• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.25-28
• /
• 2001

In this paper. to eliminate a cross-polarization interference caused by co-channel dual polarization technique of digital radio relay system(DRRS), a cross-polarization interference canceller(XPIC) is analysed in terms of the analytical modeling, digital design, and its performance. By virtue of a 13-tap adaptive equalizer and XPIC, about 23dB in XPIC improvement can be obtained by computer simulation. To show the operation of designed XPIC, some simulated results are reviewed under 64-QAM DRRS with co -channel dual Polarization.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.152-156
• /
• 2001

본 논문에서는 단일 DGS의 전송특성을 ABCD 파라미터로 모델링하여 연속한 N개의 DGS 분석 및 설계를 용이 하게 하였다. 모델링된 식의 검증을 위해 연속된 N개의 주기적 DGS에서 전송특성을 이론, 회로 시뮬레이션, EM 시뮬레이션을 비교하였다. 또한 응용 예로서, 능동안테나의 불요 고조파가 방사하는 것을 저지하기 위한 DGS를 설계 및 시뮬레이션하여 제시된 방법론의 타당성을 검증하였다.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.176-179
• /
• 2001

본 논문에서는 접지면에 스파이럴 형태로 식각된 패턴을 갖는 DGS (Defected Ground Structure) 전송선로가 제시되었다. 제시된 스파이럴 DGS 회로에 대한 새로운 등가회로 모델을 제안하였고 등가회로의 각 파라미터는 EM-시뮬레이션과 DGS의 공진 특성 조건식으로부터 유도하였다. 스파이럴 DGS의 등가회로는 λ/2 단락 전송선로와 병렬로 연결된 인턱터로 구성된 비교적 간단한 구조로 제시되었다. 등가회로의 각 파라미터를 추출하고 기존의 아령 형태의 DGS 회로와 특성을 비교하여 장단점에 따른 그 응용성을 고찰하였다.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.2
• /
• pp.3-14
• /
• 2013

In this paper, key design issues and considerations for Signal Integrity(SI) and Power Integrity(PI) of a TSV-based 3D IC are introduced. For the signal integrity and power integrity of a TSV-based 3-D IC channel, analytical modeling and analysis results of a TSV-based 3-D channel and power delivery network (PDN) are presented. In addition, various design techniques and solutions which are to improve the electrical performance of a 3-D IC are investigated.

• Proceedings of the KSEEG Conference
• /
• 2000.04b
• /
• pp.166-167
• /
• 2000

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.294-298
• /
• 2003

In this paper, the modeling and design of high-Q multilayer passives have been investigated, and multilayer diplexer for GSM/DCS applications has been designed and fabricated using the passives. To minimize the system, the configuration of a multilayer inductor has involved a square spiral structure. Modeling of a multilayer inductor was performed by the subsystems of distributed components, and using the modeling the optimal structures of the high-Q multilayer inductor could be designed by analyzing parasitics and couplings which affect their frequency characteristics. Multilayer diplexer for GSM/DCS application has been designed and fabricated using LTCC technology. LPF for GSM band had the passband insertion loss of less than 0.55 dB, the return loss of more than 12 dB, and the isolation level of more than 26 dB by locating attenuation pole at 1800 MHz. HPF for DCS band had the passband insertion loss of less than 0.82 dB, the return loss of more than 11 dB, and the isolation level of more than 38 dB by locating attenuation pole at 930 MHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.5
• /
• pp.777-786
• /
• 2001

In this paper, as one of countermeasure techniques for a frequency selective fading, a digital slope equalizer(DSE) for 64-QAM digital radio relay system is analyzed in terms of principle, channel modeling, and digital implementation. Also computer simulations have been performed for DSE with a complex 13-tap adaptive time domain equalizer chip. It is shown that about 4.5 dB improvement in system signature can be obtained at the channel edge, and a variety of simulated results are reviewed in view of DSE modeling limit, operating frequency, control coefficient, signal constellation, and system signature. Finally, the functions of DSE chip confirmed up to 61 MHz clock operation are illustrated.

• Proceedings of the KIEE Conference
• /
• 2002.04a
• /
• pp.216-218
• /
• 2002

This study is the modeling of resistive type SFCLs. There was numerical modeling and simulation using EMTP in the conventional modeling of SFCL. The numerical modeling was presented an analysis of numerical characteristic of SFCL. And the modeling using EMTP was made up of the study for setting method of specific parameters of a SFCL. This paper proposes the model of resistive type superconducting fault current limiter using EMTDC(Electromagnetic transients for DC analysis program). The simulation schemes that can be applied to the utility network readily and cheaply under various conditions considering the sort of fault, the capacity of systems as well are strongly expected and emphasized among researchers.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1995.03a
• /
• pp.34-39
• /
• 1995

To reduce the shock in shifting the clutches and the brakes in automatic transmission have to be connected smoothly and disconnected rapidly. It is PCSV(Pressure Control Solenoid Valve) that play this role of automatic transmission. In this paper there were two steps in the analysis of the PCSV. The first step was modeling the elctromagnet by the permeance method. The second step was modeling the hydraulic circuit by the pressure differential equation. In addition to this modeling a experiment was performed and the commercial package program was used in order to justify modeling. The result of modeling coincide with the result of experiment and commercial package program. As a result this modeling is usable in analysis of dynamic characteractic of the PCSV.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.3
• /
• pp.331-336
• /
• 2013

In this paper, plasma modeling is achieved using fluid dynamics, thereby electron density is derived. The way proposes the key to overcoming the limitations of conventional researches which adopt simplified plasma model. The result is coupled with Maxwell-Boltzmann system in order to calculate scattering waves in various incident angle. The first part is dedicated to perform plasma modeling in dielectric barrier discharge(DBD) structure. Suzen-Huang model is adopted among various models due to the fact that it uses time independent variables to calculated potential and electron distribution in static system. The second part deals with finite difference time domain(FDTD) scheme which computes the scattered waves when the modulated Gaussian pulse is incident. Founded on it, radar cross section(RCS) is observed. Consequently, RCS is decreased by 1~2 dB with DBD plasma. The result is analogous to the RCS measurement in other researches.