영남대학병원 치료방사선과에 설치되어 있는 NELAC-1018의 작은 치료 면적에 대한 전자선출력 특성을 측정하여 다음과 같은 결과를 얻었다. 1. $6{\times}6cm$ applicator에서는 콜리메타가 $6{\times}6cm$일때 0.60에서 콜리메타 완전 열림일때 1.39을 나타내었으며, $20{\times}20cm$ applicator에서는 콜리메타 $20{\times}20cm$ 에서 0.89를, 콜리메타 완전 열림일때는 1.15을 나타내어 작은 면적에서는 콜리메타의 열림 정도에 따른 출력특성이 크게 변하였다. 2. 작은 면적에 대한 출력특성은 6MeV에서 $10{\times}10cm$을 기준으로 하여 $2{\times}3cm$ 일때 0.618, $6{\times}6cm$일때 0.826을 나타내었으며, 15MeV에서 $2{\times}3cm$일때 0.887, $6{\times}6cm$ 0.982을 나타내어 에너지가 클수록 치료 면적의 크기에 따른 출력변화가 적음을 나타내었다. 위와 같은 측정결과는 작은 치료면적을 갖는 전자선 치료의 임상적이용에 있어서 콜리메타의 열림 정도의 결정과 에너지 선택이 매우 중요함을 시사하고 있다.
유기재료(organic material)는 위성이나 우주비행체의 열을 조절하고 우주환경에 직접 노출되는 것을 차단하기 위하여 가장 흔하게 사용되는 재료 중 하나이다. 본 논문에서는 지상설비를 이용하여 모사한 우주환경에서 유기재료의 물성변화를 관찰하였다. 대표적인 위성용 유기 열조절 재료 중 하나인 2mil ITO(Indium Tin Oxide) coated aluminized KAPTON을 실험 대상으로 선택하였다. 양성자에 의한 단일 우주환경효과를 실험하기 위하여, 한국 원자력의학원의 MC-50 싸이클로트론(cyclotron)을 이용하여 양성자를 조사(irradiation)하였으며, 조사조건은 지구궤도 주변 최고의 양성자 발생기록인 1972년 8월의 최고치 상황을 적용하였다. 조사에너지는 평균 관측에너지인 30MeV으로 고정하였으며, 등가 조사량은 우주노출 시간 1년, 3년, 5년 및 10년을 기준으로 설정하였다. 분석과정은 인장강도를 측정하여 정량적 물성저하를 확인하였고, 전계방출 전자주사현미경 등으로 결정성변화와 노출표면의 손상을 분석하였다.
Effects of double packaging (combinational use of aerobic and vacuum conditions) and antioxidants on physicochemical properties in irradiated restructured chicken rolls were determined. Chicken breast treated with antioxidants (none, sesamol+a-tocopherol) was used to process restructured chicken breast rolls. The sliced rolls were vacuum, aerobic, or double packaged (vacuum for 7 d then aerobic for 3 d) and electron beam irradiated at 2.5 kGy. Color, 2-thiobarbituric acid reactive substances (TBARS), oxidation reduction potentials (ORP), and volatile profiles of the samples were determined at 0 and 10 d. Irradiation made restructured chicken rolls redder (p<0.05), and the increased redness was more distinct in irradiated vacuum-packaged than irradiated aerobic or double packaged meats. TBARS values of antioxidant-treated double packaged rolls were lower than even nonirradiated vacuum-packaged meat, and those were distinct at 10 d (p<0.05). ORP and lipid oxidation values were lower in irradiated vacuum and double packaged samples than those in irradiated aerobic packaged ones at 0 d (p<0.05). Irradiation of restructured chicken rolls increased the amount of total volatiles. Considerable amounts of off-odor volatiles were reduced or not detected by double packaging and antioxidant treatment at 10 d. Therefore, the combined use of antioxidants and double packaging would be useful to reduce redness and control the oxidative quality changes of irradiated restructured chicken rolls
This study was aimed at observing the influence of laser irradiation on a $ZrO_2-8%Y_2O_3$ ceramic coating layer fabricated by plasma spraying. The $ZrO_2-8%Y_2O_3$ ceramic powder was plasma sprayed onto SS400 carbon steel substrate and laser irradiated on the coating layer under various conditions of laser power and beam diameters. As to the as-sprayed specimen and laser-treated specimen, a hardness test and a microstructure analysis were performed. Hardness was measured by a microhardness tester; microstructure was observed by an optical microscope and a scanning electron microscope. The result was that the microstructure of the laser-irradiated coating layer was dense; porosities almost disappeared and hardness increased. It was also observed that microcracks occured in the laser-irradiated coating layer.
방사선처리기술은 현재 멸균, 폴리머가교, 식품조사, 생고무가황 등 산업적으로 많은 곳에서 이용되고 있다. 현재 감마선과 전자선을 이용한 것은 방사선처리기술의 대표적인 기술이다. 이 논문의 목적은 최근의 방사선 기술을 이해하기 위해 외국의 방사선기술 동향을 살펴보고 산업현장 작업자가 방사선 관련 기술이 친숙해지기를 목적으로 그들에게 유용한 정보를 제공하기 위함이다. 본 조사를 통해 방사선이용기술이 지속적으로 성장함을 알 수 있었고, 또한 이 기술을 이용하면 제품의 다양성을 줄 수 있다는 사실도 알아냈다.
