• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.6
• /
• pp.716-723
• /
• 2011

The battery capacity of electric/hybrid vehicle is much larger than present automobile. For that reason, the connector of Green Car should be designed to transmit the high-electric voltage. In addition, the electromagnetic wave should be shielded to protect communication and signal circuits. In this study, shielding performance of the connector was analyzed through electromagnetic shield analysis, and a connector of Green Car was designed using thermoelectrical analysis, which is capable of transmitting the high-electric power. In the design of connector structure, the improved stability and workability was considered.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.1
• /
• pp.68-75
• /
• 2000

In this paper, we analyzed the radiation patterns of a monopole antenna mounted on cylinder and EM penetration problems in the complex structures by using FDTD method associated with 3-D PML absorbing boundary condition. In order to validate the proposed FDTD code, the radiation patterns of monopole antenna mounted on cylinders were compared with the exact Carter's solutions. As a results, the predicted radiation pattern exhibited excellent agreement with exact solution. And the FDTD code is applied to analyze the EM penetration problems in complex structures, Blackhawk helicopter. As the plane wave is excited, a significant amount of energy penetrates the helicopter structure, and it is dependent on aperture/airframe interface.

• Journal of electromagnetic engineering and science
• /
• v.13 no.2
• /
• pp.73-85
• /
• 2013

In this paper we present an alternative approach to addressing the problem of designing cloaks for radar targets, which have been dealt with in the past by using the transformation optics (TO) algorithm. The present design utilizes realistic materials, which can be fabricated in the laboratory, and are wideband as well as relatively insensitive to polarization and incident angle of the incoming wave. The design strategy, presented herein, circumvents the need to use metamaterials for cloak designs that are inherently narrowband, dispersive and highly sensitive to polarization and incident angle. A new interpretation of the TO algorithm is presented and is employed for the design of radar cross section-reducing absorbers for arbitrary targets, and not just for canonical shapes, e.g., cylinders. The topic of performance enhancement of the absorbers by using graphene materials and embedded frequency structure surfaces is briefly mentioned. The design procedure for planar absorbing covers is presented and their performance as wrappers of general objects is discussed. A number of test cases are included as examples to illustrate the application of the proposed design methodology, which is a modification of the classical TO paradigm.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.6
• /
• pp.64-71
• /
• 2004

The object of this study is to design the Radar Absorbing Structures (RAS) having sandwich structures in the X-band ($8.2{\sim}12.4GHz$) frequencies. Glass fabric/epoxy composites containing conductive carbon blacks and carbon fabric/epoxy composites were used for the face sheets. Polyurethane(PU) foams containing multi-walled carbon nanotube (MWNT) were used for the core. Their permittivities in the X-band were measured using the transmission line technique. The reflection loss characteristics for multi-layered sandwich structures were calculated using the theory of transmission and reflection in a multi-layered medium. Three kinds of specimens were fabricated and their reflection losses in the X-band were measured using the free space technique. Experimental results were in good agreements with simulated ones in 10dB absorbing bandwidth.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.10
• /
• pp.60-67
• /
• 1997

This paper presents a 3-D finite difference time domain (FDTD) method used for indoor propagation simulations where the electromagnetic wav eis uniformly excited on th eone of the wall in a building and affected by an indoor obstacles. In cases of simulation and measurement, the frequency of 851 MHz is used. The conductivities of walls, floor, ceiling and indoor obstacles are measured and used for simulations. These simulations are carried out using different boundary condition such as mur's absorbing boundary condition (ABC) and perfectly matched layer (PML) technique. The PML technique is found to be well-suited to this analysis because of it's smaller computational domain than mur's ABC. The measured signal strengths are compared to simulated values with good agreement.

• Journal of the Korean Ceramic Society
• /
• v.32 no.1
• /
• pp.25-30
• /
• 1995

The frequenc dependence of magnetic permeability($\mu$r) and dielectric constant($\varepsilon$r) in MHz-GHz frequency range and their relationships with microwave absorbing properties were investigated in sintered and composite Ni-Zn ferrites, respectively. It was confirmed that zero reflection condition was required the real parts of permeability and permittivity in sintered specimen, and the complex permeability, permittivity and dielectric loss tangent in composite specimen. The real part of permittivity varied with the replacement of nickel by manganese in sintered Ni-Zn ferrite. Therefore, we could control the matching frequency and matching thickness.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.5
• /
• pp.94-101
• /
• 1996

The purpose of this paper is to analyze the field distribution and the current distribution of leaky coaxial cable with the finite difference-tiem domain(FDTD) algorithm. finite difference equations of maxwell's equations are defined in cylindrical coordinate systems. To simulate the unbounded problem like a free space, the Mur's absorbing boundary conditon is also used. After modeling the leaky coaxial cable with the three dimensional grid structure, the transient resoponse of th efield distribution and the current distribution are depicted in the time domain.

• Korean Journal of Materials Research
• /
• v.5 no.5
• /
• pp.512-517
• /
• 1995

EMI 대책용 전자파 흡수체로 알려진 cu-Ni-쿠 페라이트를 분말야금법으로 제조하여, 성형압력과 소결온도의 변화에 따른 미세조직을 과낯ㄹ하고, 투과반사법으로 전자파 흡수능을 측정하여 조직과의 관계로 검토하였다. 하소는 공기중에서 90$0^{\circ}C$로 2시간동안 행하는 것이 최적이었다. 미세조직과 입자의 크기는 성형압과 소결온도로 제어할 수 있다. 100Mpa로 성형한 것이 치밀하고, 전자파 흡수특성이 우수하였다. 복소유전율과 복소투자율은 기공도와 소결밀도에 영향을 받았다. 전자파흡수능은 밀도보다는 입자의 크기에 더 큰 영향을 받았다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.2 s.93
• /
• pp.228-234
• /
• 2005

A magnetic composite as noise absorber of quasi-microwave band was developed. The Fe-Si-Al alloy powder were forged by attrition mill to get flaky shape. The magnetic composite sheet was fabricated in which powders are dispersed in polymer and aligned in the direction perpendicular to electromagnetic wave propagation. The permittivity of magnetic composite is increased as forging time increasing, while the permeability is decreased slightly. The maximum attenuation peak of reflection loss is shifted to lower fiequency range as milling time increasing, and the value of maximum attenuation peak is to get smaller gradually. From these result, we could designed a noise absorber sheet (t=1.0 mm) for quasi-microwave band, which is impedance matched at 1.4 GHz with respect to -8.2 dB reflection 1055.

• Composites Research
• /
• v.21 no.2
• /
• pp.31-35
• /
• 2008

In order to design light weight and high efficient electromagnetic wave absorbing materials, hollow magnetic particles have been introduced in this study. The electroless plating method has been utilized to coat Ni and Fe on the substrates of synthesized polystyrene particles of submicron size. Removing polystyrene particles by heat treatment resulted in hollow structures. Observation by SEM, TEM and EDS confirmed the surface morphology and coating thickness of Ni and Fe. Polymeric composites containing hollow particles were tested in order to compare the electromagnetic properties between Ni coated and Fe costed particles. The composite of 30 wt% Fe hollow particles showed the higher complex permeability than Ni hollow particles or the conventional barium ferrite particles.