• Journal of Radiation Industry
• /
• v.6 no.1
• /
• pp.55-59
• /
• 2012

Polyacrylonitrile (PAN)-based carbon fibers have been widely used due to their unique chemical, electrical, and mechanical properties. Electron beam irradiation has been extensively employed as means of altering properties of polymeric materials. Electron beam irradiation can induce chemical reactions in materials without any catalyst. Electron beam irradiation may be useful in accelerating the thermal compression stabilization of PAN nanofibers. To investigate the irradiation effect on PAN fibers, PAN nanofibers were irradiated by electron beam at 1,000~5,000 kGy. Irradiated and non-irradiated PAN nanofibers were heated at 180 and $220^{\circ}C$ without applying pressure for 15 min. Then 1 metric ton has been applied for 5 min. SEM images have been found that the fiber kept its morphological behavior after the hot pressing up to electron beam irradiated 1,000 kGy. DSC thermograms showed that the peak temperatures of the exothermic reactions were found to decrease with increasing electron beam irradiation doses and temperature. FT-IR spectra have been found to decrease $C{\equiv}N$ stretch band with increasing the electron beam irradiation dose. These results indicate that the modification of PAN via reactions such as cyclization is significantly enhanced by electron beam irradiation and thermal compression technique.

• Bulletin of the Korean Space Science Society
• /
• 2006.10a
• /
• pp.52-52
• /
• 2006

Many spacecraft failures and anomalies have been attributed to energetic electrons in the Earth's magnetosphere. While the dynamics of these electrons have been studied extensively for several decades, the fundamental question of how they are accelerated is not fully resolved. Proposed theories have not been successful in explaining fast high energy increase such as REE (Relativistic electron enhancement). In this presentation, we show observations of energetic electron precipitation measured by the Korean satellite, STSAT-1 which simultaneously detect (100ev - 20 keV) and (170 - 360 keV) energy electrons at the 680 km orbit, when the RES event observed at the geosynchronous orbit on October 13, 2004. STSAT-1 observed intense electron precipitation in both energy ranges occurred in the midnight sector clearly demonstrating that electrons having wide energy band are injected from the plasma sheet. To make the balance between loss and injection, the injected electron flux should be also large. In this situation, the injected electrons can be trapped into the magnetosphere and produce REE, though they have low e-folding energies. We propose this plasma sheet injection might be the primary source of relativistic electron (1 MeV) flux increases.

• Journal of Radiation Industry
• /
• v.6 no.2
• /
• pp.125-128
• /
• 2012

Kenaf (Hibiscuc cannabinus L.) is a renewable resource for industry and kenaf lignin is syringyl-guaiacyl lignin. The electron beam irradiated on kenaf core various doses range from 200 to 1,000 kGy to improve delignification. The yield of lignin, which is 2.53 g from 10 g of electron beam irradiated kenaf core. A comparison extracted lignin between from native kenaf core and electron beam irradiated kenaf core was then studied through chemical structure and bonding property by a Fourier transform infrared spectroscopy (FT-IR). Thermal stability of the extracted-purified lignin was performed via differential scanning calorimetry (DSC). These results were explained that electron beam irradiation increased performance of extracting efficiency.

• Journal of Welding and Joining
• /
• v.15 no.3
• /
• pp.79-87
• /
• 1997

This study was performed to evaluate basic characteristics of electron beam welding process for a 9% Ni steel plate. The principal welding process parameters, such as working distance, accelerating voltage, beam current and welding speed were investigated. The AB (Arata Beam) test method was also applied to characterize beam size and energy density of the electron beam welding process. The electron beam size was found to decrease with the increase of accelerating voltage and the decrease of working distance. So, in case of high voltage (150kV), spot size and energy density of electron beam were revealed to be 0.9mm and $6.5\times10^5W/\textrm{cm}^2$ respectively. The accelerating voltage among the welding parameters was found to be the most important factor governing the penetration depth. When the accelerating voltage of electron beam was low ($\leq$90kV), beam current and welding speed did not affect on the penetration depth significantly. However, in case of high voltage ($\geq$120kV), the depth of penetration increased very sensitively with the increase of beam current and the decrease of welding speed.

