• Journal of the Korean Chemical Society
• /
• v.50 no.6
• /
• pp.454-463
• /
• 2006

refractory organic compounds in aqueous solution are not readily removed by the existing conventional wastewater treatment process. In recent years, the sonolysis and electrochemical oxidation process had been shown to be promising for wastewater treatment due to the effectiveness and easiness in operation. This study was performed to investigate the characteristics of sonolytic and electrolytic decomposition as the basic data for development of the wastewater treatment process. Trichloroethylene(TCE) and 2,4- dichlorophenol(2,4-DCP) were used as the samples, and their destruction efficiency were measured with various operating parameters, such as initial solution concentration, initial solution pH, reaction temperature, sonic power and current density. Also, the decomposition mechanism conformed indirectly with the effect of NaHCO3 as a radical scavenger on the decomposition reaction. Thermal decompositon reaction is predominant for TCE but thermal and radical decompositon reactions were dominant for 2,4-DCP. Results showed that the destruction efficiencies of all samples were above 65% within 120 minutes by sonolysis and electrolysis at the same time, and were increased with increasing initial concentration, sonic power and current density. Destruction efficiency of TCE was high in the acidic solution, but 2,4-DCP showed high destruction efficiency in basic solution.

• Korean Journal of Organic Agriculture
• /
• v.15 no.4
• /
• pp.425-435
• /
• 2007

This study was conducted to investigate the effect of different ratios of rice straw to swine manure as an earthworm feed on the change of physico-chemical characteristics and earthworm viability during composting, and further to provide the basic information for an efficient vermicomposting using the manure of livestock. Experimental earthworm used in this study was Eisenia foetida and the ratio of swine manure and rice straw was determined to 100:0(SM), 90:10(SRS 10), 80:20(SRS20), 70:30(SRS30) and 60:40(SRS40) on the basis of volume. The results are summarized as follows. Earthworm appeared after 8 week of aging period, and it was possible for the earthworm to survive in all the treatments. C/N ratio was significantly higher (P<0.05) in the treatments of rice straw mixture (SRS30 and SRS40) than swine manure alone (SM treatment). Appropriate C/N ratio for earthworm survival was the range of 10.43 to 11.16. During the period of aging, pH value and electrolytic conductivity (EC) were the highest in the treatment of swine manure alone. However, as the inclusion of rice straw was increased, pH value and EC showed a decreasing tendency. Appropriate pH value and EC for earthworm survival were 7.7 to 7.8, and 2.72 to 4.59mS/cm, respectively. The results from this study indicated that mixing swine manure with rice straw more improved more physico-chemical environment for earthworm growth in comparison with swine manure alone, and rice straw showed the sufficient possibility as a bulking agent for an efficient vermicomposting of swine manure.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.32 no.4
• /
• pp.381-392
• /
• 2022

Objectives: Objective of this study is to review briefly exposure characteristics, monitoring instruments and threshold limit values for extremely low frequency-magnetic field (ELF-MF) methods. This study was undertaken through brief literature review. We performed a literature search in PubMed to identify ELF-MF studies conducted in workplaces. Initial search keywords such as 'extremely low frequency-magnetic field (ELF-MF)' and 'electromagnetic fields (EMF)' combined or singly. We limited our review to occupational rather than general nonworkplace environmental exposures. Methods: The contents we reviewed: key industry and occupations generating ELF-MF, several direct-reading instruments monitoring ELF-MF and threshold limit values (TLV) preventing health effects may be caused by the exposure to ELF-MF. Results: The industries related to the generation and supply of electricity, electrolytic installations, welding, and induction heating and more were regarded as high ELF-MF exposure industries. All jobs handling or employed performed in power cable lines, electrical wiring, and electrical equipment are found to be exposed to ELF-MF. Threshold or ceiling limit, 1,000 µT, is established to prevent acute effects of exposure to low-frequency EMFs on the nervous system: the direct stimulation of nerve and muscle tissues and the induction of retinal phosphenes. The International Agency for Research on Cancer (IARC) has classified ELF-MF as possibly carcinogenic to humans chiefly based on epidemiological studies on childhood leukemia. However, a causal relationship between magnetic fields and several types of cancer including childhood leukemia has not been established nor has any other long-term effects. Risk management using precautionary measures, has been initiated by the US and EU to prevent chronic health effects related to ELF-MF exposure in workplaces. Conclusion: This study recommends the implementation of various measures such as theestablishment of occupational exposure limit values for ELF-MF and precautionary principle to prevent potential chronic occupational health effects may be caused by ELF-MF in Korea.

