• Journal of Welding and Joining
• /
• 제20권1호
• /
• pp.76-82
• /
• 2002

In these days, many advanced nations have enforced import restrictions against things emitting electromagnetic wave which has report that it is so harmful. In general, electromagnetic wave is composed of electric wave and magnetic wave. The reflection of electromagnetic wave is mainly reflected by conductive materials and the magnetism loss is generated by magnetic ferrite. The magnetism loss of ferrite is separated by eddy current loss, residual magnetism loss and hysteresis loss. Thermal sprayed coating is intended to manufacture because of simple processes and high efficient electromagnetic wave shielding. The high efficient thermal sprayed coatings were made from the magnetic ferrite materials that characterizes absorption of electromagnetic wave, and the electric conductive materials that characterize emitting of electromagnetic wave. This study was manufactured thermal sprayed coatings to improve absorption-efficiency, and measured the electromagnetic wave shielding efficiency. As the experimental results, high electromagnetic wave shield efficiency was obtained at wave frequency 2GHz to thermal sprayed ferrite coatings manufactured by size distribution range of spray powders, $38~88\mu\textrm{m}$.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제55권2호
• /
• pp.82-89
• /
• 2006

The electroencephalogram generated by light stimulation in human body of dark adaption state was measured and analyzed in the cases that electromagnetic wave was put in and not put in, respectively. Shieldroom being able to interrupt the light and the electromagnetic wave of outer was constructed, and the experimental system being able to apply any light and any electromagnetic wave was designed. When the electromagnetic wave was applied to body or not, the variation characteristics of each component in the electroencephalogram were i3s follows. The 6 wave was increased and the $\alpha$ wave and the $\beta$ wave were decreased in the case that the electromagnetic wave was applied, and the variation range of the $\Theta$ wave was small. And the influence of electromagnetic wave on human body was that the appearance time of the $\beta$ wave was late, and it moaned that the time of visual recognition was delayed.

• 한국지역사회생활과학회지
• /
• 제13권2호
• /
• pp.1-11
• /
• 2002

This study was conducted to estimate the amounts of the electromagnetic wave penetrating from a cellular phone in a pocket of dress shirt, as well as to test how different the penetration amounts were under the conditions of wearing. It was also investigated the possibilities that the amounts of the electromagnetic wave penetrating could be decreased by using twofold pocket or electromagnetic wave free fabric. The amounts of the electromagnetic wave penetrating were measured in the following five cases; one-layered pocket with 10 different fabrics as dress shirt, a pocket adding a layer of knitted cotton, two-layered pocket with same fabric as dress shirt, two-layered pocket adding a layer of knitted cotton, and one-layered pocket adding a layer of electromagnetic wave free fabric. Each of these five cases were measured using the front and back sides of a cellular phone facing to the body. The results were as follows; 1) The amounts of the electromagnetic wave penetrating were not significantly different in 10 different fabrics and were all above the caution range (0.02mW/$cm^2$). 2) The amounts of the electromagnetic wave penetrating in cases of the back side of the cellular phone to the body, were more than in cases of the front side. 3) There is a significantly differences in part on adding a knitted under wear to one and two layers of the pocket in the case of penetration amount under the wearing conditions. 4) The amounts of the electromagnetic wave penetrating in cases of adding a layer of electromagnetic wave free fabric, were close to the safe standard value of it. The above results suggested that facing the front side of cellular phone to the body and using extra layering with some electromagnetic wave free fabrics might have some protective effects again to the penetration amounts.

• 한국의류학회지
• /
• 제29권1호
• /
• pp.149-156
• /
• 2005

The purpose of this study was to produce the high quality of electromagnetic wave shielding fabrics. In this study, we have produced polyester fabrics by electroless Ag plating. The untreated polyester was etched with $4\%$ NaOH solution added accelerant(Benzyl Dimethyl Dodecyl Ammonium Chloride) then it was catalyzed by $SnCl_2$ solution and activated by $PdCl_2$ solution. Electroless Ag plating was carried out by changing conditions such as temperature. time, weight loss rate of polyester and kind of reducing agents. The electromagnetic wave shielding effectiveness of polyester fabric by electroless Ag plating was measured by RF Impedance Analyzer and element of electromagnetic wave shielding substance was measured using Electron probe micro analyzer. The results were as follows; The plating bath using potassium sodium tartrate by reducing agent was excellent electromagnetic wave shielding effectiveness. Element of electromagnetic wave shielding substance was silver. Electromagnetic wave shielding effectiveness was shown over 64dB at the temperature of $40^{\circ}C$, treating time 30min., weight loss rate $20\%$.