• Progress in Medical Physics
• /
• v.15 no.1
• /
• pp.39-44
• /
• 2004

The energy distributions for clinically used electron beams from measured and calculated mono energetic depth dose values were calculated. The energy distributions having the minimum difference between the measured and reduced values of depth dose are determined by iterations based on least square method. The nominal energies of 6, 9, 12, 15 MeV clinical electron beams were examined. The Monte Carlo depth dose calculations with determined energy distributions were peformed to evaluate those distributions. In a comparison of the calculated and measured depth dose data, the standard errors are estimated within $\pm$ 3% from surface to R$_{80}$ depth and within $\pm$4% from the surface to near the range for all electron beams. This can be practically applied to determine the energy distributions for clinically used electron beams.

• Journal of Radiation Industry
• /
• v.5 no.2
• /
• pp.107-112
• /
• 2011

Electron beam-induced crosslinking of polycaprolactone (PCL) films containing various crosslinking agents (CAs) was investigated in this study. PCL films containing various CAs prepared by a solution casting method were irradiated by electron beams at various absorption doses and the irradiated PCL films were investigated in terms of their crosslinking degree, thermal and mechanical properties, and biodegradability. Based on the results of the crosslinking degree measurement, triallyl isocyanurate was found to be most effective for the electron-beam induced crosslinking of PCL films. The results of the UTM, DMA, and TMA revealed that the thermal and mechanical properties of the crosslinked PCL films were greatly improved in comparison to those of the pure PCL. The results of the enzymatic degradation test revealed that the biodegradability of the crosslinked PCL films was reduced in comparison to that of the pure PCL.

• Journal of Radiation Industry
• /
• v.7 no.1
• /
• pp.23-28
• /
• 2013

In this study, we fabricated high density polyethylene (HDPE) composites filled with antioxidants and UV stabilizers. The electron beam irradiation on the fabricated composites was carried out over a range of absorbed doses from 50 to 200 kGy to confirm the changes of discoloration. The changes of discoloration were characterized using a color difference meter and FT-IR for confirming the changes of the color difference and structural change. It was observed that the color difference of IRGANOX 1010-, IRGAFOS 168-, and TINUVIN 328- added HDPE was higher than that of the control HDPE by electron beam irradiation. The melting temperature of UV stabilizer-added HDPE was not significantly changed by electron beam irradiation. However, the melting temperature of phenol-containing antioxidant-added HDPE was increased with increasing the absorbed dose. And the melting temperature of phosphorus-containing antioxidant-added composite was decreased with increasing the absorbed dose.

• Journal of Radiation Industry
• /
• v.17 no.1
• /
• pp.75-82
• /
• 2023

This research was carried out to evaluate on microbiological (total aerobic bacteria, yeast and mold) and physicochemical (color, firmness, water content, water activity and weight loss) characteristics of 10MeV electron-beam irradiated(0, 0.5, 1, 2 and 3kGy) enoki mushroom during storage (0, 7, 14, 21 and 28 day) at 4℃ with 80% relative humidity. As compared to control, all irradiated samples exhibited dose-dependent decreases of microbial counts up to 28 days, and electron beam irradiation above 2 kGy kept below the microbiological safety threshold. Yellowness (b^*) which is associated with discoloration of mushrooms was significantly reduced by electron beam irradiation (2 kGy). Firmness, water content, water activity and weight loss showed no significant difference in all group up to 28 days. Thus, the appropriate electron-beam irradiation dose was confirmed as 2 kGy to inhibit the microbial growth and browning reaction in enoki mushroom.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.39 no.5
• /
• pp.516-518
• /
• 1990

We have derived the equation which involves the variation of electron energy with time in a lowly ionized plasma when a low alternating electric field is applied. We consider only elastic collisions between electrons and neutral atoms. This equation is solved using the 4th-order Runge-Kutta method, and applied to argon gas discharge which is driven by source frequency of 100, 1K, 10K, 100K, and 1M (Hz). The results show that the variation of electron energy becomes flat with higher frequencies.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2005.10a
• /
• pp.328-329
• /
• 2005