• Journal of the Korean Society of Radiology
• /
• v.15 no.1
• /
• pp.79-83
• /
• 2021

In radiation therapy, electron beam is often used in the treatment of superficial lesion. Accurate measurements are required because electron beam interacts with them in the beam path and affects dose measurements. However, no research has been conducted on electron beam quality assurance. in this study, PbO-based dosimeter was fabricated as a basic study for electron beam quality assurance. Thus, the reproducibility and linearity of the energy of 6, 9, and 12 MeV were analyzed to evaluate measurement accuracy and precision. Reproducibility measurements show RSD value of 1.024%, 1.019% and 0.890%, respectively, at 6, 9, and 12 MeV. linearity measurements show 0.9999 R2 at 6, 9, and 12 MeV altogether. Both evaluations show that the PbO dosimeter has very good measurement accuracy and precision with excellent results.

• Journal of Adhesion and Interface
• /
• v.20 no.2
• /
• pp.66-70
• /
• 2019

The surface of hydrophobic polypropylene (PP) fibers (spun-bonded fabric) was treated by an atmospheric plasma treatment method. These pre-treated hydrophilic PP fabrics were dip-coated in the aqueous poly(N-vinyl pyrrolidone) (PVP) solution. PVP layers on the surface of PP fiber were crosslinked by an irradiation of electron beam. The thickness of PVP hydrogels coated on the surface was easily controlled by changing the concentration of PVP in coating solution. The stepwise surface treatment, PVP coating, and hydrogel formation via electron beam irradiation were analyzed by the measurement of contact angle, scanning electron microscopy, and optical microscopy.

• Analytical Science and Technology
• /
• v.21 no.3
• /
• pp.201-211
• /
• 2008

The treatment efficiency of PCBs containing wastes has been investigated. The samples treated by electron beam and de-chlorination method were analyzed to verify the byproducts before treatment and after treatment. In the treated samples by electron beam irradiation, PCBs were not detected by comparing the peak matching using the Korean official waste test method. On the other hand, PCBs congeners were detected by analyzing individual isotope method using HRGC/HRMS. Most of PCB congeners in waste were decomposed to 3-chlorobiphenyls, lower chlorinated congener produced during the treatment of electron beam. In the chemical dechlorination treatment, it was found that the concentrations of PCBs in treated samples were lower than those of regulation criteria in Waste & POPs management law and the after treatment concentration were satisfied to the regulation criteria. Also, dioxins were not observed after the physio-chemical treatment processes of PCBs containing wastes.

• Carbon letters
• /
• v.16 no.2
• /
• pp.121-126
• /
• 2015

Carbon fibers are prepared by stabilizing pitch fibers accompanying electron beam (E-beam) irradiation. The carbon fibers pretreated by E-beam irradiation achieve a higher stabilization index than the carbon fibers that are only heat-stabilized. In addition, the carbon fibers subjected to E-beam irradiation in the stabilization step exhibit a comparable tensile strength to that of general purpose carbon fibers. The carbon fibers pretreated with an absorbed dose of 3000 kGy have a tensile strength of 0.54 GPa for a similar fiber diameter. Elemental, Fourier-transform infrared spectroscopy, and thermogravimetric analyses indicate that E-beam irradiation is an efficient oxidation and dehydrogenation treatment for pitch fibers by showing that the intensity of the aliphatic C-H stretching and aromatic $CH_2$ bending (out-of-plane) bands significantly decrease and carbonyl and carboxylic groups form.

• Journal of the Korean Society of Radiology
• /
• v.14 no.1
• /
• pp.1-6
• /
• 2020

In this study, it was intended to replace the existing plane parallel ionization chamber, which requires cross-calibration in electron beam treatment. The semiconductor compounds HgI₂ was fabricated as detector, and the characteristics of HgI₂ detector for the 6, 9 and 12 MeV electron beam was analyzed in the linear accelerator. It was also intended to evaluate the possibility of substitution with existing detectors and their applicability as electron beam dosimetry and to use them as a basic study of the development of electronic beam dosimeter. As a result of reproducibility, RSD was 0.4246%, 0.5054%, and 0.8640% at 6, 9, and 12 MeV energy, respectively, indicating that the output signal was stable. As a result of the linearity, the R² was 0.9999 at 6 MeV, 0.9996 at 9 MeV, and 0.9997 at 12 MeV showed that the output signal is proportional to HgI₂ as the dose is increased. The HgI₂ detector of this study is highly applicable to electron beam measurement, and it may be used as a basic research on electron beam detection.

• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.5
• /
• pp.724-730
• /
• 2006

A study on the electron beam(E-Beam) decompositions of volatile organic compounds(VOCs) under background gases(helium, nitrogen, oxygen, air) has been carried out. Hexane selected as aliphatic VOCs was irradiated with electron beam using a batch reactor in the dose range of $0{\sim}10kGy$ and at ambient temperature. The concentrations of Hexane were 140 ppmC, 300 ppmC and 600 ppmC, respectively. Irradiation treatment efficiency of Hexane was evaluated by the GC/FID, GC/MSD, and the by-products were analyzed by $CO/CO_2\;and\;O_3$ analyzers. In different concentration, the maximum degrees of Hexane decomposition at 10 kGy were 96.4%(140 ppmC), 88.3%(300 ppmC), and 49.9%(600 ppmC). It was found that the decomposition efficiency of Hexane was higher than that of toluene at the same conditions(140 ppmC). In addition, the formation of acetone, benzene, 2-hexanone, and 3-hexanone were observed after the treatment of Hexane.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.5
• /
• pp.1067-1070
• /
• 2009

