro-electromechanical systems (MEMS) based in-situ heating holders have been developed to enable high resolution imaging of heat treatment analysis. However, unlike the standard 3 mm metal disk specimens used in the furnace-based heating holder and general transmission electron microscopy holder, the MEMS-based in-situ heating holder requires thin specimens that can be penetrated by electrons to be transferred onto the MEMS chip. Previously, focused ion beam milling was used to transfer metal specimens, but it has the disadvantage of being expensive and the risk of specimen damage due to gallium ions. Therefore, in this study, we devised a method of transferring metallic materials by ultrasonic treatment using a transmission electron microscopy specimen made by electro jet polishing. A 3mm electropolished metal disk was placed in an appropriate solution, ultrasonicated, and then drop casted. The transfer of the specimen was successful, but it was confirmed that dislocations were formed inside the specimen due to ultrasonic treatment. This study provides a novel method for transferring metallic materials onto MEMS chips, which is cost-effective and less gallium ion damaging to the specimen. The results of this study can be used to improve the efficiency of heat treatment analysis using MEMS-based in-situ heating holders.

• Journal of Photoscience
• /
• v.7 no.1
• /
• pp.1-4
• /
• 2000

The photosensory ciliates Blepharisma japonicum and Stentor coeruleus use the hypericin-derived pigments blepharismin and stentorin, respectively, as photoreceptor chromophores. Fluorescence quenching studies have shown that the first excited singlet state of hypericin and the purified chromophores blepharismin and stentorin can be deactivated by electron transfer to an acceptor molecule with a suitable reducing potential [1,2]. This paper reports the result of a series of photobehavioral experiments performed with the aim to ascertain if the same electron accepters which quench the photoreceptor pigment fluorescence in vitro may also compete with the native acceptor molecule in its natural physiological environment. Individual cell trajectories were examined before and after light stimulation, in the presence and in the absence of potential "in vivo" electron accepters, with a microvideo-recording apparatus. Our data, on Blepharisma cells, showed that as the negative reduction potential of the electron acceptor increases, a pronounced decrease in cell photoresponsiveness was detected. A dramatic effect on cell photoresponsiveness was noticed in the presence of 1,4-benzoquinone that has the lowest negative reduction potential. Such an effect on the percentage of photoreacting cells was moderate in the case of 1,4-naphthoquinone, with a relatively higher negative reduction potential. In the presence of benzophenone, which has the highest negative reduction potential, no significant effect on photoreacting cells was noticed. Our results can support the hypothesis that in the pigment granules such a light-induced charge transfer from excited blepharismin to a suitable electron acceptor triggers sensory transduction processes in B. japonicum.

• Macromolecular Research
• /
• v.17 no.4
• /
• pp.240-244
• /
• 2009

High molecular weight(MW), 3-arm star poly(methyl methacrylate)(PMMA) with a narrow MW distribution($M_n$=570,000 g/mol, PDI=1.36) was successfully synthesized by activators regenerated by electron transfer(ARGET) atom transfer radical polymerization(ATRP). The polymerization was carried out with a trifunctional initiator/$CuBr_2$/N,N,N',N",N"-pentamethyldiethy lenetriamine(PMDETA) initiator/catalyst system in the presence of a tin(II) 2-ethylhexanoate [$Sn(EH)_2$] reducing agent at $90^{\circ}C$. The concentration of the copper catalyst was as low as 30 ppm, and a high initiation efficiency of the initiating sites was obtained. The chain-end functionality of the high MW, 3-arm star PMMA was confirmed by a chain extension experiment with styrene via ARGET ATRP, using the same catalyst system.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.2
• /
• pp.367-373
• /
• 2007