• Composites Research
• /
• v.36 no.1
• /
• pp.37-41
• /
• 2023

The treated water inside the ballast electrolytic cell creates a highly alkaline atmosphere due to hydroxide generated at the DSA(Dimension Stable Anode) electrode during electrolysis. In this study, a composite material that can replace the weakness of the PE-coated steel pipe used in the existing ballast pipe was prepared. The test samples are BRE(Basalt fiber reinforced epoxy), BRP(Basalt fiber reinforced unsaturated polyester), GRE(Glass fiber reinforced epoxy), and GRP(Glass fiber reinforced unsaturated polyester). And then it was immersed in NaOH for 720 hours. The friction test of each specimen was conducted. The Friction coefficient analysis according to material friction depth and interfacial adhesion behavior between resin and fiber were analyzed. As a result, the mechanism of interfacial separation between resin and fiber could be analyzed. In the case of the unsaturated polyester resin with low interfacial bonding strength the longer the immersion time in the alkaline solution, the faster the internal deterioration caused by the deterioration that started from the surface, resulting in a decrease in the friction coefficient. It is hoped that this study will help to understand the degradation behavior of composite materials immersed in various chemical solutions such as NaOH, acid, and sodium hypochlorite in the future.

• Journal of the Korean Electrochemical Society
• /
• v.6 no.2
• /
• pp.145-152
• /
• 2003

Capacitance of a hybrid capacitor that has characteristics of both electrolyte capacitor and supercapacitor is determined by anode surface covered with oxide layer. In this study, optimal condition processes for anode to fabricate a high voltage hybrid capacitor was investigated. We mixed aluminum powder having mean particle size of $40{\mu}m$ with NaCl powders at weight ratio of 4 : 1 and prepared a disk type electrode after annealing at various temperature. After dissolving NaCl in $50^{\circ}C$ distilled water, heat treatment, eletropolishing, chemical treatment, and the first and the second etching of Al disk were conducted. In each process, capacitances and resistances of the disk measured by ac-impedance analyzer were compared to find its optimum treatment condition. Also, the surface morphology of treated disks were observed and compared by SEM. After the second etching, the Al disk was anodized at 365V to make an anode of hybrid supercapacitor that can be operated at 300V, Capacitance and resistance of the anodized Al disk electrode was compared with those of commercialized conventional aluminum electrolytic capacitor at different frequencies.

• Resources Recycling
• /
• v.27 no.5
• /
• pp.14-22
• /
• 2018

In this study, scarp of PCB containing copper and precious metals was manufactured as an anode, and electrorefining experiments were conducted on change of $H_2SO_4$ concentration and current density. Through electrolytic refining experiments, the concentration of Cu and slime recovered from each electrode was analyzed, element behavior was confirmed, and current efficiency was also calculated. As the $H_2SO_4$ concentration was increased, the current efficiency and the purity of Cu decreased, but the precious metals in the anode slime were maximally concentrated with 2.0 M $H_2SO_4$. In addition, as the current density was increased, the current efficiency decreased and the purity of Cu showed a tendency to increase, and the precious metals in the anode slime were maximally concentrated with $300A/m^2$. As a result of the pilot scale experiments, the Au content was 8,705 mg/kg, the Ag content was 35,092 mg/kg in the anode slime. As compared with the initial content, Au was concentrated 16 times and Ag concentrated 14 times.

