Park, Soo-Hoon;Kim, Dong-Il;Song, Young-Man;Yoon, Sang-Gil
Journal of electromagnetic engineering and science
/
제8권2호
/
pp.70-75
/
2008
In this paper, the EM wave absorber was designed and fabricated for countermeasure against EMI from a ceiling of a tollgate in ETC system. We fabricated several samples in different composition ratios of MnZn-ferrite, Carbon, and CPE(Chlorinated Polyethylene). Absorption abilities were simulated in accordance with different thicknesses of the prepared absorbers and changed complex relative permittivity and permeability according to composition ratio. The optimized mixing ratio of MnZn-ferrite, Carbon, and CPE was found as 40:15:45 wt.% by experiments and simulation. Then the EM wave absorber was fabricated and tested using the simulated data. As a result, the developed EM wave absorber has the thickness of 3.3 mm and absorption ability was more than 20 dB in the case of normal incidence and more than 11 dB for the incident angle from 15 to 45 degrees at 5.8 GHz. Therefore, it was confirmed that the newly developed absorber can be used for ETC system.
Journal of electromagnetic engineering and science
/
제15권3호
/
pp.181-184
/
2015
Evaluation of radiating radiofrequency fields from hand-held and body-mounted wireless communication devices to human bodies are conducted by measuring the specific absorption rate (SAR). The uncertainty of system validation and probe calibration in SAR measurement depend on the variation of RF power used for the validation and calibration. RF input power for system validation or probe calibration is controlled manually during the test process of the existing systems in the laboratories. Consequently, a long time is required to reach the stable power needed for testing that will cause less uncertainty. The standard uncertainty due to this power drift is typically 2.89%, which can be obtained by applying IEC 62209 in a normal operating condition. The principle of the Automatic Input Power Level Control System (AIPLC), which controls the equipment by a program that maintains a stable input power level, is suggested in this paper. The power drift is reduced to less than ${\pm}1.16dB$ by AIPLC, which reduces the standard uncertainty of power drift to 0.67%.
835 MHz에서 동작하는 셀룰라 휴대폰에 의한 인체 두부내의 1 g 및 10 g 평균 비홉수율(specific absorption rate, SAR)을 해석한다. 사용되는 수치방법은 총 전자기장 유한차분 시간영역(finite-difference time-domain, FDTD) 기법이다. 전화기는 도체박스, 플라스틱 케이스 그리고 모노폴 안테나와 나선형 안테나 로 구성된 whip 안테나로 모의되었다. 공간 정밀도 3 mm의 이산적 인체두부 모델은 MRI(Magnetic Resonance Imaging), CT(computerized tomography) 그리고 해부학적 이미지에 기초한 것이다 안테나를 뽑은 전화기와 접은 전화기에 대한 근역장 및 원역장 복사 패턴이 분석되었다. SAR 평가를 위한 재현성 있는 기법을 제공하기 위해 조직내의 1 g 또는 10 g의 질량을 갖는 체적을 취하는 두 가지 방법을 제안하고 비교 한다.
최근 DSRC, 협대역 통신 방식을 이용하여 고속도로 톨게이트에 Hi-pass(차량의 무정차 자동 요금 징수)를 운용하고 있지만, 전파의 다중 반사로 인한 전파 간섭이 발생하여 시스템의 오류 및 사고가 발생하고 있다. 이러한 문제들은 전파 흡수체를 사용하여 해결할 수 있다. 본 논문은 전파 흡수 재료인 비정질 재료와 지지재인 CPE를 배합하여 최적의 조성비를 찾고 DSRC용 전파 흡수체를 개발하는 연구를 하였다. 그 결과, 조성비 비정질 재료 :CPE=45:55 wt.%, 두께 2.65 mm인 전파 흡수체가 5.8 GHz에서 40 dB 이상의 흡수능이 얻어지도록 개발하였다.
본 논문에서 Sendust, Mn-Zn, Ni-Zn, Ba, Sr Ferrite를 사용하여 페인트형 흡수체를 제작하였다. 지지재로서는 enamel, epoxy, urethane 페인트들을 사용하여 각각 흡수능을 측정하였다. 그리고 $Al(OH)_3$으로 코팅한 흡수체의 대역폭은 코팅을 하지 않은 것보다 더 넓어지는 것을 알 수 있다. 또 2 mm 두께의 적층형 흡수체는 X-band에서 대략 20 dB의 흡수능을 보여준다.
