• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.121-124
• /
• 2000

In mobile communication repeaters, very small size with sharp skirt response is needed as the BPF performances. The passband flatness of the proper BPF becomes very bad due to the low value of the resonator Q-factor used in the BPF. Which could girt serious level unbalance between channels. This flatness problem can he solved by a kind of compensated filler, which has 'reverse-curve'or 'concave shape'as the passband response. In this paper, the design method of the proposed 'concave bandpass filter'without matching and loss problems is presented. The designed and fabricated filter can properly and easily compensate the convex or bad flat passband response.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.255-258
• /
• 2000

최근 경제 활동의 증가로 인하여 통신 서비스에 대한 이동성, 편의성, 및 개인에 대한 요구가 증대되고 있다. 현재 세계각국에서는 이동통신 서비스인 셀룰라 이동통신과 개인 휴대 통신인 PCS(Personal Communication System)가 상용화되고 있다. 1900MHz 대역은 셀룰라 800 MHz에 비해 전파 특성상 전파환경에 따른 전파의 감쇄 및 회전손실 등으로 인한 전파 경로 손실이 증가 할 것으로 본다. 본 논문에서는 바다 해수면의 영향에 따른 800MHz대역과 1900MHz 대역에서 주파수에 따른 경로 손실 차를 실측 Data를 이용하여 비교하였으며 실측 Data를 이용하여 전파모델을 만들어 LGE에서 자체 개발한 전파 분석 시뮬레이션 툴로 Coverage 영역을 비교하였다.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.302-305
• /
• 2000

최근에 ITU-R에서 30～3,000MHz 주파수 범위에서 사용할 수 있는 포괄적인 전계 강도 커브를 제시하고 있다. ITU-R Question 중의 하나인 의제 210/3에서 요구하는 내용은 '30MHz～3GHz 대역의 육상이동과 지상방송 업무를 위한 전파전파 예측절차'이다. 이러한 의제를 WP SG3에서 연구하여 부속서 3K/TEMP/4에 정리하였다. 본 논문에서는 위 부속서 3K/TEMP/4에 나와있는 전송손실 예측 그래프의 적용범위와 적용환경을 알아보기 위해 일반적인 실험적 경로손실 예측식인 Okumura-Hata 모델 그리고 Cost231-Hata 모델과 비교 분석하였다.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.75-78
• /
• 2000

Since the most of malfunctions in the industrial equipment controlled by processors is occured by the Electrical Fast Transient(EFT), the International Electrotechnical Commission(IEC) prepared the dummy signal to test the immunity level of the equipments. In this paper. we designed a new EMC filter for power line in break-box, which is consist of the feed-through capacitor and ferrite materials with high permeability which was wound or inserted in the second layer of the power cable in order to increase common mode inductance. We have obtained a excellent insertion loss characteristics over wide frequency band from 100 KHz up to 6 GHz. It is expected that the new EMC filter could be effectively used for industrial, MIL, and medical equipments to reduce a malfunctions and be suitable for IEC 61000-4-4.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.293-296
• /
• 2002

In this paper, we proposed a beam tilting microstrip patch array antenna for the reception of satellite signals by using low cost copper etched polyester films and foams. The configuration and coupling mechanism of the proposed antenna are similar to the dipole Yagi-Uda antenna. It is composed of 3 layers of polyester films and three layers of foam. In order to prevent unwanted radiation and coupling loss by microstrip feeding networks and parasitic patches, a stacked layer with rectangular slots above the driver patch array is inserted. The 16${\times}$8 element microstrip Patch way antenna is Presented by experimental results. Its beam patterns are affected by many parameters such as sizes of the patches, gap between the patches. characteristics of the substrates, feeding method, etc. Owing to its complexities of various design parameters, both simulation and experiment were performed. The fabricated antenna received DBS signal from KOREASAT 3 by doing nothing but adjusting azimuth direction.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.132-135
• /
• 2002

A RF amplitude equalizer is designed to improve in-band flatness of Rf filters and/or systems using two dielectric resonators and a 90$^{\circ}$ hybrid. The equalizer has good return loss characteristics and V shaped S$_{21}$ response in passband which is suitable to compensate the ripple degradation due to insufficient quality factors of used resonators or narrow band width of filters or systems. After being connected to the equalizer, a 5-pole BPF at 1957MHz, which has 10 MHz bandwidth and 6㏈ ripple, shows only 1.8㏈ in-band ripple and good in- and out- band matched responses within used hybrid bandwidth without additional matching networks.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.161-164
• /
• 2002

In this paper, a design technique is introduced for designing a 360-degree linear analog phase shifter at 1.8㎓. Using tunable short-circuit terminated comb-line filters as reactive loads, the circuit gives a very small insertion loss(less than 0.1㏈) and an almost linear phase shifter over the filter bandwidth for the full 360-degree range. We were showed large phase variation with small capacitance variation in the quadrature hybrid coupler using tunable shorted terminated combline filters.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.370-374
• /
• 2002

This paper describes the design and fabrication of distributed analog phase shifter circuit. The phase shifter consist of coplanar waveguide(CPW) lines that are periodically loaded with voltage tunable (Ba,Sr)TiO$_3$ thin film interdigital(IDT) capacitors deposited by the pulsed laser deposition(PLD) on (001) MgO single crystals. The phase velocity on these IDT loaded CPW lines is a function of applied bias voltage, thus resulting in analog phase shifting circuits. The measured differential phase shift is 48$^{\circ}$ and the insertion loss decreases from -5㏈ to -3㏈ with increasing bias voltage from 0 to 40 V at 100㎐.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.423-433
• /
• 2002

A very fast method of moments(MoM) for the analysis of microstrip structure is considered based upon the use of rooftop basis and razor test functions in conjunction with a new closed-form Green's functions. The present method presents a robust approach to obtain the Green's functions which can be derived by use of only one set of approximation parameters independently of operating frequency range. Moreover, using the present MoM scheme, the MoM matrix elements can be analytically evaluated with few number of terms in comparison with the previous method. So, the computational efficiency can be improved significantly without loss of the precision. In order to check the validity of the present method, performance is demonstrated for the example of a coaxially-fed microstrip transmission line and the present results are compared with the previous results.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.434-444
• /
• 2002

본 논문에서는 기존의 RF 여파기가 대역 내에서만 정합이 되는 특성을 개선하여 대역 외에서도 50$\Omega$ 정합 특성을 가지는 여파기 설계 기술을 제안하였다. 대역 외에서 정합 시켜 주는 방법으로 결합기와 대역 통과 여파기로 구성된 Balance Type과 결합기와 대역 저지 여파기로 대역 통과 여파기 특성을 가지는 Reflection Type을 제시하여 그 특성을 확인하였다. 각각의 형태는 광대역 90도 3-㏈ 결합기를 사용한 것으로 결합기의 대역폭과 진폭 및 위상 오차에 따라 저지 대역에서의 정합 특성이 좌우되며, 이에 광대역의 3-㏈ 결합기를 설계 및 적용하여 광대역의 반사 손실 개선 효과를 얻을 수 있었다. 제작 결과 Balance type의 경우 1.2 GHz~2.6GHz까지 대역 내에서 -10㏈에서 -15 ㏈의 반사 손실 특성을 가지고 대역 저지 특성이 우수하며, Reflection type은 DC에서 3.3GHz까지 반사손실이 -15 ㏈ 내외로 광대역 정합 특성을 가진다. 특히, 저주파 반사 특성이 우수하여 저주파 발진 가능성이 큰 회로 설계에 유용하다.