목적 : 광자선과 블록을 얻는 트레이와의 상호작용에 의해 생성된 2차 전자는 피하층에 과도 한 선량증가의 원인이 된다. 이런 전자오염으로 인한 표면선량을 감소시키기 위해 트레이 아래 전자필터를 부착하는 것이 유용하다. 대상 및 방법 :두께가 다른 Cu판, Al판 그리고 Cu/Al 복합판을 사용하여 전자오염에 의한 표면선량을 감소시키는 효과를 측정하였다. 최적의 필터를 찾기 위해서 $10m\times10cm$ 조사야와 SSD 78.5cm의 기하학적 모형으로 표면에서부터 최대선량 지점까지 2mm 간격으로 흡수선량을 측정하였다. 최적필터의 조사야 의존성을 구하기 위해서 $4cm\times4cm$에서부터 $25cm\times25cm$까지 조사면적을 변화시켜가며 흡수선량을 측정하였다 결과 : 표면선량은 조사면적을 증가시키면 서서히 증가하였고 $15cm\times15cm$ 조사면적 이상에 서는 표면선량이 급속히 증가하였다. Al판을 사용했을 경우 표면선량이 최대선량 지점의 선량보다 낮게 유지되지 않으므로 Al판은 전자필터로는 부적합하였으며 0.5mm Cu판과 Cu/Al=0.28mm/1.5mm 복합판이 최적 전자필터로 결정되었다. 두가지 최적필터의 경우 $4cm\times4cm$ 조사면에서는 표면선량을 $5.5\%$(tray 사용할때 표면선량에서 filter 사용할때 표면선량을 뺀 것) 낮출 수 있었고 $10cm\times10cm$에서는 $11.3\%,\;25cm\times25cm$에서는 $21.3\%$로 낮출 수 있었다. 결론 : 전자오염에 기인한 표면선량은 조사면적에 의존하였고 트레이를 설치했을때 표면의 전자오염은 많았고 특히 조사면적이 클 때 표면의 전자오염은 더욱 증가하였다 표면 및 build-up영역의 선량 특성을 측정한 결과 0.5mm Cu판과 Cu/Al=0.28mm/1.5mm 복합판이 최적 필터로 결정되었다. 트레이 밑에 최적 필터를 부착하면 표면선량을 유효하게 감소시킬 수 있었고 필터의 효과는 조사면적이 클 때 더욱 좋았다.
PVA 농도, $AgNO_3$ 농도, IPA의 농도, 그리고 전자빔의 조사량 등의 다양한 조건에서 PVA 매트릭스에서 은입자를 생성하기 위하여 전자 빔을 이용하였다. PVA 농도, $AgNO_3$ 농도, 그리고 IPA의 농도가 증가하고 전자빔의 조사량이 증가함에 따라서 생성된 은입자의 분포도가 증가함을 알 수 있었다. 그리고 $AgNO_3$ 농도, IPA의 농도, 그리고 전자빔의 조사량은 은입자의 생성에 중요한 변수가 됨을 확인하였다. 이러한 결과들을 XRD, UV, 그리고 TEM 등으로 확인하였다. XRD로부터 생성된 입자가 은임을 확인하였다. 생성된 은입자의 분포 및 크기 등을 연구하기 위하여 UV와 TEM을 사용하였다.
An experimental investigation of the physical properties of light curing composite resin P-50 was performed, in which an argon ion laser beam was irradiated. The physical and mechanical properties of laser polymerized composite resin were determined by measuring the compressive strength, diametral tensile strength, curing depth and microhardness depending upon the experimental conditions such as the laser irradiation time(10sec, 20sec, 30sec) and laser power(300mW, 500mW, 1000mW). These observations were compared with a conventional visible light curing technique. In addition, to evaluate the marginal adaptation, Class V cavity was prepared on the buccal or lingual surface of the extracted premolar and filled with P-50 light curing resin. The test samples were irradiated with both light sources so that the interface between the restoration and the tooth structure were observed under scanning electron microscope. The most of physical and mechanical properties of the laser cured resin showed a remarkable improvement than those treated with the conventional light source, while the observations with the scanning electron microscope provided no significant difference for two polymerized sources. From the results in the experiment it appears that the potential of an argon ion laser is of important value of the use in the polymerization of composite resin.
반응표면분석법을 이용하여 적양배추 종자의 전자선 처리조건과 재배조건에 따른 새싹채소의 이화학적 및 관능적 품질특성을 분석하여 유통에 적합한 최적조건을 모색하였다. 수분함량의 경우 회귀식의 $R^2$가 0.9638이었고 조사선량 및 재배기간에 많은 영향을 받고 있었다. Total phenolics 함량은 회귀식의 $R^2$가 0.9117이었고 조사선량에 많은 영향을 받았으며, carotenoid 함량($R^2$=0.8338)의 경우 조사선량, 재배기간, 저장기간의 순으로 조건 변수의 영향력이 작용하였다. 관능적 품질 역시 전자선 조사선량에 가장 크게 영향을 받아 선량의 증가에 따라 관능평점이 감소하는 경향을 보여주었다. 재배 및 저장조건의 최적화를 위해 total phenolics 함량 및 전반적 기호도를 superimposing한 결과 최적조건은 조사선량 2.2-3.8 kGy, 재배기간 3.0-4.0일 및 저장기간 2.0-3.0일 범위로 예측되었다.
BiSrCaCuO thin films were fabricated by atomic layer-by-layer deposition using an ion beam sputtering method. 10 wt% and 90 wt% ozone mixed with oxygen were used with ultraviolet light irradiation to assist oxidation. At early stages of the atomic layer by layer deposition, two dimensional epitaxial growth which covers the substrate surface would be suppressed by the stress and strain caused by the lattice misfit, then three dimensional growth takes place. Since Cu element is the most difficult to oxidize, only Sr and Bi react with each other predominantly, and forms a buffer layer on the substrate in an amorphous-like structure, which is changed to $SrBi_2O_4$ by in-situ anneal.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.