• Korean Chemical Engineering Research
• /
• 제51권3호
• /
• pp.330-334
• /
• 2013

실크 견직물 표면에 poly(vinylidene fluoride-co-hexafluoropropylene) (PVdF-HFP)와 실리카 나노입자의 혼합물을 코팅한 분리막을 제조하고 분리막에 전해액을 함침시켜 리튬이온전지용 분리막 겸 전해질로 사용하기 위한 특성이 조사되었다. 코팅막의 제조 시에는 전해액이 침투할 수 있는 미세다공의 형성을 심화시키기 위해 dibutylphthalate (DBP) 가소제의 함량을 변화시키면서 코팅된 분리막의 이온전도도, 함습율, 전기화학적 안정성 등을 조사하였고, 이를 리튬 이온전지에 탑재하여 여러 전류속도에 대한 충방전 특성도 함께 측정하였다. 결과적으로 실리카가 첨가되고 DBP를 40~50 wt% 사용하여 코팅된 실크 분리막이 가장 우수한 분리막 특성 및 고율 충방전 특성을 나타내었다. 이는 (i) 실크 견직물의 우수한 내구성과 내열성 이외에 (ii) DBP에 의한 미세다공 형성, (iii) 실리카에 의한 함습율 향상 등에 의해 코팅막의 표면적 및 코팅된 분리막의 이온전도도가 크게 향상되었기 때문이다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2004년도 첨단 분리막 연구동향
• /
• pp.13-35
• /
• 2004

Metal Complexes in Macromolecules Applications of Polymer Electrolyte Membranes Facilitated Transport in Solid State Roles of Electrolytes in Solar Cells - Electrolytes :ㆍI- and $I_3$-conductor ㆍelectron barrier or hole conductor ㆍelectrochemical redox reaction media ㆍinterfacial contactor for dye, $TiO_2$ and electrode ㆍmechanical separator (omitted)

• 기술사
• /
• 제15권3호
• /
• pp.12-18
• /
• 1982

단추형 제 2신화은전지의 고주파형 방전용량의 변화를 음극의 구조, 합제배합, 음극 소제의 모양, 격리막, 전해액농도와 연결지어 조사하였다.

• Design & Manufacturing
• /
• 제11권3호
• /
• pp.51-55
• /
• 2017

Micro fuel cells have high reliability and long usage time. Among them, PEMFC (polymer Electrolyte Membrane Fuel Cell) is suitable as a portable power source because it is easy to fix electrolyte and simple structure. The bipolar plate, a key component of the fuel cell, is produced by cutting. In the case of micro fuel cell separator, burr is very small and the flow channel size in the separator is very small. Therefore, it is difficult to remove burrs in the usual way such as a brushing or ultra-sonic method. Therefore, this study proposed electrolytic polishing process and analyzed the characteristics of each condition by introducing the concept of roughness reduction rate. In addition, the ultrasonic process was added to analyze the effect of ultrasonic addition.

• Journal of Electrochemical Science and Technology
• /
• 제14권3호
• /
• pp.272-282
• /
• 2023

Ni-rich layered oxides cathode has recently gained attention as an advanced cathode material due to their applicable energy density. However, as the Ni component in the layered site is increased, the high reactivity of Ni⁴⁺ results in parasitic reaction associated with decomposing electrolyte, which leads to a rapid decreasing the lifespan of the cell. The electrolyte additive triallyl borate (TAB) improves interfacial stability, leading to a stable cathode-electrolyte interphase (CEI) layer on the LNCM83 cathode. A multi-functionalized TAB additive can produce a uniformly distributed CEI layer via electrochemical oxidation, which implies an increase in long-term cycling performance. After 100 cycles at elevated temperature, the cell tested by 0.75 TAB retained 88.3% of its retention ratio, whereas the cell performed by TAB-free electrolyte retained 64.1% of its retention. Once the TAB additive formed CEI layers on the LNCM83 cathode, it inhibited the decomposition of carbonate-based solvents species in addition to the dissolution of transition metal components from the cathode. The addition of TAB to LNCM83 cathode material is believed to be a promising way to increase the electrochemical performance.

• 한국표면공학회지
• /
• 제44권5호
• /
• pp.173-178
• /
• 2011

Separator of stack in polymer electrolyte membrane fuel cell (PEMFC) is high cost and heavy. If we make it low cost and lighter, it will have a great ripple. In this study, low carbon steel is used as base metal of separator because the cost of low carbon steel is very cheaper commercial metal material than stainless steels, which is widely used as separator. Low carbon steel has not a good corrosion resistance. In order to improve the corrosion resistance and electrolytic conductivity, low carbon steel needs to be surface treated. We made Chromium electroplated layer of $5{\mu}m$, $10{\mu}m$ thickness on the surface of low carbon steel and it was nitrided for 2 hours at $1000^{\circ}C$ in a furnace with 100 torr nitrogen gas pressure. Cross-sectional and surface microstructures of surface treated low carbon steel are investigated using SEM. And crystal structures are investigated by XRD. Interfacial contact resistance and corrosion tests were considered to simulate the internal operating conditions of PEMFC stack. The corrosion test was performed in 0.1 N $H_2SO_4$ + 2 ppm $F^-$ solution at $80^{\circ}C$. Throughout this research, we try to know that low carbon steel can be replaced stainless steel in separator of PEMFC.

