• Proceedings of the Korean Nuclear Society Conference
• /
• 2005.10a
• /
• pp.773-774
• /
• 2005

• Journal of the Korean Society of Radiology
• /
• v.11 no.4
• /
• pp.183-188
• /
• 2017

In recent years, the automatic remote control controller of the gamma ray irradiator malfunctions, and radiation workers are continuously exposed to radiation exposure accidents. In the non-destructive testing field, much time and resources are invested in establishing a radioactive source monitoring system in order to prevent potential incidents of radiation. In this study, the gamma-ray response properties of the lead monoxide-based radiation detector were estimated through monte carlo simulation as a previous study for the development of a radioactive source location monitoring system that can be applied universally to various non-destructive testing equipment. As a result of the study, the optimized thickness of the radiation detector varies according to the gamma-ray energy emitted from the radioactive source, and the optimized thickness gradually increases with increasing energy. In conclusion, the optimized thickness of the lead monoxide-based radiation detector was $200{\mu}m$ for the Ir-192, $150{\mu}m$ for the Se-75 and $300{\mu}m$ for the Co-60. Based on these results, the appropriate thickness of lead monoxide-based radiation detector considering secondary-electron equilibrium was evaluated to be $300{\mu}m$ for general application. These results can be used as a basic data for determining the appropriate thickness required in the radiation detector when developing a radiation source location monitoring system for universal application to various non-destructive testing equipment in the future.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.6
• /
• pp.496-500
• /
• 2003

Molecular self-assembled of surfactant viologen are of recent interest because they can from functional electrodes as well as micellar assemblies, which can be profitably utilized for display devices, photoelectrochemical studies and electrocatalysis as electron acceptor or electron mediator. Fromherz et al studied the self-assembly of thiol and disulfide derivatives of viologens bearing long n-alkyl chains on Au electrode surface[1]. The electrochemical behavior of self-assembled viologen monolayer has been investigated with QCM, which has been known as nano-gram order mass detector. The self-assembly process of viologen was monitored using resonant frequency(ΔF) and resonant resistance(R). The redox process of viologen was observed with resonant frequency(ΔF).

• Nuclear Engineering and Technology
• /
• v.31 no.5
• /
• pp.445-454
• /
• 1999

This work describes the adaptation of extractive scintillation by URAE $X^{TM}$ with a photon-electron rejecting alpha liquid scintillation (PERAL $S^{)}$ spectrometer to the analysis of uranium in aqueous samples. The extraction efficiency of the system was evaluated under varing chemical conditions including pH, and sample-cocktail volume ratio. Isotopic information from the (PERAL $S^{)}$ spectrum of natural uranium was obtained using a curve fitting routine. Comparisons of the result with that obtained from alpha spectrometry method using ion implanted silicon detector showed good agreement.t.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.04b
• /
• pp.141-144
• /
• 2004

Molecular self-assembled of surfactant viologens are recently interesting because they can be from functional electrodes as well as micelle assemblies which can be profitably utilized for display devices, electrochemical studies and electrocatalysis as electron acceptor or electron mediator. The electrochemical behavior of self-assembled viologen monolayer on Au electrode surface has been investigated with QCM which has been known as nano-gram order mass detector. A monolayer of viologen is immobilized on the gold electrode surface and the normal potentials corresponding to the to the successive one-electron transfer processes of the viologen actives are two peaks in 0.1mol/l phosphate buffer solution respectively. These result suggest that the viologen SAMs are stable and well-behaved monolayers.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.137-137
• /
• 2000

The surface collective modes of thin K films deposited on Al(111) have been investigated using frequency dependent photoyield measurements and momentum resolved inelastic electron scattering. Jellium based theoretical calculations have predicted a richer set of features in the thin films than for the surface of a semi-infinite solid because there are th interference between two interfaces (substrate-film and film-vacuum) and heavy damping on the substrate. The use of an optical probe and electron scattering has allowed us to draw a more complete picture of the dynamic screening in thin films. The number, dispersion, damping and optical activity of the collective modes of the thin films have been measured as a function of K film thickness. New overlayer-induced excitations are observed : At qII=0, they correspond to the antisymmetric slab mode and the multipole surface plasmon. At finite qII=0, these modes undergo a transition towards the K multipole and monopole surface plasmons. With increasing coverage, the overlayer excitations turn into the collective modes of semi-infinite K. For a consistent interpretation of photoyield and electron energy loss spectra it is crucial to account for the non-analytic dispersion of the overlayer modes at small parallel wave vectors and for the finite angular resolution of the detector. The observed dispersions confirm predictions based on the time-dependent density functional approach.

