• Korean Chemical Engineering Research
• /
• v.44 no.2
• /
• pp.193-199
• /
• 2006

The catalytic oxidation of toluene over $-Al_2O_3$ supported copper-manganese oxide catalysts in the temperature range of $160-280^{\circ}C$ was investigated by employing a fixed bed flow reactor. The catalysts were characterized by BET, scanning electron microscopy (SEM), temperature-programmed reduction(TPR), temperature-programmed oxidation(TPO), X-ray photoelectron spectroscopy (XPS) and X-ray diffraction(XRD) techniques. Catalytic oxidation of toluene was achieved at the below $280^{\circ}C$, and the optimal content of copper and manganese in the catalyst was found to be 15.0 wt％Cu-10.0 wt％Mn. From the TPR/TPO and XPS results, the redox peak of 15 Cu-10 Mn catalyst shifted to the lower temperature, and the binding energy was shifted to the higher binding energy. Furthermore, It is considered that $Cu_{1.5}Mn_{1.5}O_4$ is superior to Mn oxides and CuO in the role as active factor of catalysts from the XRD results and also catalytic activities are dependent on the redox ability and high oxidation state of catalysts.

• Journal of Wetlands Research
• /
• v.11 no.1
• /
• pp.15-27
• /
• 2009

To reveal conservation value of Sowhangbyungsan-neup among wetlands in Mt. Odae designated as a Ramsar convention site in 2008, ecological characteristics were investigated. The maximum depth of sediment was 86cm and average at central part was 56cm. Average pH of water was 5.8 and this indicates that this wetland has the characteristics between bog and fen. Average electron conductivity was $11{\mu}S$/cm, which is the lowest among Korean wetlands. Nutrient status was oligotrophic based on contents of cation, nitrate, ammonia, soluble reactive phosphorus in water. Out-flow of water was related with the 3 day cumulative precipitation. Soil texture was loam and nutrient level was very low. Vascular plants of 45 family, 95 genus, 121 species, 2 subspecies, 16 variety, 4 forma, total 121 taxa were recorded. Main plant communities on Sphagnum base were Osmunda cinnamomea community, Carex dispalata community and Carex curta community. The results indicated that this wetland has very different ecological characteristics than others in Korea and deserves conservation value well. Also, this study revealed that there is no evident threatening factor and this wetland will have characteristics of fen continuously in near future.

• Korean Journal of Food Science and Technology
• /
• v.41 no.4
• /
• pp.369-373
• /
• 2009

${\alpha}$-Waxy corn starch was used as a feed for twin-screw extrusion in order to enhance starch liquefaction with added thermostable ${\alpha}$-amylase (derived from Bacillus licheniformis). The residence time distribution and starch liquefaction were investigated. The starch liquefaction was analyzed in terms of reducing sugar contents, molecular size from gel permeation chromatography (GPC), and microstructure from scanning electron microscopy (SEM). The use of ${\alpha}$-starch contributed to the production of more reducing sugar than the use of raw starch use alone. From GPC, the effect of ${\alpha}$- starch on the molecular size reduction was shown to be small. From SEM, irregular and damaged surface were observed on the extrudate from ${\alpha}$-starch, as compared to those from raw starch. The spread of residence time distribution curves was greater with feed of ${\alpha}$-starch than raw starch, indicating that ${\alpha}$-starch was hard to flow forward during extrusion. This could be improved by increasing the feed moisture content and barrel temperature of extruder.

