• Journal of Electrochemical Science and Technology
• /
• 제5권2호
• /
• pp.58-64
• /
• 2014

The surface of an ordered mesoporous silica (OMS) was functionalized using 1H,1H,2H,2H-perfluorooctyltrimethoxysilane at $20^{\circ}C$ and $60^{\circ}C$. It was shown that only elevated temperature allows lyophobic properties on the walls of OMS, eventually preventing pore flooding with nonaqueous electrolytes. The functionalized OMSs (OMS-F) were characterized with various techniques: wettability test, $N_2$ sorption measurement, high-resolution transmission electron microscopy (HR-TEM). Cathodes of $10mg/cm^2$ loading were prepared with a commercial Pt/C catalyst and polyvinylidene fluoride (PVDF, 2.5 wt.%) binder using a typical doctor blade method on a commercial gas diffusion layer (GDL) in the presence or in the absence of OMS-F additives. Subsequent discharge-charge curves were taken in a 1M LiTFSI-TEGDME electrolyte at 60oC in pure oxygen atmosphere. It was found that the discharge capacity was significantly affected by OMS-F: 5 wt.% of additive extended discharge capacity by a factor 1.5. On the other hand, a similar OMS material but synthesized at $20^{\circ}C$ did not show lyophobic properties and deteriorated cathode capacity.

• 한국전기전자재료학회논문지
• /
• 제17권9호
• /
• pp.1001-1005
• /
• 2004

Rye-sensitized solar cell (DSSC) is a new class of solar cell, which consists of nanoporous TiO$_2$ electrode, dye-sensitizer, electrolyte, and counter electrode. Such cell is operated in sunlight via the principle of photosynthetic electrochemistry. In order to obtain the good dispersion of nano size TiO$_2$ particles In slurry, the pH of solvent, the sort and quantify of solvent additive and the quantity of surfactant were adjusted. As results, the lower the pH of solvent was the lower the viscosity of the slurry became. The addition of ethylene glycol and propylene glycol to dilute HNO$_3$ brought about the lowering of viscosity and the enhancement of stability in slurry. The addition of surfactant lowered the viscosity of slurry. It was possible to obtain the homogeneous and uniformly dispersed mesoporous TiO$_2$ film using the dilute HNO$_3$ solvent of pH 2 with the addition of ethylene glycol and neutral surfactant. DSSC was assembled with TiO$_2$ electrode and Pt electrode, and its photoelectric property was measured using the monochromatic wavelength in the rangee of 350∼700 nm.

• 한국표면공학회지
• /
• 제23권1호
• /
• pp.16-26
• /
• 1990

The standrd electrolyte for the electrodeposition of chromium were preparwith reagent grade chromic acid(200g/L), sulfuric acid(pH=1.8)and oxalic acalic acid(640g/L)as additive. Carbon content in chromium plating varied about2.0-3.8 wt% with current density and temperatures of the bath. The hardeness of chromium platings incresed with increasing the annealing temperatures and showed maximum value of about Hv 1700 after annealing at$ 700^{\circ}C$for 60min. But, decreased it as annealing at above $700^{\circ}C$. The reason for varing thee hardness of chromium codeposited with carbon gradually foumed chromium carbide(Cr7C3), but that changed to Cr23C6 as annealing temperature at above $^700{\circ}C$. The X-ray diffraction pattern indicated that chromium carbides, such as Cr7C3 or Cr3C2, formed at formed at above $300^{\circ}C$. titanium coating sputtered on the on surface of chromium plating had performed and determined the hardness after annealing at 500, 600, $700^{\circ}C$ for 60min. the maximum hardeness was about Hv 2400 as annealing at $700^{\circ}C$. The titanium carbide formed in layer was identified by X-ray diffraction. It was confirmed that chromium and titanium carbide has effect of increasing the hardness.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.495-498
• /
• 2002

Recently, the advent of electro-active papers (EAPap) actuators has been reported. In this paper, the possibility of the actuators is demonstrated. EAPap is a paper that produces large displacement with small force under an electrical excitation. EAPap is made with a chemically treated paper by constructing thin electrodes on both sides of the paper. When electrical voltage is applied on the electrodes the EAPap produces bending displacement. To improve the bending performance of EAPap, different paper fibers-softwood, hardwood, bacteria cellulose, cellophane, carbon mixture paper, electrolyte containing paper and Korean traditional paper, in conjunction with additive chemicals were tested. Two attempts were made to construct the electrodes: the direct use of aluminum foil and the gold sputtering technique. It was found that a cellophane paper exhibits a remarkable bending performance. When 2MV/m of excitation voltage was applied on the paper actuator, more than 3mm of tip displacement was observed out of the 30 mm long paper beam. This is quite low excitation voltage compared to that of other EAPs. The actuation principle of electro-active paper (EAPap) and possible applications are addressed.

