• Journal of electromagnetic engineering and science
• /
• 제1권2호
• /
• pp.166-172
• /
• 2001

A novel RF tunable bandpass filter structure using dielectric resonators and varactor diodes is considered for the optimization to achieve constant bandwidth with minimum passband insertion loss. The coupling between resonators is realized by coupling windows and series lumped L, C elements are used to realize the input/output stage couplings. A 5 poles, 0.01 dB ripple Chebyshev type filter tuned from 800 MHz~900 MHz is designed and presented in this paper. The passband bandwidth for the design is 10 MHz (fractional bandwidth = 1.2 %). Experimental results show that the 3 dB passband bandwidth variation is 12.04 MHz~12.16 MHz (less than 1 %) and passband insertion loss is 15 dB~7 dB depending on the tuning voltages.

• 한국전자파학회논문지
• /
• 제11권3호
• /
• pp.410-418
• /
• 2000

본 논문에서는 27GHz에서 전파환경별 경로손실을 측정하고, 각 수신지점에서 5분간 측정된 경로손실 데이터의 중앙값, 최대값, 최소값을 선형회귀 모델로 모델링하고 분석하였다. 측정 결과를 살펴볼 때, 밀리미터파 대역 가시경로의 경우에도 도심이나 부심 환경에서는 추가의 경로손실을 고려해야 할 것으로 생각된다.

• Journal of Electrical Engineering and Technology
• /
• 제9권1호
• /
• pp.114-120
• /
• 2014

In this paper, a method for multi-physics analysis of the temperature-dependent properties of an oil-immersed transformer is discussed. To couple thermal fields with electromagnetic and fluid fields, an algorithm employing a user defined function (UDF) is proposed. Using electromagnetic analysis, electric power loss dependent on temperature rise is calculated; these are used as input data for multi-physics analysis in order to predict the temperature rise. A heat transfer coefficient is applied only at the outermost boundary between transformer and the atmosphere in order to reduce the analysis region. To verify the validity of the proposed method, the predicted temperature rises in high-voltage (HV) and low-voltage (LV) windings and radiators were compared with the experimental values.

• 한국화재소방학회논문지
• /
• 제30권4호
• /
• pp.94-102
• /
• 2016

EMP 방호용 차폐 시설을 구축 할 때 소화 배관들의 방호 처리를 위하여 WBC 효과를 이용하며, 차폐도를 높이기 위해서 소화 배관 내부에 허니컴을 삽입한다. 이때 허니컴 단위 셀의 크기가 작으면 물의 흐름에 지장을 주며, 침전물에 의하여 소화 배관이 막히게 된다. 이것을 방지하기 위하여, 물의 분극손실에 의한 차폐도를 이용해서, 허니컴 셀의 크기는 키우고, 두께는 얇게 하면서도 요구하는 차폐도를 얻을 수 있는 설계 방법을 제시하였다.

• 한국전자파학회논문지
• /
• 제11권6호
• /
• pp.893-899
• /
• 2000

본 논문에서는 0.65 $\mu$m CMOS 공정을 이용한 900MHz 대역의 저잡음 증폭기를 설계하였다. 입력 매칭은 전력소모가 가정 적고 NF도 가장 작은 인덕터 종단 정합회로를 사용하였다. 온칩 상에 바이어스 안정화를 포한시켰으며, 전원은 3V를 공급하였을 때 전력 소모는 39mW이다. 설계된 저잡음 증폭기의 특성능 900MHz 대역에서 13.2dB의 이득과 4.8dB의 Noise Figure가 측정이 되었다. 입력 반사손실으 -26dB, 츨력반사 손실은 -17dB을 얻었으며, 입력 1-dB 억압 -12dBm을 얻었다.

• Journal of electromagnetic engineering and science
• /
• 제2권2호
• /
• pp.105-111
• /
• 2002

New high-performance Ka-band waveguide-to-microstrip transitions for millimeter-wave transceiver applications have been developed and characterized. These transitions are probe-type, but the dielectric material completely covers the whole waveguide aperture, thus providing moisture-barrier and robustness in the probe section. The new probe transitions are also designed to be less sensitive to fabrication tolerances. Further performance enhancements have been obtained by placing vias around the waveguide aperture. Also, the resonance phenomena associated with waveguide wall-penetration have been identified. The developed probe transitions provide insertion loss less than 0.4 dB over entire Ka-band frequencies, but can be optimized for narrowband applications with insertion loss less than 0.2 dB.

• 한국전기전자재료학회논문지
• /
• 제15권2호
• /
• pp.178-183
• /
• 2002

The effects of Dy$_2$O$_3$and Er$_2$O$_3$addition on the electromagnetic properties of Mn-Zn ferrite were investigated in the doping concentration range from 0.05 wt% to 0.25 wt%. All samples were prepared by standard fabrication of ferrite ceramics. The XRD patterns of sample were observed spinel and secondary phase. The densities of sample were showed nearly constant values. As the increased additive, electrical resistivity, initial permeability and real component of the series complex permeability increased with setting limits each other. Excess doped with Dy$_2$O$_3$ and Er$_2$O$_3$, those values decreased. The maximum electrical resistivity was observed with 0.15 we% and initial permeability was observed with 0.05 wt%. Magnetic loss decreased with additive and then increased in proportion to increased.

• 한국전자파학회논문지
• /
• 제11권1호
• /
• pp.76-83
• /
• 2000

본 논문에서는 세라믹 동축 공진기와 Varactor Diode를 이용하여 800MHz~900MHz에서 2단 가변 대역통과 여파기를 설계 제작하였다. ABCD Parameter를 이용하여 $\pi$형 Inverter를 T형 등가회로로 변환하여 Varactor Diode 수를 2개로 최적화하였다. 가변대역은 800MHz~900MHz이며 삽입손실을 $405dB\pm0.5dB$ 이내 반사손실은 15dB 이상으로 설계하였다. 제작된 대역통과 여파기는 Simulation 결과와 잘 일치하였다.

• Journal of electromagnetic engineering and science
• /
• 제13권4호
• /
• pp.245-250
• /
• 2013

This paper presents a tunable bandpass filter based on the varactor-loaded composite right- and left-handed transmission line (CRLH-TL). The proposed filter is composed of one CRLH-TL unit cell, which corresponds to the third-order bandpass filter. The tunable bandpass filter is designed using only lumped-elements. The use of lumped elements saves space and lowers the fabrication cost. The size of the proposed tunable bandpass filter is $17mm{\times}5mm$, neglecting the feed lines and DC lines. All of the varactors are controlled by one DC bias. The center frequency of the bandpass filter can be controlled by varying the value of the varactors. The tunable range of the center frequency is from 412.5 to 670 MHz. The insertion loss is less than 3 dB, the return loss is more than 10 dB in the passband.

• Journal of electromagnetic engineering and science
• /
• 제17권1호
• /
• pp.34-38
• /
• 2017

In this paper, we propose an active tunable bandpass filter (BPF) for efficient spectrum sensing in the TV White Space (TVWS) band. By designing a narrow bandwidth, it is possible to improve the sensing probability. The basic circuit configuration involves switching the PIN diode compromising capacitor bank to change the capacitance of the LC resonant circuit. To cover the whole TVWS band effectively, we add a varactor diode, and the bandwidth is set to 25-MHz. We improve the insertion loss by using the active capacitance circuit. The tunable BPF in the TVWS band with a 20-MHz interval is designed to have 11 channels with a bandwidth of 25 MHz and a low insertion loss of 1.7-2.0 dB.