• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1294-1296
• /
• 2005

We have fabricated white organic light emitting diodes. To obtain balanced white emission and improve the efficiency of devices, thin electron blocking layer (TEBL) was inserted between the emitting layers. We showed that the effective injection of electrons through the optimization of TEBL (a - NPD) embodied the balance of spectra and had a possibility of getting white emission. In a device with 0.3 nm a-NPD, it had a maximum power efficiency of 3.80 lm/w at 250 $cd/m^2$, a luminance of 1200 $cd/m^2$ at 100 $mA/cm^2$ , and the CIE coordinates were (0.353, 0.357).

• Bulletin of the Korean Chemical Society
• /
• 제16권9호
• /
• pp.886-891
• /
• 1995

Electroactive monolayers based on zirconium(Ⅳ) phosphonate film were prepared on gold and tin oxide electrodes by sequential layer-by-layer depostion technique. High transfer coefficient values and surface coverages of surface bound redox molecules were obtained from the electrochemical measurements of heterogeneous electron transfer rates for monolayer modified electrodes. 1,10-Decanediylbis(phosphonic acid) (DBPA) monolayer as insulating barrier was effective in blocking electron transfer. However, these film modified oxide electrode shows voltammetric behavior of diffusion/permeation process taking place at very small exposed area of modified electrode through channels due to structural defects within film when a very fast redox couple such as Ru(NH3)63+ is hired.

• 청정기술
• /
• 제29권4호
• /
• pp.244-248
• /
• 2023

최근 많은 정보를 신속하게 전달하기위한 방법으로 디스플레이의 역할은 아주 중요하며 다양한 색을 자연색에 가깝게 재현하기 위한 연구가 진행 중이다. 특히 정확하고 풍부한 색을 표현하기 위한 방법으로 발광 구조에 대한 연구가 진행되고 있다. 기술의 고도화, 디바이스의 소형화로 인해 작지만 높은 시인성과 에너지 소모에서 높은 효율을 가진 디스플레이의 필요성이 지속적으로 증가되고 있는 실정이다. OLED의 효율을 향상시키기 위해서는 운반자 주입의 향상, 전자와 정공이 수적인 균형을 이루며 효율적으로 재결합 할 수 있는 소자의 구조, 발광 효율이 큰 물질의 개발 등 OLED의 효율을 향상시키고자 하는 노력은 다방면에서 진행되고 있다. 본 연구에서는 7층 적층구조 배면발광 청색 OLED 소자의 전기적 특성 및 광학적 특성을 분석하였다. 소자는 제작이 용이하며, 고효율 및 고휘도화가 가능한 Blue 발광물질인 4,4'-Bis(carbazol-9-yl)biphenyl : Ir(difppy)2(pic)를 사용하였다. OLED 소자 제작은 SUNICEL PLUS 200 시스템을 이용하여 5×10-8 Torr 이하의 고진공 상태에서 In-Situ 방식으로 증착하였다. Electron or Hole Injection Layer(EIL or HIL) Electron or Hole Transport Layer(ETL or HTL) 등이 추가된 5층 구조에 Electron or Hole Blocking Layer(EBL or HBL)을 추가한 7층 구조로 실험을 진행하였다. 제작한 소자의 전기적, 광학적 특성을 분석한 결과 EBL 층과 HBL층을 삽입하여 색의 확산을 방지한 소자는 색 순도가 우수하게 나타났다. 본 연구결과를 이용하여 청색 OLED 디스플레이 소자의 연구 개발 기초 및 실용화에 크게 기여할 것으로 기대된다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1381-1382
• /
• 2005

We report improved efficiency in blue electrophosphorescent organic light emitting diodes by introducing an interfacial exciton blocking layer between light emitting layer (EML) and hole transport layer (HTL). Iridium(III) bis [(4,6-di-fluorophenyl)- pyridinato -N,C2']picolinate (FIrpic) was used as blue phosphorescent dopant and JHK6-3 with carbazole and electron transporting group as host and also as the interfacial layer, resulting in drastic increase in quantum efficiency.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.1018-1021
• /
• 2003

