• Applied Microscopy
• /
• 제47권1호
• /
• pp.55-62
• /
• 2017

This paper describes experiments aimed at characterizing the behavior of field electron emitters fabricated by coating carbon fibers with epoxylite resin. Polyacrylonitrile carbon fibers of type VPR-19, thermally treated at $2,800^{\circ}C$, were used. Each was initially prepared in a "uncoated" state, by standard electro polishing and cleaning techniques, and was then examined in a scanning electron microscope. The fiber was then baked overnight in a field electron microscope (FEM) vacuum chamber. Current-voltage characteristics and FEM images were recorded on the following day or later. The fiber was then removed from the FEM, coated with resin, "cured" by baking, and replaced in the FEM. After another overnight bake, the FEM characterization measurements were repeated. The coated fibers had significantly better performance than uncoated fibers. This confirms the results of earlier experiments, and is thought to be due in part to the formation of a conducting channel in the resin over layer. For the coated fiber, lower voltages were needed to obtain the same emission current. The coated fibers have current-voltage characteristics that show smoother trends, with greater stability and repeatability. No switch-on phenomena were observed. In addition, the emission images on the phosphor-coated FEM screen were more concentrated, and hence brighter.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.490.2-490.2
• /
• 2014

Since the general solar cells accept sun light at the front side, excluding the electrode area, electrons move from the emitter to the front electrode and start to collect at the grid edge. Thus the edge of gridline can be important for electrical properties of screen-printed silicon solar cells. In this study, the improvement of electrical properties in screen-printed crystalline silicon solar cells by contact treatment of grid edge was investigated. The samples with $60{\Omega}/{\square}$ and $70{\Omega}/{\square}$ emitter were prepared. After front side of samples was deposited by SiNx commercial Ag paste and Al paste were printed at front side and rear side respectively. Each sample was co-fired between $670^{\circ}C$ and $780^{\circ}C$ in the rapid thermal processing (RTP). After the firing process, the cells were dipped in 2.5% hydrofluoric acid (HF) at room temperature for various times under 60 seconds and then rinsed in deionized water. (This is called "contact treatment") After dipping in HF for a certain period, the samples from each firing condition were compared by measurement. Cell performances were measured by Suns-Voc, solar simulator, the transfer length method and a field emission scanning electron microscope. According to HF treatment, once the thin glass layer at the grid edge was etched, the current transport was changed from tunneling via Ag colloids in the glass layer to direct transport via Ag colloids between the Ag bulk and the emitter. Thus, the transfer length as well as the specific contact resistance decreased. For more details a model of the current path was proposed to explain the effect of HF treatment at the edge of the Ag grid. It is expected that HF treatment may help to improve the contact of high sheet-resistance emitter as well as the contact of a high specific contact resistance.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.463-464
• /
• 2006

광산업 및 디스플레이 산업의 발전에 따라 관련 제품의 핵심 부품 및 소재 개발이 매우 중요하게 대두되고 있다. 전계방출 소자 및 back light가 되는 나노 발광체의 핵심소재중 하나인 CNT paste는 국내외에서 연구가 진행중이다. 본 연구에서는 메탄올속에서 초음파를 이용하여 분산시킨 CNT 분말, 유기 바인더, 용매, glass frit, Ag powder 등을 사용하여 paste를 만들고, TGA(Thermogravimetric Analyzer)와 SEM(Scanning Electron Microscopy) 분석에 의해 제조 공정의 최적화를 실시하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.456-458
• /
• 2004

We proposed a novel triode-type carbon nanotube field emitter arrays in which extracted gate is surrounded by CNT emitters. We carried out 3-dimensional numerical calculations of electrostatic potential for the proposed CNT-FEAs using the finite element method and compared the results with those obtained from the structure of conventional CNT-FEAs. It was found that the proposed structure could reduce the turn-on voltage for electron emission and improve beam focusing.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2007년도 춘계학술대회 논문집
• /
• pp.3-6
• /
• 2007

The Light brightness is to enhance the luminescence efficiency of phosphor including conductive material. In preparing the anode layer, phosphors mixed with conductive material prepared with pastes of polymer resin using by screen printing method. When the prepared anode layer bombarded by cold electron from emitter of cathode, it give rise to form the secondary electron from those of conductive materials such as ITO powder. Furthermore, we are expect to enhance the luminescence efficiency more than without conductive material.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1008-1011
• /
• 2005