• The Korean Journal of Zoology
• /
• v.26 no.4
• /
• pp.253-270
• /
• 1983

Electron microscopic degeneration studies were carried out on the rat's interpeduncular nucleus following lesion on both habenular nuclei to clarify the morphological nature of their presynaptic endings involved in the habenulo-interpeduncular pathway. Two distinct types of interpeduncular neurons were observed: 30% of large neurons and 70% of small ones. Four types of boutons with many characteristics could be differentiated; small spherical vesicle-containing boutons (40%), large spherical vesicle-containing boutons (18%), pleomorphic vesicle-containing boutons (33%), and elongated vesicle-containg boutons (9%). Vesicle containing dendrites were observed as dendro-dendritic synapses and axo-axonal synapses were also found, though rarely. Two to four days after the lesion on both habenular nuclei, the small spherical vesicle-containing boutons were found almost exclusively in the process of degeneration, while the other types were entirely free of degeneration. Therefore, it is inferred that habenural neurons terminate in the interpeduncular nucleus as small spherical vesicle-containing boutons. The neuronal origin of the other bouton types is discussed.

• Korean Chemical Engineering Research
• /
• v.45 no.5
• /
• pp.433-441
• /
• 2007

This work investigated the stability of a Sn-modified Pt electrode, which was used for reduction of nitrate, fabricated by an adsorption or electro-deposition of Sn on Pt. In order to find the causes for instability of the electrode, the effects of the solutions in which the electrode was used and the potential applied to the electrode on the electrochemical and metallurgical behaviors of Sn on Pt were studied. The Sn of freshly- prepared modified-Sn Pt electrode existed as Sn hydroxide form, which brought about an easy loss of the electro-activity of the electrode even staying in water, especially in acid solution. When the Sn-modified Pt electrode was used for the reduction of nitrate, the electro-activity of the electrode was affected depending on the potential applied to the electrode. When a more negative potential than the redox equilibrium potential between $Sn(OH)_2$ and Sn was applied to the electrode, the Sn hydroxide was converted to Sn that could diffused into Pt, which leaded to the loss of electro-activity of the electrode as well. The solid diffusion of Sn increased linearly with the applied potential. The Sn-electrodeposited Pt electrode which had more Sn on the electrode was more favorable to maintaining the integrity of the electrode during the reduction of nitrate than the Sn-adsorbed Pt electrode prepared in the under-potential deposition way.

• Korean Chemical Engineering Research
• /
• v.51 no.6
• /
• pp.700-708
• /
• 2013

Pyroprocessing has been developed for the purpose of resolving the current spent nuclear fuel management issue and enhancing the recycle of valuable resources. Pyroprocessing has been developed with the dry technologies which are performed under high temperature conditions excluding any aqueous processes. Pyro-processes which are based on the electrochemical principles require pretreatment processes and a voloxidation process is considered as a pretreatment step for an electrolytic reduction process. Various kinds of gas conditions are applicable to the voloxidation process and the understanding of Cs behavior during the process is of importance for the analyses of waste characteristics and heat load on the overall pyroprocessing. In this study, the changes of chemical compounds with the gas conditions were calculated by analyzing gas-solid reaction behavior based on the chemical equilibria on a Cs-Te-O system. $Cs_2TeO_3$ and $Cs_2TeO_4$ were selected after a Tpp diagram analysis and it was confirmed that they are relatively stable under oxidizing atmospheres while it was shown that Cs and Te would be removed by volatilization under reducing atmosphere at a high temperature. This work provided basic data for predicting Cs behavior during the voloxidation process at which compounds are chemically distributed as the first stage in the pyroprocessing and it is expected that the results would be used for setting up material balances and related purposes.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.83-83
• /
• 2017

