• Journal of the Korean Applied Science and Technology
• /
• v.14 no.1
• /
• pp.95-102
• /
• 1997

The synthetic method of pyrazole was performed by 1,3-dipolar cycloaddition with dipolarophile instead of the reaction between diazomethane and acetylene. The cycloaddition mechanism and reactivity of 3-phenyloxadiazole derivatives with dipolarophiles was investigated. In order to investigate the mechanism and reactivity of this cycloaddition, the effect of substituents having various kinds of electron withdrawing or releasing groups were examinated. Considering the effect of substituents, an electron withdrawing group attached at the 4-carbon position in 3-phenyloxadiazole derivatives decrease the reaction rate because of the lack of electron density in oxadiazole ring. The reaction rate of 3-phenyloxadiazole derivatives with dipolarophiles were more conveniently measured using UV than using a volumetric analysis which was used before. From the result of this study, it was that the cycloaddition was found to be a first-order reaction depending upon the concentration of 3-phenyloxadiazole only.

• The Korean Journal of Food And Nutrition
• /
• v.12 no.5
• /
• pp.478-483
• /
• 1999

This study was conducted to investigate functional properties of 70% acetone extract in different parts of two potato varieties. 'Superior' and 'Atlantic' potato were processed by following method. Potatoes are washed, peeled, sliced and steamed before hot air drying for flesh and peel powder. Hunter's L and b values of flesh powder from blanched 'Superior' potato were higher than flesh powder from fresh 'Superior' potato. Discoloration of 'Superior' potato was inhibited by steam blanching. Contents of total polyphenol and chlorogenic acid in the 70% acetone extract of 'Superior' potato were higher than those of 'Atlantic' potato paticularly in the blanched flesh and peel. But flavonoid was not detected in flesh extract. The phenolic concentration was not decreased by the heat treatment. The nitritescavenging and electron donating ability was greatest at the tuber peel including the skin and cortex tissue 1mm beneath the skin. From the above results browning reaction and polyphenol contents in different parts of potato slices were dependent on cutivars. Peels contained more polyphenols than those from the flesh. The results indicate that potato peel extract of steam blanched plus hot air dried potato tuber showed the effectiveness as a natural nitrite scavenger and antioxidant.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.6
• /
• pp.1349-1352
• /
• 2009

We report the results of the surface chemistry of deuterized ethanol exposed Zircaloy-4 (Zry-4) surfaces with various amount of $C_2D_5$OD exposures at 190 K. This system was examined with Auger electron spectroscopy (AES) and temperature programmed desorption (TPD) techniques. In TPD study, $D_2$ was evolved at two different desorption temperature regions accompanying with broad desorption background. The lower temperature feature at around 520 K showed first-order desorption kinetics. The high temperature desorption peak at around 650 K shifted to lower desorption temperature as the exposure of $C_2D_5$OD increased. The Zr(MNV) Auger peak shifted about 2.5 eV from 147 eV to lower electron energy followed by 300 L of $C_2D_5$OD dosing. This implies metallic zirconium was oxidized by deuterized ethanol adsorption. After stepwise annealing of the oxidized Zry-4 sample up to 843 K, the shifted Zr(MNV) peak was gradually shifted back to metallic zirconium peak position. After the sample was heated to 843 K, the oxygen content near the Zry-4 surface was recovered to clean surface level. The concentration of carbon, however, was not recovered by annealing the sample.

• Journal of the Korean Vacuum Society
• /
• v.7 no.s1
• /
• pp.160-166
• /
• 1998

The field emission characteristics of defective diamond films grown by microwave plasma enhanced chemical vapor deposition (MPECVD) have been studied. X-ray diffraction, the poor crystal quality and/or small grain sizes of the diamond phase and the inclusion of the non-diamond carbon phases in these films have been condirmed by raman spectroscopy, scanning electron microscopy, atomic force microscopy, and the reflectance measurements. The degrees of the film defectiveness and the emission characteristics were dependent on the methane concentration. Current-versus-voltage measurements have demonstrated that the defective diamond films have good electron emission characteristics. characteristics strongly suggests the defect-related electron-emission mechanism. The defective diamond films deposited on Si substrates show the field emission current density of 1$\mu\textrm{A}/\textrm{cm}^2$ and 1mA/$\textrm{cm}^2$ have been measured at electric fields as low as 4.5V/$\mu\textrm{m}$ and 7.6V/$\mu\textrm{m}$, respectively. We also observed the similar emission characteristics from the defective diamond film deposited on Cr/Si substrate and could decrease the deposition temperature to $600^{\circ}C$.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.33 no.5
• /
• pp.455-463
• /
• 2007

The present study was designed to evaluate effects of the commonly used NSAIDs(acetaminophen, aspirin, and ibuprofen) on human periodontal ligament cells. Human periodontal ligament cells were grown from a cell line provided by Kyungpook National University. Effects of NSAIDs on the proliferation of human periodontal ligament cells were assessed using MTT assays. And then $PGE_2$ concentrations were determined by ELISA and the changes of cellular configuration were found by electron micrograph. The results were as follows; 1. The MTT assay demonstrated that the commonly used NSAIDs(acetaminophen, aspirin, and ibuprofen) had not significant cytotoxic effect on human periodontal ligament cells. 2. NSAIDs inhibited the $PGE_2$ synthesis of human periodontal ligament cells compared with the control group. These inhibitory effects had no significant differences with NSAID type and concentration. 3. Electron micrographs of human periodontal ligament cells treated with NSAIDs showed more narrow and irregular shape.