• 한국수소및신에너지학회논문집
• /
• 제27권5호
• /
• pp.540-546
• /
• 2016

Besides high-efficient photovoltaics based on silicon, polymers, dye-sensitization and hybrid perovskite materials, biomimetic solar cells inspired by a leaf in nature has also been actively studied. As one example, a hydrogel based photovoltaics (HGPV) is a low-cost, environmentally friendly device and requires easy fabrication process. In this paper, the effect of hydroquinone additive on the performance of the HGPV is discussed. The photocurrent increases ~14 times upon the addition of hydroquinone into the agarose hydrogel medium. The photocurrent increase is maximum at the optimum dye concentration, while the photovoltage is barely affected by the dye concentration. The effect of the agarose content in the hydrogel and the types of dyes on the photocurrent is also investigated. Finally, it is shown that the photovoltaic performance of HGPV with hydroquinone can be drastically improved when $TiO_2$ film is deposited on the anode electrode.

• Bulletin of the Korean Chemical Society
• /
• 제22권7호
• /
• pp.709-715
• /
• 2001

We have been studied photosensitization mechanism's additive effect, of perylene 3,4,9,10-tetracarboxyl-diimide and X-phthalocyanine (charge generation materials), using the photochemical and photoelectrochemical approach. It was found that the photoreceptor on the excited state reacts with metal oxide, which creates the charge transfer on the interface of SnO2/electrolyte. In the electrode (X5P1) made of five X-phthalocyanine and single perylene 3,4,9,10-tetracarboxyldiimide layers, the cathodic photocurrent of X-phthalocyanine in the 400-600 nm region was increased by the addition of perylene 3,4,9,10-tetracarboxyldiimide. The maximum wavelength of fluorescence of perylene 3,4,9,10-tetracarboxyldiimide showed no dependence on the temperature. The addition of 4-dibenzylamino-2-methylbenzaldehyde diphenylhydrazone known as charge transport material was represented as decreasing photocurrent for X-phthalocyanine and perylene 3,4,9,10-tetracarboxyldiimide, respectively. In the electrode (X1P1) made of single X-phthalocyanine and single perylene 3,4,9,10-tetracarboxyldiimide layers, an anodic photocurrent of about 10.5 nA was generated by addition of hydroquinone at 550 nm. And the characteristic of photoinduced discharge was shown to decrease by a factor of 5 and the speed of dark decay was increased by a factor of 1.2.

• 한국결정성장학회지
• /
• 제15권1호
• /
• pp.16-20
• /
• 2005

고체 산화물 연료전지 전해질 재료인 8YSZ(yttria stabilized zirconia)세라믹 소재의 전기 전도도와 기계적 특성을 동시에 향상시키기 위하여 첨가제로서 Al₂O₃를 사용하고, 방전 플라즈마 소결법을 적용하였다. 제조된 소결체는 1200℃의 소결 온도에서 96% 이상의 밀도를 보이며, 1 ㎛ 이하의 균일한 크기의 결정립들로 구성된 미세구조를 보여주고 있다. 첨가된 Al₂O₃는 순수한 8YSZ의 결정립성장을 억제하여 파괴인성 및 굽힘강도 등 기계적 물성을 향상시키고, 또한 결정립 내부 전도도는 일정하게 유지한 채, 결정립계 전도도를 향상시켜 전체 이온 전도도를 증가시킴을 확인하였다. 이는 방전플라즈마 소결법이 비교적 낮은 온도에서 소결이 가능하여 기존의 소결 방법에서 문제시 되었던 8YSZ내로 Al₂O₃가 용해되는 것이 억제 되었을 뿐 아니라, 결정립계에 존재하는 SiO₂가 Al₂O₃와 반응하여 Al/sub 2-x/Si/sub l-y/O/sub 5/상으로 결정화되면서 결정립계 전도도를 향상시킨 결과로 사료된다.