The present study investigates numerically nonequilibrium energy transfer between electrons and phonons in metal thin films irradiated by ultrashort pulse lasers and it also provides the temporal and spatial variations of electron and phonon temperatures using the well-established two-temperature model(TTM) on the basis of the Boltzmann transport equation(BTE). This article predicts the crater shapes in gold film structures, and compares the results by using two-dimensional energy transport equation. From the results, it is found that nonequilibrium energy transfer between electrons and phonons takes place, and the equilibrium time increases with the increase of laser fluence. On the other hand, above threshold fluence the ablation time doesn't change nearly with increasing fluences. Compared with one-dimensional TTM, it also reveals that the temporal distributions of electron and phonon temperatures at the top surface estimated by using two-dimensional TTM have a similar tendency. The results show that two-dimensional TTM can simulate the crater shape of metals during the irradiation of femtosecond pulse lasers and the absorbed energy is propagated to z-direction faster than to r-direction.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.05a
• /
• pp.63-64
• /
• 2006

본 연구에서는 광에너지를 화학적인 에너지로 변환할 때, 디바이스의 전하전달 매개를 위한 electron transfer mediator로서 널리 이용되는 Viologen이 자기조립화된 수정진동자률 전기화학법의 하나인 순환전압전류법(Cyclic Voltammetry)을 이용하여 산화 환원 반응 (redox reaction) 특성과 주사속도와 피크전류와의 상관관계를 분석하였다. 먼저 수정진동자를 친수 처리한 후, 메탄올 용액과 아세토니트릴 용액을 섞은 용매에 Viologen 분자를 자기조립 (self-assembly)하여, 전해질 용액의 농도 변화에 따른 산화 환원반응 특성과 피크전류의 값을 측정하였다 주사 속도를 2 배씩 증가하여 피크전류와의 상관관계를 조사한 결과, 선형적인 증가를 보였으며, 이를 통해 가역적인 반응(reversible reaction)이 일어났음을 확인할 수 있었다. 또한, 산화 환원 반응과 동시에 측정된 수정진동자의 공진 주파수(resonant frequency) 변화로부터 전하이동(charge transfer) 특성에 의해 반응에 참가한 이온의 질량을 알 수 있었다.

• Journal of Powder Materials
• /
• v.23 no.6
• /
• pp.458-465
• /
• 2016

A $TiO_2$/CNT nanohybrid photocatalyst is synthesized via sol-gel route, with titanium (IV) isopropoxide and multi-walled carbon nanotubes (MWCNTs) as the starting materials. The microstructures and phase constitution of the nanohybrid $TiO_2$/CNT (0.005wt%) samples after calcination at $450^{\circ}C$, $550^{\circ}C$ and $650^{\circ}C$ in air are compared with those of pure $TiO_2$ using field-emission scanning electron microscopy and X-ray diffraction, respectively. In addition, the photocatalytic activity of the nanohybrid is compared with that of pure $TiO_2$ with regard to the degradation of methyl orange under visible light irradiation. The $TiO_2$/CNT composite exhibits a fast grain growth and phase transformation during calcination. The nanocomposite shows enhanced photocatalytic activity under visible light irradiation in comparison to pure $TiO_2$ owing to not only better adsorption capability of CNT but also effective electron transfer between $TiO_2$ and CNTs. However, the high calcination temperature of $650^{\circ}C$, regardless of addition of CNT, causes a decrease in photocatalytic activity because of grain growth and phase transformation to rutile. These results such as fast phase transformation to rutile and effective electron transfer are related to carbon doping into $TiO_2$.

• Journal of the Korean Chemical Society
• /
• v.37 no.1
• /
• pp.83-91
• /
• 1993

The eletrochemical behavior of light lanthanide complexes has been investigated by several electrochemical techniques in alkaline solutions. The composition of the complexes was determined by spectrophotometric method to be 1 : 1 and reduction mechanism was two steps 1 electron transfer reaction. The half wave potential of first peak depended on pH and cathodic current showed remarkably adsorptive properties. The results of DC and CV investigation demonstrated the quise-reversible nature of the electron transfer. The anion radical formed after first one electron reduction process, dimerizes to form dimer. The apparent irreversible behavior of the second wave is a result of the existence of a fast protonation following the second electron transfer. An exhaustive electrolysis was carried out at controlled potential of -1.80 V, deep blue color of the solution became progressively weaker, and then the solution became colorless solution. The final product of an exhaustive electrolysis is electro-inactive. The appearance of four steps may be explained by the fact the reduction of Ln-OCP elucidated ECEC mechanism.