생체재료의 표면은 이식과 동시에 생체계면의 역할을 하게 되어, 일련의 생물학적 반응이 시작되고 진행되는 중요한 장소가 된다. 초기에 생체계면에서 일어나는 단백질 흡착이나 염증반응을 비롯한 생물학적 반응들은 궁극적으로 임플란트의 성패를 좌우할 만큼 중요하다. 골융합을 개선하기 위한 다른 방법으로 생체불활성의 타이타늄 (Ti)과 골조직의 능동적인 반응을 이루기 위해 생체활성 표면을 부여함으로서 계면에서의 골형성 반응을 증진시키는 방법이 이용된다. 생체불활성의 Ti과 Ti합금은 골조직과 직접적인 결합을 이루지 못하므로, 골조직과의 반응을 향상하기 위해 여러 종류의 생체활성 재료를 코팅하는 방법이 연구되어 왔고, 이 중 생체의 변화와 가장 유사한 하이드록시아파타이트 코팅이 가장 대중적인 방법으로 사용되었으며 이는 초기 골형성을 촉진하는 것으로 알려졌다. 치과용 임플란트의 표면형상과 화학조성이 골 융합에 영향을 미치는 가장 중요한 인자이므로 최근의 연구동향은 이들 두 가지 표면특성을 결합함으로서 결과적으로 최적의 골세포반응을 유도하고, 골융합 후 골조직과의 micromechanical interlocking에 의해 임플란트의 안정성에 중요한 역할을 하는 마이크론 단위의 표면조도와 표면 구조를 유지하면서, 부가적으로 골 조직 반응을 능동적으로 개선할 수 있는 생체활성 성분을 부여하여 골 융합에 상승효과를 이루기 위한 표면처리법에 관해 많은 연구가 요구되어지고 있다. 따라서 골을 구하는 원소인 망간과 실리콘으로 치환된 하이드록시아파타이트를 플라즈마 전해 산화법으로 코팅하여 세포와 잘 결합할 수 있는 표면을 제공함으로써 골 융합과 치유기간을 단축시킬 수 있을 것으로 사료된다. 실험방법은 시편은 치과 임플란트 제작 합금인 Ti-6Al-4V ELI disk (grade 5, Timet Co., USA; diameter, 10 mm, thickness, 3 mm)이며, calcium acetate monohydrate, calcium glycerophosphate, manganese(II) acetate tetrahydrate, sodium metasilicate을 설계조건에 따라 혼합 제조된 전해질 용액을 이용하여 플라즈마 전해 산화법으로 표면 코팅을 실시하였다. 각 시편의 플라즈마 전해시 전압은 280V로 인가하였고, 전류밀도는 70mA로 정전류를 공급하여 해당 인가전압 도달 후 3분 동안 정전압 방식을 유지하였다. 코팅된 피막 표면을 주사전자현미경과 X-선 회절분석을 통하여 미세구조 및 결정상을 관찰하였다. 또한 코팅된 표면의 생체활성 평가는 정량적으로 평가하기 위해 동전위시험과 AC 임피던스를 통하여 시행하였다. 분극거동을 확인하기 위해 potentiostat (Model PARSTAT 2273, EG&G, USA)을 이용하여 구강 내 환경과 유사한 $36.5{\pm}1^{\circ}C$의 0.9 wt.% NaCl에서 실시하였다. 전기화학적 부식 거동은 potentiodynamic 방법으로 조사하였고 인가전위는 -1500 mV에서 2000 mV까지 분당 1.67 mV/min 의 주사속도로 인가하여 시험을 수행하였다. 임피던스 측정은 potentiostat (Model PARSTAT 2273, EG&G, USA)을 이용하였으며, 측정에 사용한 주파수 영역은 10mHz ~ 100kHz 까지의 범위로 하여 조사하였고 ZSimWin(Princeton applied Research, USA) 소프트웨어를 사용하여 용액의 저항, 분극 저항 값을 산출하였다. 망간의 함량이 증가할수록 불규칙한 기공을 보였으며, 실리콘은 $TiO_2$ 산화막 형성을 저해하는 경향을 확인할 수 있었다. 단독으로 표면을 처리한 경우보다 두 가지 원소를 이용해 복합 표면처리를 시행한 경우가 내식성이 좋아 임플란트과의 골 유착에 긍정적인 영향을 미칠 것으로 사료된다.