• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.150-150
• /
• 2012

진공증착을 이용하여 제조된 알루미늄 박막은 증착 조건에 따라 그 특성이 현저히 달라지는 것으로 알려져 있다. 특히, 진공도와 증착율에 따라 비저항과 반사율, 표면 색상 등이 크게 달라지며 이에 따라 적절한 증발원 및 증착 방법의 선택이 박막의 특성을 좌우하게 된다. 알루미늄은 융점이 낮은 반면 증기화되는 온도가 높을 뿐만 아니라 고온에서는 대부분의 내화물 금속과 반응하기 때문에 저항가열 증발원을 이용하여 증발시키기가 매우 까다로운 물질중의 하나이다. 또한 전자빔으로 증발시킬 경우에는 열전도도가 커서 수냉 도가니를 통해 열이 빠져나가기 때문에 효과적인 증발을 위해서는 고전력을 투입해야 하는 어려움이 있다. 한편, 스퍼터링 증발원을 이용하여 알루미늄을 증착하면 낮은 증착율로 인해 반사율과 같은 제반 특성이 현저히 떨어지는 단점이 있다. 본 논문에서는 알루미늄 박막의 제조를 위한 최적의 증발원과 증착 방법을 소개하고 증착 조건과 박막 특성의 상관성 자료를 소개하였다. 이를 위해 각종 저항가열 및 전자빔 증발원 그리고 스퍼터링을 이용한 증발 실험 결과를 소개하고 증발원에 따른 알루미늄 박막의 특성 변화 그리고 제반 증착 조건이 박막의 특성에 미치는 영향을 소개하였다.

• Journal of the Korean Society for Heat Treatment
• /
• v.12 no.3
• /
• pp.199-205
• /
• 1999

The quaternary Ti-Al-V-N films have been grown on glass substrates by reactive dc and rf magnetron sputter deposition from a Ti-6Al-4V target in mixed Ar-$N_2$ discharges. The Ti-Al-V-N films were investigated by means of X-ray diffraction(XRD), electron probe microanalysis(EPMA) and scratch tester. Both XRD and EPMA results indicated that the Ti-Al-V-N films were of single B1 NaCl phase having columnar structure with the (111) preferred orientation. Scratch tester results showed that the adhesion strength of Ti-Al-V-N films which treated with substrate heating and vacuum annealing was superior to that of as-deposited film. The good adhesion strength was also achieved in the double-layer structure of Ti-Al-V-N/Ti-Al-V/Glass.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.11a
• /
• pp.127-128
• /
• 2012

ZnO nanostructures were grown by the hydrothermal method on ZnO seed layers post-heated in the range $350-500^{\circ}C$. The effects of the post-heated ZnO seed layers on the structural and optical properties of the ZnO nanostructures were investigated by scanning electron microscopy (SEM), X-ray diffraction (XRD) spectroscopy, and photoluminescence (PL) spectroscopy. The average grain sizes in the ZnO seed layers increased with increasing post-heating temperature, and nano-fibrous structures were observed on the surface of the ZnO seed layers post-heated at $450^{\circ}C$. The ZnO seed layers post-heated in the range $350-500^{\circ}C$ affected the residual stress, lattice distortion in the ZnO nanostructures and the intensity, positions, and full widths at half maximum of the 2-theta and PL peaks in the XRD and PL spectra for the ZnO nanostructures.

• Korean Journal of Food Science and Technology
• /
• v.14 no.1
• /
• pp.30-35
• /
• 1982

Ultrastructural changes in endomysial connective tissue, sarcolemma, transverse ridges and myofibrillar structures with particular attention given to Z-discs. A and I-filaments induced by heating to $80^{\circ}C$ were observed by transmission and scanning electron microscopy. Muscle heated to $80^{\circ}C$ produced granulation of sarcolemma aid ultrastructural changes and coagulation were observed in endomysial and sarcolemmal connective tissue. The edvient changes in myofibrillar structure were an increase in coagulation compactness of the A-band portion of sarcomere and disintegration of the I-bands. Z-discs appeared to be relative resistant to heat but I-filaments were observed to be most heat labile.

• Elastomers and Composites
• /
• v.51 no.4
• /
• pp.286-300
• /
• 2016

$MoS_2$ precursors were synthesized by reacting thioacetamide ($C_2H_5NS$) with sodium molybdate dihydrate ($Na_2MoO_4{\cdot}2H_2O$) in aqueous HCl solution. $MoS_2$ nanoparticles were prepared from dried $MoS_2$ precursors by calcination in an electric furnace at $700^{\circ}C$ for 2 h under an inert argon atmosphere. $MoS_2-C_{60}$ nanocomposites were obtained by heating $MoS_2$ nanoparticles and fullerene ($C_{60}$) together in an electric furnace at $700^{\circ}C$ for 2 h. Their morphological and the structural properties were characterized by powder X-ray diffraction and scanning electron microscopy. The $MoS_2$ nanoparticles and $MoS_2-C_{60}$ nanocomposites were used as catalysts in the reductions of 2-, 3-, and 4-nitrophenol in the presence of sodium borohydride. The photocatalytic activities of the $MoS_2$ nanoparticles and $MoS_2-C_{60}$ nanocomposites were evaluated in the degradation of organic dyes (brilliant green, methylene blue, methyl orange, and rhodamine B) under ultraviolet light (254 nm).