We studied change in water contact angle on $TiO_2$ surfaces upon high-energy electron-beam treatment. Depending on conditions of e-beam exposures, surface OH-content could be increased or decreased. In contrast, water contact angle continuously decreased with increasing e-beam exposure and energy, i.e. change in the water contact angle cannot be rationalized in terms of the overall change in the surfacestructure of carbon-contaminated $TiO_2$. In the C 1s spectra, we found that the C-O and C=O contents gradually increased with increasing e-beam energy, suggesting that the change in the surface structure of carbon layers can be important for understanding of the wettability change. Our results imply that the degree of oxidation of carbon impurity layers on oxide surfaces should be considered, in order to fully understand the change in the oxide surface wettability.

• The Journal of Korean Society for Radiation Therapy
• /
• v.8 no.1
• /
• pp.29-35
• /
• 1996

We are often faced with the clinical situations that is inevitably extended SSD for electron beam therapy due to anatomical restriction or applicator structure. But there are some difficulties in accurately predicting output and properties. In electron beam treatment , unlike photon beam the decrease in output for extended SSD does not follow inverse-square law accurately because of a loss of side scatter equilibrium, which is particularly significant for small cone size and low energies. The purpose of our study is to analyze the output in changing with the energy, cone size, air gap beyond the standard SSD and to compare inverse-square law factor derived from calculated effective SSD, mominal SSD with measured output factor. In addition, we have analyzed the change of PDD for several cones with different SSDs which range from 100cm to 120cm with 5cm step and with different energies(6MeV, 9MeV, 12MeV, 16MeV, 20MeV). In accordance with our study, an extended SSD produces a significant change in beam output, negligible change in depth dose which range from 100cm to 120cm SSDs. In order to deliver the more accurate dose to the neoplastic tissue, first of all we recommend inverse-square law using the table of effective SSDs with cone sizes and energies respectively or simply to create a table of extended SSD air gap correction factor. The second we need to have an insight into some change of dose distribution including PPD, penumbra caused by extended SSD for electron beam therapy.

• Journal of the East Asian Society of Dietary Life
• /
• v.18 no.6
• /
• pp.1056-1062
• /
• 2008

To evaluate the effect of irradiation on restructured pork jerky containing paprika and Japanese apricot extracts, the quality of protein was determined in vitro based on the formation of trypsin indigestible substrate inhibitor (TIS) and the computed protein efficiency ratio (C-PER) as determined based on the protein digestibility and amino acid analysis. In addition, we compared the effects of electron beam irradiation to those of gamma irradiation. Approximately 3% of the moisture content of pork jerky was reduced in response to irradiation with 3kGy administered using an electron beam however, no additional reduction was observed in samples that were subjected to higher doses of irradiation. In addition, there were no notable differences in the crude protein and fat content of pork jerky samples that were subjected to irradiation, regardless of dose. Furthermore, the total amino acids profiles did not change in response to electron beam irradiation. However, the in vitro protein digestibility increased by 7% in response to 3kGy of electron beam irradiation and 5kGy of gamma irradiation, but no significant changes in digestibility were not observed in response to treatment with higher doses. TIS quantified as trypsin inhibitors were formed in response to irradiation using the electron beam (3kGy) and gamma rays (5kGy), although there was a slight reduction in the production of TIS inhibitors in samples irradiated with higher doses. Moreover, only samples irradiated with 10kGy (electron beam and gamma ray) showed higher TBA values than those of the control samples. Finally, the C-PERs $(2.50{\sim}2.60)$ were greater in all of the irradiated pork jerky samples than in the control samples (2.22). Taken together, these results suggest that electron beam irradiation and the incorporation of extracts (paprika and Japanese apricot) may be useful methods of improving the nutritional quality of pork jerky.

• Journal of Radiation Protection and Research
• /
• v.46 no.1
• /
• pp.8-13
• /
• 2021

Background: Salmonella enteritidis (SE) was the main cause of the pandemic of foodborne salmonellosis. The surface of eggs' shells can be contaminated with this bacterium; however, washing them with sodium hypochlorite solution not only reduces their flavor but also heavily impacts the environment. An alternative to this is surface sterilization using low-energy electron beam. It is known that irradiation with 1 kGy resulted in a significant 3.9 log reduction (reduction factor of 10,000) in detectable SE on the shell. FAO/IAEA/WHO indicates irradiation of any food commodity up to an overall average dose of 10 kGy presents no toxicological hazard. On the other hand, the Food and Drug Administration has deemed a dose of up to 3 kGy is allowable for eggs. However, the maximum dose permitted to be absorbed by an edible part (i.e., internal dose) is 0.1 Gy in Japan and 0.5 Gy in European Union. Materials and Methods: The electron beam (EB) depth dose distribution in the eggshell was calculated by the Monte Carlo method. The internal dose was also estimated by Monte Carlo simulation and experimentation. Results and Discussion: The EB depth dose distribution for the eggshells indicated that acceleration voltages between 80 and 200 kV were optimal for eggshell sterilization. It was also found that acceleration voltages between 80 and 150 kV were suitable for reducing the internal dose to ≤ 0.10 Gy. Conclusion: The optimum irradiative conditions for sterilizing only eggshells with an EB were between 80 and 150 kV.