• Journal of the Korean Ceramic Society
• /
• v.40 no.11
• /
• pp.1102-1105
• /
• 2003

The fiber drawing process induced defects in silica fiber have been investigated. This study has focused on the Oxygen Deficient Centers (ODCs) and E' centers induced by the fiberization process in low-OH silica fibers. To investigate those defects induced by the fiberization process, the optical absorption spectrum and Electron Spin Resonance (ESR) have both been employed. The concentration of Oxygen Deficient Centers (ODCs) and E' centers are increased by the fiber drawing process. The population of defects in the neck-down region has also been investigated. The most significant generation of defects during fiber drawing process has been shown to occur in this region of silica preform. The population of defects is higher on the edge region than in the center of neck-down region.

• Journal of Radiation Industry
• /
• v.3 no.1
• /
• pp.1-5
• /
• 2009

The variation of MgO surfaces, in which fluorine was contained (F-MgO), by high energy electron-beam (EB) was studied using X-ray photoelectron spectroscopy (XPS). Fluorine on the MgO surface was eliminated by EB treatment with the consequence that the electronic structures of Mg, O and C were varied. Moreover, as a result of oxidation of carbon species on the surface by high dose EB treatment (90 kGy), the concentration of carbonate and carboxyl species on the surface was increased. In this experiment, it was confirmed that the structure of oxidized metal surface can be adjusted by varying conditions of EB treatment (energy and dose). This result implies that EB can be applied for developing new catalysts.

• Korean Journal of Metals and Materials
• /
• v.50 no.7
• /
• pp.523-530
• /
• 2012

We investigated the experimental method that uses the homogeneous precipitation method to prepare mica flakes-coated rutile-type titania pearlescent pigment with urea as a precipitant. $TiO_2$ particles exhibit a high reflection of lights and optical properties with chemical stabilities, so they are appropriate for coating on luminescent pigments (mica). The coating principle of mi ca coated titania with various thicknesses was analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and tested by spectrophotometer. Mica with a particle size in the range of $40-60{\mu}m$ was suspended in water, and metal sulphates and urea were added to the mixture, which was heated to boiling. The change in pH was continuously followed. The metal oxide and crystal structure were affected by the conditions of $TiOSO_4$ concentration and reaction time with a sintering temperature the range of $800-1100^{\circ}C$.

• Korean Journal of Metals and Materials
• /
• v.50 no.7
• /
• pp.539-544
• /
• 2012

Thermal shock behavior of TiN-coated SUS 304 substrate was investigated using a laser ablation method. By short surface ablation with a pulse Nd-YAG laser, considerable surface crack and spalling were observed, whereas there were few oxidation phenomena, such as grain growth of TiN crystallites, nucleation and growth of $TiO_2$ crystallites, which were observed from the coatings quenched from $700^{\circ}C$ in a chamber. The oxygen concentration of the ablated coating surface with the pulse laser also had a lower value than that of the quenched coating surface by Auger electron spectroscopy and electron probe micro analysis. These results were attributed to the fact that the properties of the pulse laser method have a very short heating time and so the diffusion time for oxidation was insufficient. Consequently, it was verified that the laser thermal shock test provides a way to evaluate the influence of the thermal shock load reduced oxidation effect.

• Journal of Surface Science and Engineering
• /
• v.54 no.6
• /
• pp.348-356
• /
• 2021

In this study, optical diagnosis of plasma was performed for nitrogen doping in graphene using a horizontal inductively coupled plasma (ICP) system. Graphene was prepared by mechanical exfoliation and the ICP system using nitrogen gas was ignited for plasma-induced and defect-suppressed nitrogen doping. In order to derive the optimum condition for the doping, plasma power, working pressure, and treatment time were changed. Optical emission spectroscopy (OES) was used as plasma diagnosis method. The Boltzmann plot method was adopted to estimate the electron excitation temperature using obtained OES spectra. Ar ion peaks were interpreted as a reference peak. As a result, the change in the concentration of nitrogen active species and electron excitation temperature depending on process parameters were confirmed. Doping characteristics of graphene were quantitatively evaluated by comparison of intensity ratio of graphite (G)-band to 2-D band, peak position, and shape of G-band in Raman profiles. X-ray photoelectron spectroscopy also revealed the nitrogen doping in graphene.