• Korean Chemical Engineering Research
• /
• 제55권4호
• /
• pp.467-472
• /
• 2017

Poly(acrylonitrile) (PAN) 부직포 분리막 상에 poly(ethylene oxide) (PEO), poly(vinyl alcohol) (PVA), potassium poly(acrylate) (PAAK)의 각 고분자와 6 M KOH로 조성된 전해질을 코팅하고 이를 활성탄 수퍼커패시터에 적용하여 고분자 종류에 따른 전기화학적 특성을 조사하였다. 특징적으로 PEO와 PVA는 그 고분자 사슬의 자체 구조로 인해 알칼리 전해액 성분 (KOH)과의 상호작용이 활성적이지 않은데 반하여, PAAK는 3 wt% 함량만으로도 주사슬 및 곁사슬에 분포하는 $COO^-K^+$ 이온쌍과 전해액 내 해리되어 있는 $K^+$ 및 $OH^-$ 이온들과의 상호작용이 활성적으로 진행되어 하이드로겔을 형성하며, 이것이 이온전도 및 수퍼커패시터의 전기화학적 특성에 큰 영향을 주었다. 결과적으로 PAAK-KOH 전해질/PAN 분리막으로 포함한 활성탄 수퍼커패시터가 가장 우수한 축전용량 ($100mVs^{-1}$에서 $46.8Fg^{-1}$)을 나타내었다.

• 한국재료학회지
• /
• 제8권6호
• /
• pp.571-576
• /
• 1998

본 연구에서는 용융탄산염 연료전지용 분리판으로서 오스테나이트계 스테인레스강 중, 310S를 사용하여 용융염 전해질 및 양극측 분위기에서 부식거동, 부식생성물의 형성과정 및 기구에 관한 고찰을 실시하였다. 분리판의 부식 진행과정은 부식반응 이후 안정 부식생성물이 형성되기까지 빠른 부식이 진행되는 부식생성물 형성단계와 안정 부식생성물 형성 후 보호파괴가 일어나기 까지의 부식 억제단계, 그리고 보호파괴 이후 부식이 다시 증가되는 부식 진행단계의 3단계 과정을 경유하며 진행하였다. 분리판 내 원소들의 농도분포는 부식생성물 형성영역에서는 Fe가, 부식 방어영역에서는 Cr이, 그리고 Ni은 Cr 고갈영역과 기지 안쪽에서 높게 형성되었다. 또한 양극측에서 분리판은 전해질의 이온화에 의한 부식이 주된 부식기구였으며, 최종 부식생성물은 $LiFeO_2$와 $LiCrO_2$였다.

• 전기화학회지
• /
• 제6권3호
• /
• pp.174-177
• /
• 2003

Electric double-layer capacitors based on charge storage at the interface between a high surface area activated carbon electrode and an electrolyte solution are characterized by their long cycle-life and high power density in comparison with batteries. However, energy density of electric double-layer capacitors obtained at present is about 6 Wh/kg at a power density of 500W/kg which is smaller as compared with that of batteries and limits the wide spread use of the capacitors. Therefore, a new capacitor that shows larger energy density than that of electric double-layer capacitors is proposed. The new capacitor is the hybrid capacitor consisting of activated carbon cathode, carbonaceous anode and an organic electrolyte. Maximum voltage applicable to the cell is over 4.2V that is larger than that of the electric double-layer capacitor. As a result, discharged energy density on the basis of stacked volume of electrode, current collector and separator is more than 18Wh/l at a power density of 500W/l.

• 방사선산업학회지
• /
• 제2권3호
• /
• pp.105-110
• /
• 2008

Poly (VDF-co-HFP)/PEGDMA nanofibrous membranes (NFMs) have been prepared by an electrospinning process. Since electrospun NFMs have a nanoporous structure, they have a potential application for a polymer electrolyte or a separator. Poly (VDF-co-HFP) is a polymer electrolyte binder. In order to improve their mechanical properties, poly (VDF-co-HFP)/PEGDMA NFMs were crosslinked by a gamma-ray irradiation. Then the crosslinked NFMs were characterized through an electrolyte uptake, IR structural analysis, and SEM morphological investigation.