Given their structural arrangement, photovoltaic (PV) modules exhibit parasitic capacitance, which creates a path for high-frequency current during zero-state switching of the converter in transformerless systems. This current has to be limited to ensure safety and electromagnetic compatibility. Many solutions that can minimize or completely avoid this phenomenon, are available. However, most of these solutions are patented because they rely on specific and often complex converter topologies. This study aims to solve this problem by introducing a solution based on a classic converter topology with an appropriate modulation technique and passive filtering. A 5.5 kW single-phase residential PV system that consists of DC-DC boost stage and DC-AC H-bridge converter is considered. Control schemes for both converter stages are presented. An overview of existing modulation techniques for H-bridge converter is provided, and a modification of hybrid modulation is proposed. A system prototype is built for the experimental verification. As shown in the study, with simple filtering and proper selection of switching states, achieving low leakage current level is possible while maintaining high converter efficiency and required energy quality.
We studied the partial discharge detecting by sensing electromagnetic pulse emitted from the partial discharge source in the stator winding of HV Rotating Machine with UWB sensor. In this study, we designed new type of compact low frequency UWB sensor based on micro-strip technology and made experiments of offline dismantled testing compare with the traditional HFCT as a reference sensor in the laboratory. We investigated internal discharge, surface discharge, corona discharge and non-defected state normal stator on pre-made stator winding by using UWB patch sensor.
Online monitoring system is becoming an essential element of railway traction system for utilized to condition based malignance management and various techniques currently employed in railway traction system. Among the various techniques, it is efficient to detect partial discharge signals by electromagnetic wave detection in order to detect insulation fault of rectifier. Although VHF (Very High Frequency), UHF (Ultra High Frequency) sensors were adopted to detect partial discharge of power facilities, due to characteristics of urban railway, excessive noise occurs from 500 MHz to 1.5 GHz on UHF bandwidth. In this paper a new measurement system able to monitoring the conditions of power facilities on DC substation in metro was studied and set up. The system uses UHF sensors to measure the partial discharge of the rectifier due to electric faulting and dielectric breakdown. Comparison and estimation for performance of SHF sensor which had devised to detect partial discharge signal of urban railway rectifier has conducted. In order to estimate performance of SHF sensor, we have compared the sensor with existing UHF sensor on sensitivity upon frequency bandwidth generated by pulse generator, and also we have verified performance of the SHF sensor by detection results of partial discharge signal from urban railway rectifier.
In order to reduce the capital and overall operating cost of a fuel-cell system, a high-efficiency fuel-cell power inverter with a simple framework is required. The high-order two-inductance two-capacitance (LLCC) resonant technique is adopted in this study to implement a low-frequency 60-Hz sine wave voltage inverter utilized in the proton exchange membrane fuel-cell (PEMFC) system. The methodology for inverting dc voltage into low-frequency ac boltage is usually generated by the pulse-width-modulation (PWM) technique. However, the PWM-type inverter output has high-frequency harmonic components. Although an adequately designed filter could be utilized to overcome this problem, there are still some undesirable effects introduced by the high-frequency switching loss, electromagnetic-interference, harmonic current, and load variation. A novel power inverter via the LLCC resonant technique is designed for inverting dc voltage into 60-Hz ac sine wave voltage in the PEMFC system. This circuit scheme has the merits of low harmonic components, soft switching, high efficiency, and simplified implementation. The effectiveness of the proposed resonant inverter used for the PEMFC system is verified by numerical simulations and experimental results.
When a metal sprayed film of several hundred ㎛ on the concrete surface is possible to 80 dB of shielding effect electromagnetic waves (ElectroMagnetic Pulse, EMP). Therefore, in this study, as a way to secure EMP shielding performance by applying a metal spray coating showing excellent EMP shielding performance to a concrete structure, the metal spray welding efficiency and thin film adhesion performance according to the concrete spray direction and surface treatment method were evaluated. Metal sprayed efficieny according to the metal spraying direction and method was confirmed that the difference was insignificant by applying the roughening agent. However, the method of strengthening the concrete surface and applying the sealing agent show maximum adhesion strength of 3.98 MPa compared to other methods, and it is judged that this method can be utilized for the metal spraying method for concrete EMP shielding.