비행체를 레이더의 시야에 들어나지 않도록 하기 위한 은신 (stealth) 기술은 일반적으로 비행체 표면에 특수도료를 도포하는 방식을 사용하여 실현하고 있지만 요즈음 플라즈마의 전자기파 흡수 능력을 이용하려는 연구가 활발히 진행되고 있다. 대기압 플라즈마가 은신기술에 응용될 수 있는가 우선 물리적인 타당성을 알아보기 위해 이 논문에서는 대기층에서 비행하는 비행체 표면을 어떤 정도의 플라즈마로 얼마나 덮어야 원하는 은신 기능을 나타낼 수 있는지 판단할 수 있도록 비 자장, 비 균일, 평판 플라즈마 모델을 사용하여 계산한 결과를 제시하고 논의한다.
나일론의 종류에 따른 분쇄형 탄소 섬유/나일론 복합재료의 직류 및 교류 전도도, 그리고 전자기파 차폐 효율을 조사하였다. 탄소 섬유의 함량이 약 7 vol%에서 전도도가 급격하게 증가하는 percolation 전이가 관찰되었다. 나일론 46을 기저 수지로 하였을 경우 더욱 높은 전기 전도도를 나타냈으며, 계면 결합제의 적용 여부에 따라 전도도의 차이가 발생하였다. 온도증가에 따라 전도도가 증가하는 negative temperature coefficient 현상을 나타냈으며, percolation 전후의 탄소 섬유 함량에서의 주파수에 따른 전도기구를 완화와 공진 현상으로 각각 달리 설명할 수 있었다. 회로망 분석기를 통하여 측정한 전자기파 차폐 효율은 전도도 및 탄소 섬유의 함량에 따라 증가하였으며, 높은 전도도 영역에서의 전자기파 차폐 효율은 반사에 의한 차폐가 지배적이었다.
In this paper, we studied the magnetic composite sheets for electromagnetic wave noise absorber of quasi-microwave band by using soft magnetic FeSiCr and Fe50Ni flakes with the thickness of about $1{\mu}m$ and polymer. The magnetic hysteresis curve including saturation magnetization and residual magnetization and the complex permeability characteristics of the composite sheets were investigated to clarify the mixing effect on electromagnetic wave absorption properties. The saturation magnetization was decreased about 10% while the residual magnetization was increased about 15% and the real parts of complex permeability at below 500 MHz were increased 0.6~4 while those values at above 500 MHz were decreased 0.4~2.5 according to the change of contents of FeSiCr and Fe50Ni powders. As a result, the reflection loss can be moved to the lower frequency from 2~3 GHz to 1~1.5 GHz as the contents of Fe50Ni flaky powder into FeSiCr flaky powder was increased up to 50%.
레이더 혹은 전자-통신장비에서 방출되는 전자파의 흡수/차폐는 군사적인 목적뿐만 아니라 상업적 목적으로도 매우 중요하다. 효과적인 전자기파 흡수체를 설계하기 위해서는 흡수체에 사용되는 재료의 대상 주파수 대역에서의 전자기적 성질을 정확히 알아야 하며, 손실재의 함량에 따른 정확한 전자기물성 예측이 가능해야 한다 본 연구에서는 전도성 카본 블랙 나노 입자를 함유하는 폴리에스터 복합재료의 유전성질을 자유공간 기법을 이용하여 X-Band 주파수 대역에 걸쳐 측정하고 카본 블랙의 함량에 따라 정량적으로 분석하였으며, 임의의 카본 블랙 함량을 갖는 고분자 수지의 유전 물성을 주파수에 따라 예측할 수 있는 방법을 제시하고 검증하였다.
페라이트는 높은 자기적 손실을 이용하여 전자파 흡수체로 사용하고 있다. 전자파 흡수체는 미세조직이 균일하고 미세할수록 흡수특성이 향상된다. 유기산염 열분해법으로 합성한 분말을 사용하여 Cu-Ni-Zn 페라이트를 제조하였다. 복소유전율과 복소투자율은 밀도가 높고, 입자의 크기가 미세할수록 상승하였다. 페라이트의 정합두께는 소결온도가 높을수록 얇아졌다. Cu-Ni-Zn 페라이트의 전자파 흡수능은 정합두께가 6.75 mm 일 때 160 MHz 부터 640 MHz 까지의 주파수에서 20dB 이상의 값이엿다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.