• Journal of Powder Materials
• /
• v.19 no.3
• /
• pp.204-209
• /
• 2012

In this work, powder metallurgy and severe plastic deformation by high-pressure torsion (HPT) approaches were combined to achieve both full density and grain refinement at the same time. Pure Cu powders were mixed with 5 and 10 vol% diamonds and consolidated into disc-shaped samples at room temperature by HPT at 1.25 GPa and 1 turn, resulting in ultrafine grained metallic matrices embedded with diamonds. Neither heating nor additional sintering was required with the HPT process so that in situ consolidation was successfully achieved at ambient temperature. Significantly refined grain structures of Cu metallic matrices with increasing diamond volume fractions were observed by electron backscatter diffraction (EBSD), which enhanced the microhardness of the Cu-diamond composites.

• Journal of Astronomy and Space Sciences
• /
• v.34 no.4
• /
• pp.251-256
• /
• 2017

The electric coupling between the lithosphere and the ionosphere is examined. The electric field is considered as a timevarying irregular vertical Coulomb field presumably produced on the Earth's surface before an earthquake within its epicentral zone by some micro-processes in the lithosphere. It is shown that the Fourier component of this electric field with a frequency of 500 Hz and a horizontal scale-size of 100 km produces in the nighttime ionosphere of high and middle latitudes a transverse electric field with a magnitude of ~20 mV/m if the peak value of the amplitude of this Fourier component is just 30 V/m. The time-varying vertical Coulomb field with a frequency of 500 Hz penetrates from the ground into the ionosphere by a factor of ${\sim}7{\times}10^5$ more efficient than a time independent vertical electrostatic field of the same scale size. The transverse electric field with amplitude of 20 mV/m will cause perturbations in the nighttime F region electron density through heating the F region plasma resulting in a reduction of the downward plasma flux from the protonosphere and an excitation of acoustic gravity waves.

• Journal of the Korean Chemical Society
• /
• v.20 no.5
• /
• pp.417-423
• /
• 1976

Corona treatment of PE, PP and PVC showed a dramatic increase of bond strength when lap joints were made between the polymers and aluminum plates. Heating the corona-treated PE and PP, and PVC in a drying oven at 80 and $50^{\circ}C$, respectively, for 15 min reduced the bond strength to about a half of that of corona-treated but unheated polymers, which indicated that the increase of bond strength was not due to oxidation of the polymer surface. The Weibull distribution function was employed to check reliability of the scattered data obtained from testing the lap joints. It is speculated that electron was deposited on the corona-treated polymer surface to enhance bond strength with aluminum.

• Journal of Technologic Dentistry
• /
• v.33 no.1
• /
• pp.15-23
• /
• 2011

Purpose: Thy yttria tetragonal zirconia polycrystalline(Y-TZP) is a good structural ceramic for dental restoration. But it have a problem that delamination of veneering ceramic from the Y-TZP core materials. The problem generally occur at the interface, thus this study was conducted to evaluate the interface of Y-TZP using scanning electron microscopy(SEM). Methods: To investigate this aspect, high-resolution SEM observations were made of polished and etched (HF content gel) cross-sections of the interface area. Dry and moist veneering porcelain powders were built up on the zirconia base. Results: The extent of this surface faceting is dependent upon the moisture content of the porcelain powder and the firing temperature. More moisture and higher final heating temperature accelerates the observed faceting of the Y-TZP grains at the interface to the veneering ceramic. Conclusion: These changes of the Y-TZP grains indicate that destabilization of the tetragonal phase of zirconia occurs at the interface during veneering with ceramic. It may result in a reduction of the stability of the zirconia and interface.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.395-396
• /
• 2008

Copper-Phthalocyanine (Cu-Pc) thin films of 100nm thickness have been deposited on silicon substrates as the different heating temperatures by thermal evaporation deposition technique. X-ray patterns showed with different temperature conditions at the $2\theta$ range of 5-$55^{\circ}$. The surface roughness of Cu-Pc thin films was investigated by using an atomic force microscope (AFM). A scanning electron microscope (SEM) has been used to characterize the micro-structures and morphologies depended on the substrate temperatures.