• Journal of the Korean Chemical Society
• /
• v.29 no.5
• /
• pp.503-509
• /
• 1985

Sixteen organochlorine pesticides extracted out from the crops and cleaned by solvent-solvent partitioning and Florisil column chromatography were determined by gas-liquid chromatography. The majority of the pesticides were well separated by being eluted through 5% QF-1 column and some of them through 3% OV-17 column and 2.596 DC-200/2.5% QF-1 column, and the eluted pesticides were detected by $^{63}Ni$ electron capture detector. The linear calibration curves were obtained for the most of pesticides while some curves were slightly deviated from the linearity. In the determination of 16 pesticides added to thirteen kinds of crops, the recoveries were showed over 85% for the most cases and the relative standard deviations of 5 analyses were less than 12.1%. The results were within the criteria of the AOAC method.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.8
• /
• pp.42-47
• /
• 2000

Long-wavelength infrared (LWIR) detectors made of self-assembled quantum dots embedded in the channel region of high electron mobility transistor (HEMT) is demonstrated. Above 180 K, the detector shows low dark currents due to strong confinement effect of electrons in InAs quantum dots and exhibits the broad spectral response ranging from 7 mm to 11 mm. The peak detectivity ($D^*$) of $1.93{\times}10^{10}cmHz^{1/2}/W$ is obtained at 9.4 mm. The photocurrent characteristics as a function of applied bias are similar to that of normal FETs, while the photocurrent decreases as the applied electric field exceeds $2{\times}10^3V/cm$ because of the increased dark current.

• Journal of the Korean Society of Radiology
• /
• v.14 no.5
• /
• pp.517-522
• /
• 2020

Electron beam have many factors that affect dose distribution, so even if identical settings are used, they should be identified and used for radiation treatment, and the effects on the structures in the body are sensitive, making it difficult to investigate uniform dose distribution on tumors. In this study, a dosimeter was produced using PbI₂ which is a photoelectric material, and electrical characteristics were analyzed for 6, 9, and 12 MeV electronics in linear accelerators. The reproducibility test results showed that RSD were 1.1215%, 1.0160%, and 0.05137% respectively at 6, 9, and 12 MeV energies, indicating that the output signals were stable. The linearity evaluation results showed that the R² values of the reliability indicator for straight line trend lines were 0.9999, 0.9999, and 0.9994, respectively, at 6, 9, and 12 MeV, to confirm that the output signal was proportional to PbI₂ as dose increased. The PbI₂ dosimeter in this study is judged to be highly applicable to electromagnet measurement and is thought to be able to be used as a basic study of electron detector through photoelectric material.

• Applied Microscopy
• /
• v.34 no.1
• /
• pp.13-21
• /
• 2004

The high voltage electron microscope (HVEM) newly installed in KBSI is an advanced transmission electron microscope capable of atomic resolution (${\leq}1.2{\AA}$ point-to-point resolution) together with high titling function (${\pm}60^{\circ}$), which are suitable to do 3-dimensional atomic imaging of a specimen. In addition, the instrument can be controlled by remote operation system, named as 'FasTEM' for the HVEM, which is favorable to overcome some environmental obstacles resulting from the direct operation. The FasTEM remote operation system has been established between the headquarter of KBSI in Daejeon and the Seoul branch. The server system in the headquarter has been connected with a portable client console system in the Seoul branch using an advanced internet resource, 'KOREN' of 155 Mbps grade. Most of the HVEM functions essential to do remote operation are available on the portable client console. The experiment to acquire the high resolution image of [001] Au has been achieved by excellent transmission of control signals and communication with the HVEM. Real-time reaction like direct operation, such as controls of the illumination and projection parameters, acquisition and adjustment of each detector signal, and electrical steering of each motor-driven system has been realized in remote site. It is positively anticipated that the first remote operation of HVEM in conjunction with IT infraengineering plays a important role in constructing the network based e-Science Grid in Korea for national user s facilities.