• Journal of Life Science
• /
• v.10 no.1
• /
• pp.22-36
• /
• 2000

The mammary gland contains a subpopulation of epithelial cells with large proliferative potentials which are the likely targets for carcinogens. These clonogenic cells can proliferate and differentiate into functional glandular structures. Multicellular secretory alveolar units (AU) develop from these clonogens in grafts of monodispersed rat mammary epithelial cells (RMEC) in gland-free mammary fat pads in intact recipient F344 rats co-grafted with mammotropic hormone-secreting pituitary tumors (MtT F4). Multicellular nonsecretory ductal units (DU) develop in grafts of monodispersed RMEC in gland-free fat pads in adrenalectomized recipient WF rats co-grafted with MtT W10. However, this effect were reversed by hydrocortisone replacement therapy. RMEC were isolated from appropriate donor rats as monodispersed mixed cells or, alternatively, RNA＋ cells were sorted by flow cytometry of mixed RMEC stained with FITC-RNA and PE-anti-Thy-1.1 monoclonal antibody. We grafted mixed or sorted PNA+ cells in gland-free mammary fat pads in recipient rats that were endocrinologically manipulated to induce AU or DU. Cells were also isolated from these AU or DU as mixed or sorted RNA＋ cells and sub-transplanted in recipient rats treated appropriately to induce AU or DU, respectively. Cells obtained from AU in grafts gave rise to clonal AU and from DU in grafts to DU on sub-transplantation in appropriate recipients. When adrenalectomized recipient WF rats co-grafted with MtT W10 received daily subcutaneous injections of hydrocortisone for periods of 21 days following the PHA＋ cell transplantation, AU, instead of DU, were developed. The histologies of these secondary AU and DU were not different from those of the primary AU and DU. Casein and laminin proteins were demonstrated by immunocytochemical staining of primary and secondary AU. Electron micrographs also demonstrated that AU were composed of secretory cells with milk protein in the cytoplasm. DU were composed of little or non-secretory ductal epithelial cells. These AU and DU also secreted large amounts of lipids. Clonogenic cells were more common in DU than in AU. Thus, AU and DU contain persistent subpopulations of clonogenic stem-like cells.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.3
• /
• pp.501-508
• /
• 1987

Experimental studies of particle (TiO$\_$2/) deposition from the laminar hot gas particle flow (about 1565K) onto the cold wall surface (about 1215K-1530K) were carried out by the 'real time' laser light reflectivity method (LLRM) and the photographs of scanning electron microscope(SEM). The LLRM was used for the measurement of thermophoretic deposition rates of small particles (d$\_$p/<3.mu.m), and the photographs of SEM were used for determining what factors control the collection of particles having diameters ranging from 0.2 to 30 microns. Two phenomena are primarily responsible for transport of the particles across the laminar boundary layers and deposition: (1) particle thermophoresis (i.e. particles migration down a temperature gradient), and (2) particle inertial impaction, the former effect being especially larger factor of the particle deposition in its size over the range of 0.2 to 1 microns. And also, this study indicates that thermophoresis can be important for particles as large as 15 microns. Beyond d$\_$p/=16.mu.m, this effect diminishes and the inertial impaction is taken into account as a dominant mechanism of particle deposition. The results of present experiments found to be in close agreement with existing theories.

• Korean Journal of Materials Research
• /
• v.12 no.5
• /
• pp.414-422
• /
• 2002

Three different multi-component white cast irons alloyed with Cr, V, Mo and W were prepared in order to study their as-cast and solidification structures. Three combinations of the alloying elements were selected so as to obtain the different types of carbides and matrix structures : 3%C-10%Cr-5%Mo-5%W(alloy No.1), 3%C-10%V-5% Mo-5%W(alloy No. 2) and 3%C-17%Cr-3% V(alloy No.3). The as-cast microstructures were investigated with optical and scanning electron microscopes. There existed two different types of carbides, $M_7C_3$ carbide with rod-like morphology and $M_6C$ carbide with fishbone-like one, and matrix in the alloy No. 1. The alloy No. 2 consisted of MC carbide with chunky and flaky type and needle-like $M_2C$ carbide, and matrix. The chunky type referred to primary MC carbide and the flaky one to eutectic MC carbide. The morphology of the alloy No. 3 represented a typical hypo-eutectic high chromium white cast iron composed of rod-like $M_7C_3$ carbide which is very sensitive to heat flow direction and matrix. To clarify the solidification sequence, each iron(50g) was remelted at 1723K in an alumina crucible using a silicon carbide resistance furnace under argon atmosphere. The molten iron was cooled at the rate of 10K/min and quenched into water at several temperatures during thermal analysis. The solidification structures of the specimen were found to consist of austenite dendrite(${\gamma}$), $ ({\gamma}+ M_7C_3)$ eutectic and $({\gamma}+ M_6C)$ eutectic in the alloy No. 1, proeutectic MC, austenite dendrite(${\gamma}$), (${\gamma}$+MC) eutectic and $({\gamma}+ M_2C)$ eutectic in the alloy No. 2, and proeutectic $M_7C_3$ and $ ({\gamma}+ M_7C_3)$ eutectic in the alloy No 3. respectively.