• Journal of electromagnetic engineering and science
• /
• 제17권3호
• /
• pp.165-167
• /
• 2017

We predict the electromagnetic wave propagation in space environments using geometrical optics. The effective indices of the troposphere, stratosphere, and ionosphere are computed, and the reflection, refraction, and attenuation of electromagnetic waves in space environments are calculated based on the ray tracing technique and geometrical optics. The influence of the refractive index and loss of atmosphere and the incident angle of the antenna on electromagnetic wave propagation is discussed.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.608-611
• /
• 2004

As the use of various electronic equipments has been increased recently according to industrialization and information network establishment, concern about electromagnetic wave exposed environment has also been increased. Therefore, this study aims to verify electromagnetic wave absorbing effects of inorganic paint that is made of carbon, electro-conductive materials with regard to its physical characteristics, its electromagnetic wave absorbing rate through a mock-up test for proving its effects in the indoor condition. The results are as follows: The results of running tests on electromagnetic wave absorbing inorganic paints for checking their requirements as painting material such as adherence degree, resistance to fine crack, resistance to washing, alkali-resistance, discoloration-resistance, etc. show that inorganic paints have the physical characteristics meeting the requirements for painting materials. In addition, it shows that the electromagnetic wave absorbing effect, in line with the number of paintings and the thickness of paintings, secures $75\~89\%$ of efficiency. And the mock-up test shows that the electromagnetic wave absorbing effect inside building is directly proportional to the distance from the source of electromagnetic wave such as electronic equipments.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2001년도 종합학술발표회 논문집 Vol.11 No.1
• /
• pp.304-309
• /
• 2001

With the development of electromagnetic communication technology and increased use of electromagnetic wave, the countermeasure of EMI(Electromagnetic Interference) becomes more important socially, and interest for the electromagnetic wave absorber has also increased. In this paper, we have studied characteristics of frequency dependency on complex permittivity and complex permeability according to the changes of composition rate and sintering temperature of NiCuZn ferrite also known as electromagnetic wave absorber and further looked into effect of electromagnetic wave absorption properties. From the measurement where the composition of Fe$_2$O$_3$ and ZnO of NiCuZn ferrite was fixed at 49 and 34 mol% respectively while composition of NiO and CuO has been varied at each test, we found out that initial permeability and permittivity were high and the absorbing ability of electromagnetic wave recorded best with loss tangent(${\mu}$r"/${\mu}$r′) displays more than 1 within the frequency band of 2MHz～9.5MHz when the composition ratio of NiO was ranged around 8.5～9.5 mol% and the sintering temperature was 1,080$^{\circ}C$.

• Journal of electromagnetic engineering and science
• /
• 제5권3호
• /
• pp.117-121
• /
• 2005

We compared electromagnetic(EM) wave absorption properties between Alnico magnet (A) and (B) with different magnetic properties. Also, we investigated the effect of carbon, thickness of absorbers, and Alnico contents on EM wave absorption, and clarified the relation between Alnico content and central frequency.

• 한국항해학회지
• /
• 제15권4호
• /
• pp.13-25
• /
• 1991

Recently, according to the development of electromagnetic wave technique, more frequent and powerfull wave radiation becomes inevitable and so electromagnetic environments has become worse accordingly. Electromagnetic wave absorber is known the most effective preventive remedy to cope with the EMI/EMC problem. To realize broad-band electromagnetic wave absorber, triple layered structure where an air layer is interposed between a sintered ferrite layer and a ruber ferrite layer was adopted. Computer simulation for optimum design and evaluation of absorption characteristics has been made. The results shows that designed broad-band electromagnetic wave absorber can be useful for EMI/EMC problem, especially reducing TV ghosts in both VHF and UHF bands by additionally an air layer and a thin rubber ferrite layer on the surface of conventional ferrite, without replacing it.

• 전자공학회논문지A
• /
• 제28A권12호
• /
• pp.19-23
• /
• 1991

A method for suppressing unwanted resonance modes by attaching an electromagnetic wave absorber onto a metal case was studied to prevent performance deterioration of electronic devices. The electromagnetic wave absorber fabricated for this study had an attenuation characteristics above 20dB in the frequency band from 450MHz, 1150MHz. A rectangular cavity resonator whose resonance frequencies of TE$_{101}$, TE$_{102}$ modes were 900MHz, 1250MHz, respectively, was made to measure attenuation for the electromagnetic wave absorber-metal assembly. The result showed that the resonance mode for high attenuation was sensitive to the location of electromagnetic wave absorber, and the attenuation characteristics above 20dB could be obtained when electromagnetic wave absorber was properly positioned.