현장 물리탐사 수행 시 상용화된 장비로는 탐사 대상 매질의 물성, 대상체의 크기, 모양 등의 탐사목적 및 현장여건에 의해 탐사가 불가능 하거나 탐사 목적에 맞는 분해능을 얻지 못하는 경우를 종종 만나게 된다. 이러한 다양한 현장 조건 및 탐사 목적에 효과적으로 적용할 수 있는 다목적 물리탐사 측정 시스템을 개발하였다. 이 다목적 측정 시스템은 PXI를 기반으로 하며 A/D 변환기 또는 GPIB 인터페이스를 이용한 측정 장치를 통해 신호를 측정하게 되며 확장성이 커 다양한 문제에 적용이 가능하다. 구성된 측정 시스템을 이용하여 시추공 레이다 탐사 시스템과 시추공 초음파 탐사 시스템, 전자기적 잡음 측정 시스템을 구축하였다. 시추공 레이다 탐사 시스템은 네트워크 분석기를 GPIB를 통해 제어하고 현장 조건에 따라 임의로 안테나의 길이 조절이 가능한 스텝 주파수 레이다 탐사 시스템이며, 시추공 초음파 탐사 시스템은 압전 송수신기 센서, 고출력 송신기와 A/D 변환기로 구성되어 시추공 내에서 초음파를 이용하여 착맥된 지하공동의 범위를 측정하기 위해 구성된 시스템이며, 전자기적 잡음 측정 시스템은 3개의 자기장 센서와 2개의 전기장 센서 그리고 A/D 변환기로 구성되며 임의로 측정시간과 샘플링 주파수의 조절이 가능하고 임의의 시간에 예약 측정이 가능한 시스템이다. 시추공 레이다 탐사 시스템은 상용 시스템으로 불가능했던 지하공동의 넓이와 지장물을 찾는 탐사에서 효과적인 결과를 보여주었으며, 시추공 초음파 탐사 시스템도 지하공동의 넓이를 측정하는 실험에서 가능성을 확인할 수 있었다. 한편 전자기적 잡음 측정 시스템을 이용하여 도심지 내 전자기적 잡음특성을 파악할 수 있었으며, 이를 변형하여 전기비저항 탐사 시 사용되는 다양한 케이블에 대한 케이블 내의 전자기적 유도 현상 및 그에 따른 신호 왜곡을 규명하는 실험에 적용하여 시스템의 확장성을 확인하였다.
최근 금속을 포함하여 다양한 재질의 지뢰를 탐지할 수 있는 지면 투과 레이더 (Ground Penetrating Radar, GPR)가 지뢰 탐지 분야에서 주목 받고 있으며 지면 투과 레이더를 이용한 지뢰 탐지 기술이 활발하게 연구되고 있다. 본 논문에서는 1차원 지면 투과 레이더 배열을 이용하여 지뢰가 존재할 가능성이 높은 후보 지점을 검출하는 방법을 제안하였다. 제안 기법은 먼저 지면 투과 레이더에 수신되는 신호 세기의 비선형적 감쇠 특성을 반영하여, 지연 시간에 따른 지면 투과 레이더 응답 신호의 세기를 효과적으로 나타낼 수 있는 회귀 모델을 추정하였다. 이를 토대로 지면 투과 레이더 응답 신호를 분석해보면, 토양 신호들은 주로 회귀 모델의 근처에 밀집되어 있고, 지뢰일 가능성이 있는 후보 신호들은 회귀 모델로부터 멀리 떨어져서 분포하는 특성을 보인다. 이러한 사실을 기반으로, 지면 투과 레이더의 측정값과 회귀 모델의 예측 값에 대한 예측 오차를 계산하여 토양 신호로부터 지뢰일 가능성이 있는 후보 신호들을 분리하였다. 후보 신호에는 잡음과 표적 신호가 섞여 있으므로 표적 신호가 갖는 고유한 기하학적 특성을 이용하여 최종적으로 표적 신호를 검출하였다. 성능 검증을 위해 실내 환경에서 획득한 지면 투과 레이더 데이터를 이용하여 실험을 수행한 결과, 제안하는 전처리 기법의 지뢰 탐지율 대비 오경보율이 낮은 것을 확인할 수 있었다.