• Journal of Hydrogen and New Energy
• /
• v.24 no.1
• /
• pp.61-69
• /
• 2013

Polymer exchange membrane (PEM) fuel cells have multifunctional properties, and bipolar plates are one of the key components in these fuel cells. Generally, a bipolar plate has a gas flow path for hydrogen and oxygen liberated at the anode and cathode, respectively. In this study, the influence of iodine applied to a bipolar plate was investigated. Accordingly, we compared bipolar plates with and without iodine coating, and the performances of these plates were evaluated under operating conditions of $75^{\circ}C$ and 100% relative humidity. The membrane and platinum-carbon layer were affected by the iodine-coated bipolar plate. Bipolar plates coated with iodine and a membrane-electrode assembly (MEA) were investigated by electron probe microanalyzer (EPMA) and energy-dispersive x-ray spectroscopy (EDS) analysis. Polarization curves showed that the performance of a coated bipolar plate is approximately 19% higher than that of a plate without coating. Moreover, electrochemical impedance spectroscopy (EIS) analysis revealed that charge transfer resistance and membrane resistance decreased with the influence of the iodine charge transfer complex for fuel cells on the performance.

• Journal of the Microelectronics and Packaging Society
• /
• v.17 no.1
• /
• pp.81-88
• /
• 2010

Thermal annealing and electromigration test were performed at $150^{\circ}C$ and $4{\times}10^3\;A/cm^2$ conditions in order to investigate the effect of PCB surface finishs on the growth kinetics of intermetallic compound (IMC) in Sn-3.0Ag-0.5Cu solder bump. The surface finishes of the electrodes of printed circuit board (PCB) were organic solderability preservation (OSP), immersion Sn, and electroless Ni/immersion gold (ENIG). During thermal annealing, the OSP and immersion Sn show similar IMC growth velocity, while ENIG surface finish had much slower IMC growth velocity. Applying electric current accelerated IMC growth velocity and showed polarity effect due to directional electron flow.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.3
• /
• pp.73-79
• /
• 2003

This paper describes the characteristics of capacitor elements at self healing. Self healing events were forced to be created by the over-rated voltage of the capacitor elements. The self healing site was photographed by the Scanning Electron Microscope and the by-products of self healing were analyzed by the Energy Dispersive X-ray Spectrometer. Also the self healing site was analyzed by the Differential Scanning Calorimeter and the Fourier Transform Infrared Spectrometer. As a result, the main component of by-products due to the hum cut at self healing was carbon. The Fourier Transform Infrared analysis result of the self-healing specimen was similar to that of the virgin specimen, however, different from that of the specimen thermally treated at 500$^{\circ}C$. It was observed that heat flow peaks of virgin specimen were different from self-healing specimen by the Differential Scanning Calorimeter analysis.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.6
• /
• pp.417-421
• /
• 2018

$TiO_2$ has excellent photocatalytic properties and several studies have reported the increase in its specific surface area. The structure of $TiO_2$ nanofibers indicates promising improved photocatalytic properties and these nanofibers can thus potentially be applied in air pollution sensors and pollutant removal filters. In this study, a $TiO_2$ nanofiber was fabricated by the electrospinning method. The fabrication processing factors such as the applied voltage, the distance between nozzle and collector, and the inflow rate of solution were controlled. The precursor was titanium (IV) isopropoxide and as-spun $TiO_2$ nanofibers were heated at $450^{\circ}C$ for 2 h to obtain an anatase crystalline structure. The microstructure was analyzed using field emission scanning electron microscope (FE-SEM) and X-ray diffraction analysis (XRD). The anatase phase was observed in the $TiO_2$ nanofibers after heat treatment. The diameter of $TiO_2$ nanofibers increased with the flow rate, but decreased with decreasing applied voltage and nozzle to collector distance. The diameter of $TiO_2$ nanofibers was controlled in the range of 364 nm to 660 nm. These nanofibers are expected to be very useful in photocatalytic applications.