• Corrosion Science and Technology
• /
• 제17권3호
• /
• pp.123-128
• /
• 2018

The fabrication of a controlled surface is of great interest because it can be applied to various engineering facilities due to the various properties of the surface, such as self-cleaning, anti-bio-fouling, anti-icing, anti-corrosion, and anti-sticking. Controlled surfaces with micro/nano structures were fabricated using an ion beam focused onto a polypropylene (PP) surface with a fluoridation process. We developed a facile method of fabricating hydrophobic surfaces through ion beam treatment with argon and oxygen ions. The fabrication of low surface energy materials can replace the current expensive and complex manufacturing process. The contact angles (CAs) of the sample surface were $106^{\circ}$ and $108^{\circ}$ degrees using argon and oxygen ions, respectively. X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FT-IR) spectroscopy were used to determine the chemical composition of the surface. The morphology change of the surfaces was observed by scanning electron microscopy (SEM). The change of the surface morphology using the ion beam was shown to be very effective and provide enhanced optical properties. It is therefore expected that the prepared surface with wear and corrosion resistance might have a considerable potential in large scale industrial applications.

• 천문학회보
• /
• 제41권2호
• /
• pp.68.1-68.1
• /
• 2016

The solar eclipse affects terrestrial environments in various aspects. For instance, it is well known that the electron concentration and current density decrease in the ionosphere due to the reduction of solar irradiation during solar eclipse. In this study, we carry out the statistical analysis of x, y, z, H-components, and the intensity of the geomagnetic field using the ground based geomagnetic data observed during the solar eclipses from 1991 to 2016. First, we confirm that characteristic decreases in the x and H-components can be seen in the vicinity of the maximum eclipse time at the observing site. Second, we find that the decrease in x and H-components is more conspicuous during the total solar eclipse rather than the partial or annular eclipses. We also find that such a dip is likely to be noticed when the observing site locates in the second half compared to the first half of the eclipse path, as well as when the eclipse occurs in dusk side than in dawn side. Third, we find that reductions in the ground geomagnetic field by the solar eclipse are more evident in the ascending phase of the solar cycle than in the descending phase. Finally, we briefly discuss implications of our findings.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.20-20
• /
• 2010

The effect of excimer laser annealing on the structural and dielectric behaviors of $PbZr_{0.52}Ti_{0.48}O_3$ (PZT) thin films has been investigated. The amorphous PZT thin films were prepared on Pt/Ti/$SiO_2$/Si substrates by a sol-gel method. The PZT precursor was prepared from lead acetate, zirconium acetylacetonate, and titanium isopropoxide. The starting materials were dissolved in n-propanol and 1,3-propanediol. After, the amorphous PZT thin films were laser-annealed (using KrF excimer laser) as a function of the laser energy density and the number of laser pulse. Structural properties of PZT thin films are characterized by using X-ray diffraction (XRD) and scanning electron microscopy (SEM). The dielectric characterization was done on a RT66A test system and a Agilent 4294A impedance analyzer. The PZT thin films show that excimer laser irradiation drastically improved the crystallization and dielectric properties of the PZT thin films, depending on the energy density and the pulse number.

• 한국환경과학회지
• /
• 제25권3호
• /
• pp.373-383
• /
• 2016

The aim of this study is to determine the exposure concentration of tetrabromobisphenol A(TBBPA) in southwestern coast and their photodecomposition rate. Also, it is to identify the radical species of the photodecomposition of TBBPA and their reactive byproducts using the electron spin resonance(ESR) method. TBBPA was not detected in any of the sea water samples from Mokpo, Gunsan, or Goheung. The sediment samples from Mokpo contained not detection(N.D)~50.0 ng/g dry wt., while those from Gunsan contained N.D~28.5 ng/g dry wt. and those from Goheung contained N.D~7.3 ng/g dry wt. The photodecomposition rates were $2.56{\times}10^{-6}/hr$ by visible light(400 nm), $7.98{\times}10^{-6}/hr$ by ultraviolet light(300 nm <), and $6.78{\times}10^{-6}/hr$ by sunlight. Also, we confirmed that singlet oxygen and hydroxyl radicals are the key reactive oxygen species at wavelengths greater than 400 and 300 nm, respectively. This study shows that the main byproducts formed during irradiation at wavelengths above 300 nm are 2,6-dibromobenzosemiquinone radical(2,6-$DBSQ{\cdot}^-$) and g-value 2.0048 doublet spectrum.

• Journal of Radiation Protection and Research
• /
• 제7권1호
• /
• pp.49-55
• /
• 1982

유기중합체의 열자극전류는 방사선량측정기로서 사용가능한 특성을 갖고있으며 중합체의 구성성분이 생체조직과 등가성분이므로 의학 및 생물학분야에서 효과적인 방사선 측정기구로 이용할 수 있었다. 포리에틸렌등 중합체에 방사선을 조사한후 $10{\sim}100V$의 전압과 실온에서 $100^{\circ}C$까지의 온도에 따라 열자극 전류를 측정하고 분석함으로서 물질의 에너지상수($0.8{\sim}1.0eV$)와 방사선피폭량(수Krands)에 따른 열자극전류($10^{-2}{\sim}10^{-4}{\mu}A$)의 상호관계를 계측할 수 있었다.