In this study, the field emission display with carbon nanotube emitter is developed for the large size HDTV application. Two structures for electron beam focusing are developed on the typical top-gate cathode. The metal grid and focusing gate structure are proved to be effective for the focusing. The data switching voltage for the double gate structure is lower than 30V which is competitive value in respect of the cost for driver electronics. The brightness and color gamut are comparable to those of the commercial product such as CRT.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.349-349
• /
• 2011

탄소나노튜브의 전자방출 특성을 활용하면 저전압으로 냉전자를 빠른 스위칭 속도로 전자를 용이하게 제어가 가능하다. 이로 인한 고성능 엑스선 소스를 이용하여 의료영상진단과 보안검색 분야에서 많이 사용될 것으로 예상이 된다. 본 연구에서는 고성능 탄소나노튜브 기반 엑스선의 미소초점 형성을 위한 전자 방출 시뮬레이션을 실시하였다. 3극관(애노드, 게이트, 캐소드)에서 2개의 포커싱 전극을 추가한 5극선관의 전자방출 궤적에 대한 시뮬레이션을 진행하였다. 3극관을 구성하여 애노드와 게이트에 일정 전압을 정해준 후, 2개의 포커싱 전극의 전압, 포커싱 전극간의 거리, 그리고 포커싱 전극의 내부직경을 조절함으로써 애노드 상에서의 전자의 초점이 작아지는 것을 알 수 있었다. 마이크로 포커스 엑스레이 소스는 의료영상진단에 있어서 고해상도 의료기기로의 응용이 가능하다.

• 한국결정학회:학술대회논문집
• /
• 한국결정학회 2003년도 춘계학술연구발표회
• /
• pp.6-6
• /
• 2003

Highly crystalline 5H-polytypic form of sp3-bonded boron nitride (BN) was grown by pulsed-laser-vaporization of BN, where synchronous reactive-plasma packets assisted the crystal growth in the vapor phase. The structure of the product crystallites (˙5 micrometers) was confirmed by using transmission electron diffraction and electron energy loss spectroscopy. This material proved to have a sharp and dominant band at 225 nm by cathode luminescence at room temperatures and corresponding monochromatic images revealed that they uniformly emitted the ultraviolet light. Considering that cubic BN has already been doped as p- and n- type semiconductors, this material may be applied to the light-emitting devices working at almost the deepest limit of the UV region that is functional without vacuum.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.541-542
• /
• 2006

In this paper, I propose the field emission tip for the E-beam array system that is made by carbon nanotubes(CNT). CNT is one of the most expected future materials, because of its great mechanical, chemical and electrical characteristics. So CNT can be used for many applications such as electron emitter, sensor, single electron transistor and AFM tip. And CNT will be applied to our E-beam array system as field emission tip so we will improve the system's electrical characteristics.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.433-433
• /
• 2016

Carbon nanotubes (CNT) emitter has widely become an attractive mechanism that draws growing interests for cold cathode field emission. CNT yarns have demonstrated its potential as excellent field emitters. It was demonstrated that a small focal spot size was achieved by manipulating some electrical parameters, such as applied bias voltage at the mesh gate, and electrostatic focal lenses, geometrical parameters, such as axial distances of the anode, and the electrostatic focal lens from the cathode assembly, and the dimension of the opening of the electrostatic lens. Electrical-optics software was used to systematically investigate the behavior of the electron beam trajectory when the aforementioned variables were manipulated. The results of the experiment agree with the theoretical simulation results. Each variable has an individual effect on the electron beam focal spot size impinging on the target anode. An optimum condition of the parameters was obtained producing good quality of X-ray images. Also, MWCNT yarn was investigated for field emission characteristics and its contribution in the X-ray generation. The dry spinning method was used to fabricate MWCNT yarn from super MWCNTs, which was fabricated by MW-PECVD. The MWCNT yarn has a significant field emission capability in both diode and the triode X-ray generation structure compared to a MWCNT. The low-voltage-field emission of the MWCNT yarn can be attributed to the field enhancing effect of the yarn due to its shape and the contribution of the high-aspect-ratio nanotubes that protrude from the sides of the yarn. Observations of the use of filters on the development of X-ray images were also demonstrated. The amount of exposure time of the samples to the X-ray was also manipulated. The MWCNT yarn can be a good candidate for use in the low voltage field emission application of X-ray imaging.