We have synthesized poly(3-hexylthiophene) and studied the optical properties of P3HT for applying to the red emitting materials of organic electroluminescent device. Usually, an organic EL device is composed of single layer like anode/emitting layer/cathode, but additional layer such as hole transport, electron transport and buffer layer is deposited to improve device efficiency. In this study, Multilayer EL devices were fabricated using tris(8-hydroxyquinolinate) aluminum($Alq_3$) as electron transport material, (N,N'-diphenyl-N,,N'(3-methylphenyl)-1,1'-biphenyl-4,4'diamine))(TPD) as hole transport/electron blocking materials and LiF as buffer layer. That is, a device structure of ITO/blending layer(TPD+P3HT)/$Alq_3$/LiF/Al was employed. In the Multilayer device, the luminance of $10{\mu}W/cm^2$ obtained at 10V. And, we present the experimental evidence of the enhancement of the Foster energy transfer interaction in emitting layer.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.549-552
• /
• 2008

We have developed a novel bipolar host material with both electron and hole transporting characteristics. Since CGH(Cheil Green Host) has some electron transporting characteristics, it shows increased luminance efficiency in device including TCTA and without HBL(hole blocking layer:BAlq). Maximum power efficency of CGH was 27.4lm/W at the device structure ITO/DNTPD(60)/NPB(20)/TCTA(10)/EML(30)/Alq3(20)/LIF(1)/Al. We measured device performance again without HBL. The result of CGH showing 26.0lm/W is outstanding compared to that of CBP showing 19.1lm/W without holeblocking layer. We also measured lifetime and found to be 205hr at 3000nit, that is significant result compared to the life time of CBP device showing 82hr. CGH shows high device performance with holeblocking layer. Moreover, it shows better device performance and life time than those of CBP without holeblocking.

• Transactions on Electrical and Electronic Materials
• /
• 제12권4호
• /
• pp.148-151
• /
• 2011

We designed and fabricated aluminium gallium nitride (AlGaN)/GaN high electron mobility transistors (HEMTs) with stable reverse blocking characteristics established by employing a selective fluoride plasma treatment on the drainside gate edge region where the electric field is concentrated. Implanted fluoride ions caused a depolarization in the AlGaN layer and introduced an extra depletion region. The overall contour of the depletion region was expanded along the drift region. The expanded depletion region distributed the field more uniformly and reduced the field intensity peak. Through this field modulation, the leakage current was reduced to 9.3 nA and the breakdown voltage ($V_{BR}$) improved from 900 V to 1,400 V.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.305-306
• /
• 2009

In this study, we have invastigated the recombination zone in the blue phosphorescent organic light-emitting devices with various partially doped structures. The basic device structure of the blue PHOLED was anode / hole injection layer (HIL) / hole transport layer (HTL) / emittingvastigated the recombination zone in the blue layer (EML) / hole blocking layer (HBL) / electron transport layer (ETL) / electron injection layer (EIL) / cathode. After the preparation of the blue PHOLED, the current density (J) - voltage (V) - luminance (L) and current efficiency characteristics were measured.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.956-960
• /
• 2006

Deep-blue organic light-emitting diodes (OLEDs) with/without ultra-thin LiF layer inserted at the interface between hole-blocking and electron-transporting layers have been fabricated and investigated. The fundamental structures of the OLEDs are ITO/m-MTDATA/NPB/BCP/LiF (with/ without)/ $Alq_3/LiF/Al.Deep$ blue light emission with CIE coordinate of (0.15, 0.11) has been achieved for all devices. Further, by inserting LiF with thickness of 1nm at the interface between BCP and $Alq_3$ layer, the luminous efficiency as well as the power efficiency is much improved compared to that without. The enhancement of electron injection due to insertion of LiF may account for this improvement.

• 대한전자공학회논문지
• /
• 제25권4호
• /
• pp.422-429
• /
• 1988

The photoconductive multilayer of Se-As(hole blocking layer)/Se-As-Te (photoconductive layer) /Se-As (layer for supporiting hole transport)/Se-As(layer or controlling total capacitance)/Sb2S3(electron blocking layer) was fabricated and its electrical and optical properties were investigated. The photoconductive multilayer is made of evaporated a-Se as the base material, doped with As and Te to prevent the crystallization of a-Se and to enhance red sensitivity, respectively. The multilayer with good image reproducibility has the following deposition condition. The first layer has the thickness of 250\ulcornerat the deposition rate of 250\ulcornersec. The second layer has the thickness of 800\ulcornerat the deposition rate of 250\ulcornersec. The third layer has the thickness of 125\ulcornerat the deposition rate of 250\ulcornersec. The fourth layer has the thickness of 1700\ulcornerunder the Ar gas ambient of 50x10**-3torr. The image pick-up tube, employing this multilayer demonstrates the following characteristics. The photosensitivity is 0.8, the resolution limit is above 300TV line, and the decay lag is about 7%. And spectral response convers the whole visible range. Therfore the application to color TV camera is expected.