• 전기화학회지
• /
• 제20권2호
• /
• pp.34-40
• /
• 2017

높은 출력의 장점을 가지는 전기이중층 커패시터 (EDLC: electric double layer capacitors)는 이차 전지와 더불어 차세대 에너지 저장장치로서 각광받고 있으나 낮은 에너지 밀도로 인해 그 사용처가 제한적이다. 본 연구에서는 EDLC의 에너지 밀도 향상 방법 중의 하나인 고전압화 구현 시 적합한 전해액을 연구하기 위해 AN (acetonitrile)용매에 $SBP-BF_4$ (spirobipyrrolidinium tetrafluoroborate), $TEA-BF_4$ (tetraethylammonium tetraflouroborate), $EMI-BF_4$ (1-ethyl-3-methylimidazolium tetrafluoroborate)의 세가지 염을 각각 선정하여 다양한 전해액의 조성에 따른 전기화학 특성을 비교 평가하였다. LSV (linear sweep voltammetry)측정에서 1.5M SBP-BF4/AN 전해액은 넓은 전위영역에서 안정함을 보였고, 고전압의 환경 (3.0 V 이상)에서 다른 조합의 전해액들과 비교하여 가장 우수한 전기화학적 성능을 보였다. 또한, 장기적으로 안정적인 성능을 유지하기 위해 리튬이온전지시스템에서 기능성 첨가제 효과가 입증된 TMSP (tris(trimethylsilyl)phosphite) 첨가제를 적용 했을 때 고전압의 환경 (3.3 V)에서 10,000 cycle 후 93%의 높은 용량 유지율을 얻을 수 있었다.

• 한국안전학회지
• /
• 제38권5호
• /
• pp.8-14
• /
• 2023

Lithium ions can induce the thermal runaway phenomenon and lead to reignition due to electrical, mechanical, and environmental factors such as high temperature, smoke generation, explosions, or flames, which is extremely likely to create safety concerns. Therefore, one of the ways to improve the flame retardancy of the electrolyte is to use a flame-retardant additive. Comparing the associated characteristic value of existing substances with the required experimental value, it was found that these values were either considerably different or were not documented. It is vital to know a substance's combustion characteristic values, flash point, explosion limit, and autoignition temperature (AIT) as well as its combustion characteristics before using it. In this research, the flash point and AIT of materials were measured by mixing a highly volatile and flammable substance, diethyl carbonate (DEC), with flame-retardant dimethyl methylphosphonate (DMMP). The flash point of DEC, which is a pure substance, was 29℃, and that for DMMP was 65℃. Further, the lower explosion limit calculated using the measured flash point of DEC was 1.79 Vol.%, while that for DMMP was 0.79 Vol.%. The AIT was 410℃ and 390℃ for DEC and DMMP, respectively. In particular, since the AIT of DMMP has not been discussed in any previous study, it is necessary to ensure safety through experimental values. In this study, the experimental and regression analysis revealed that the average absolute deviation (ADD) for the flash point of the DEC+DMMP DEC+DMMP system is 0.58 sec and that the flash point tends to increase according to changes in the composition employed. It also revealed that the AAD for the AIT of the mixture was 3.17 sec and that the AIT tended to decrease and then increase based on changes in the composition.

• 자원리싸이클링
• /
• 제26권6호
• /
• pp.84-90
• /
• 2017

저품위 동 함유 슬러지로부터 회수된 동 조금속을 황산구리 전해액에서 전해정련을 수행하여 고순도 동을 회수하고자 하였다. 유기첨가제 종류 및 농도에 따른 전해정련동 표면 형상 및 조도를 분석하였을 때, gelatin계 유기첨가제 5 ppm 및 thiol계 유기첨가제 5~10 ppm 혼합 조건에서 가장 우수한 표면 형상을 얻을 수 있었다. 건식환원공정을 통해 회수한 철(Fe), 니켈(Ni), 코발트(Co) 및 주석(Sn) 등의 불순물이 함유된 각 86.635, 94.969 및 99.917 wt.% 순도의 동 조금속을 사용하여 전해정련하였고, 순도 3N~4N급 전해정련동을 얻을 수 있었다. 동 조금속, 전해액, 전해정련동의 불순 원소 농도 및 동 순도 등의 분석을 통해, 순도 99.99 wt.% 이상 전해정련동을 회수할 수 있는 전해정련 공정시간 및 동 조금속 순도를 도출하였다.