본 논문에서는 고전압 스위치와 팻 다이폴 안테나로 구성되는 광대역 LC 오실레이터를 설계 및 제작하고 방사 특성에 관해 분석하였다. 제안된 광대역 LC 오실레이터는 Marx generator를 고전압 펄스 전원 장치로 사용하며 지향성을 높이기 위해 $90^{\circ}$ 코너 리플렉터를 사용한다. 시뮬레이션 및 측정 파형을 분석한 결과, 팻 다이폴을 연결하지 않은 고전압 스위치는 수신 전력을 기준으로 약 9%(${\lambda}_1=0.7\;m$)의 3 dB 대역폭을 가지며, 고전압 스위치와 팻 다이폴 안테나로 구성되는 LC 오실레이터는 약 30%(${\lambda}_2=1\;m$)의 대역폭을 가진다. 결과적으로 팻 다이폴 안테나가 방사 전력뿐만 아니라 동작 주파수 및 대역폭에 영향을 미치는 것을 확인할 수 있었다. 본 논문의 연구 내용은 고전압 스위치와 팻 다이폴 안테나로 구성되는 광대역 LC 오실레이터 설계 시 동작 주파수와 방사 전력을 결정하는데 있어서 매우 유용할 것으로 판단된다.
비행체 탑재 레이다는 민군 겸용으로 기상에 관계없이 전천후로 비행체의 안전 항행, 임무 감시, 사격 통제, 충돌 회피, 이착륙 등 비행에 필수적인 항공 전자 장치이다. 본 논문에서는 헬기 탑재 다중 모드 X-밴드 펄스 도플러 레이다 시험 모델의 설계, 제작 및 비행 시험 결과를 제시한다. 레이다 시스템은 안테나부, 송수신부, 신호처리부와 전시부의 4개의 LRU로 구성되며, 개발 기술은 평판 슬롯 배열 안테나, TWTA 송신기, coherent I/Q detector, 디지털 펄스 압축, MTI, DSP 기반 도플러 FFT 필터, 적응 CFAR, 도플러 추정보상 기법, 비행 안정화 및 TWS 추적 처리기를 포함한다. 개발된 레이다 시스템의 설계 성능은 다양한 지상 고정 및 이동 시험과 헬기 탑재 비행 시험을 통하여 이동 비행체 이동 클러터 보상과 MTD 성능을 확인하였다.
본 논문에서는 X-대역에서 GaN HEMT 소자의 로드-풀 측정을 통한 40 W급 전력증폭기 모듈의 설계, 제작을 보였다. 전력증폭기의 설계에 적용하기 위한 능동 소자로, 최근 발표된 TriQuint사의 GaN HEMT 소자를 선정하였다. 로드-풀 측정 시스템의 임피던스 튜너의 임피던스 범위 제한으로 인하여, 시험치구 내에 사전-정합 회로를 구성하였다. 사전-정합 회로가 포함된 로드-풀 측정을 통해 최적 입 출력 임피던스를 도출하기 위하여, 사전-정합 회로의 2-포트 S-파라미터가 필요하며, 이의 새로운 추출 방법을 제안하였다. 이와 같이 결정된 사전-정합 회로의 S-파라미터를 반영한 로드-풀 측정을 통해 도출된 최적 입 출력 임피던스는 데이터 시트와 근접한 결과를 주며, 이를 통해 측정의 타당성을 확인하였다. 전력증폭기의 정합 회로는 도출된 최적 임피던스로부터 EM co-simulation을 이용하여 설계하였다. 제작된 전력증폭기는 15${\times}$17.8 $mm^2$으로 소형의 크기를 가지며, 10 usec의 펄스 폭, 10 % duty의 펄스 입력 및 드레인 스위칭 상태에서, 9~9.5 GHz 대역 내 출력은 46.7~46.3 dBm, 전력 이득은 8.7~8.3 dB, 효율은 약 35 %의 특성을 보인다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.