• Elastomers and Composites
• /
• 제51권3호
• /
• pp.240-249
• /
• 2016

$BiVO_4$ nanomaterial was synthesized from bismuth (III) nitrate pentahydrate [$Bi(NO_3)_3{\cdot}5H_2O$] and ammonium vanadate (V) [$NH_4VO_3$]. The $BiVO_4$-graphene nanocomposite was fabricated by calcining the $BiVO_4$ nanomaterial and graphene under an oxygen-free atmosphere at $700^{\circ}C$. X-ray diffraction (XRD) and scanning electron microscopy (SEM) were employed to characterize structural and morphological properties of samples. The catalytic activity of the $BiVO_4$-graphene nanocomposite was studied for the reduction of 4-nitrophenol, 3-nitrophenol and 2-nitrophenol by sodium borohydride [$NaBH_4$]. The photocatalytic activity of the $BiVO_4$-graphene nanocomposite was demonstrated by the degradation of organic dyes like BG, MB, MO and RhB under irradiation at 365 nm. The catalytic and photocatalytic activity were studied by UV-vis spectrophotometry.

• 공업화학
• /
• 제3권1호
• /
• pp.172-178
• /
• 1992

$F^{3+}(FeCl_3{\cdot}6H_2O)$을 광증감제로 하여 Chitosan 필름에 아크릴로니트릴 단량체를 수용액상에서 자외선 조사하여 그라프트 공중합시켰다. 그라프트 공중합체의 확인은 IR 스펙트럼과 전자 현미경으로 행하였다. 단량체의 농도, 광증감제의 농도, 중합반응시간, 중합반응온도 등 여러 중합반응의 파라미터를 조사하였다. 단량체의 농도와 광증감제의 농도가 증가할수록 퍼센트 그라프팅은 증가하였으며 중합반응시간과 중합반응온도가 증가하여도 퍼센트 그라프팅은 증가하였다.

• 한국세라믹학회지
• /
• 제48권6호
• /
• pp.571-576
• /
• 2011

Activity carbon (AC), Cu and $Cu_2O$ modified $TiO_2$ composites (Cu/$Cu_2O$-AC/$TiO_2$) were prepared using a sol-gel method. The characteristics of the composites were evaluated using Brunauer-Emmett-Teller (BET) surface area measurements, X-ray diffraction (XRD), energy dispersive X-ray (EDX) analysis and scanning electron microscope (SEM) analysis. A methyl orange (MO) solution under visible light irradiation was used to determine the photocatalytic activity. The degradation of MO was determined using UV/Vis spectrophotometry. $Cu_2O$, Cu and the cooperative effect of the AC increased the photo-absorption effect, thus increasing in photocatalytic activity.

• 한국세라믹학회지
• /
• 제45권3호
• /
• pp.150-156
• /
• 2008

Pitch-binded activated carbon fiber(ACF)/$TiO_2$ composite photocatalysts were prepared by Carbon Tetra Chloride (CTC) solvent mixing method with different mixing ratios of anatase to ACF. The result of the textural surface properties demonstrated that there is a slight increase in the Brunauer, Emmett and Teller (BET) surface area of composites with an increase of the amount of ACF. The surfaces structure morphologies of the composites were observed using an Scanning Electron Microscope (SEM). In the XRD patterns for all ACF/$TiO_2$ composites, the diffraction peaks showed the formation of anatase crystallites. The EDX spectra showed the presence of C, O and Si with strong Ti peaks. Most of these samples were richer in carbon and major Ti metal than any other elements. From the photo-decomposition results, the excellent activity of the ACF/$TiO_2$ composites between c/$c_0$ for methylene blue and UV irradiation time could be attributed to both the effects of the photocatalysis of the supported $TiO_2$ and adsorptivity of activated carbon fiber and another carbon derived from pitch.

• 한국세라믹학회지
• /
• 제46권6호
• /
• pp.621-626
• /
• 2009

Fe-AC/Ti$O_2$ photocatalysts were prepared by a sol-gel method. The photocatalytic properties of Fe-AC/Ti$O_2$ photocatalysts for the purification of water have been investigated. The samples were characterized by scanning electron microscopy (SEM), specific surface area (BET), X-ray diffraction analysis (XRD), and energy dispersive X-ray spectroscopy (EDX). The photocatalytic activities were evaluated by the photocatalytic oxidation of methylene blue (MB) solution. It was found that the prepared Fe-AC/Ti$O_2$ composites have an excellent photocatalytic under visible light irradiation. A small amount of Fe ions in the AC/Ti$O_2$ composites could obviously enhance their photocatalytic activity. The high activities of the Fe-AC/Ti$O_2$ composites could be attributed to the results of the synergetic effects of the enhancement of the Fe element, the photocatalytic activity of Ti$O_2$, and the adsorption of AC.