• 멤브레인
• /
• 제22권2호
• /
• pp.95-103
• /
• 2012

본 연구에서는 생활오수, 산업폐수, 축산폐수 등에서 발생하는 질산성화합물 및 난분해성 화합물을 효과적으로 처리하기 위해 막분리법과 다공 전극형 전기분해법을 조합한 하 폐수의 고도처리 기술을 제안하였고 제안 시스템의 효율성을 검토하였다. 제안하는 시스템은 활성슬러지 공정, 막분리 공정, 다공 전극형 전기분해공정의 3단계로 구성하였다. 본 연구에서 구성되는 막분리 공정은 부유물질을 제거해줌으로써 전기분해공정의 부하를 최소화할 수 있는 역할을 담당할 수 있게 하여 시스템을 안정하게 운전할 수 있도록 하였다. 전기분해 하이브리드 공정에 있어서는 다공성 전극으로 구성함으로써 비표면적의 확대로 인한 전극의 효율성을 높였다. 아울러 외부전압을 인가함에 따라 처리제의 공급 없이 장치에 유입된 물을 분해시킴으로써 산화 환원 반응을 유도하였다. 즉 중간체로서 수소 자유전자 라디칼과 산소원자 라디칼이 발생되어 난분해성 유기물을 산화 분해하는 역할을 담당하도록 하였다. 이는 전극 내에서 발생하는 중간체를 폐용질의 분해에 사용하기 때문에 친환경적 처리공법이었다. 실험결과들은 제안공정이 활성슬러지공법에 비하여 우수한 공정임을 보여 주었다. SS제거율은 제안공정, 막분리공정, 활성슬러지 단독공정에서 각각 약 100%, 약 100%, 약 90%였고 COD 제거효율은 제안공정 약 92%, 막분리공정 약 84%, 활성슬러지 단독공정 약 75%였으며 T-N의 제거효율은 제안공정 약 88%, 막분리공정 약 67% 활성슬러지 단독공정 약 58%였다. 이결과는 SS의 제거에 있어서 막분리 하이브리드 공정만으로도 부유물질이 충분히 제거됨을 나타내고 있었다. COD의 제거에 있어서 막분리 하이브리드 공정은 SS분의 제거를 통한 COD와 SS이외의 유기물질이 소량제거 되었음을 보였고 전기분해 하이브리드 공정에 있어서는 유기물질의 산화반응을 통한 분해로 높은 제거효율을 보였다. T-N의 제거에 있어서는 막분리 하이브리드 공정은 SS분에 포함된 부분과 소량의 유기물에 포함된 부분이 제거되고 있는 반면 전기분해 공정에 있어서는 유기물질의 산화분해반응으로 인한 높은 제거효율을 나타내고 있었다.

• 유기물자원화
• /
• 제27권4호
• /
• pp.51-59
• /
• 2019

실험실 규모 회분식 미생물전기분해전지 반응기 (유효부피 20 mL)를 이용하여 수소가스 생산 및 식종기간 특성을 조사하였다. 총 6 cycle 동안 0.9 V를 인가하여 식종슬러지 혼합 비율 (혐기성소화 슬러지:50 mM PBS)에 따른 수소생산 및 식종기간을 분석한 결과 혼합비 1:1 반응기에서 9.8-20.9 mL 수소를 생산하였으며, 수소함량은 66.8-79.6%로 가장 높게 나타났다. 식종기간에 있어서는 혼합비 1:1 반응기 기준으로 약 12일 정도부터는 수소생산 및 전류밀도가 증가하는 것으로 나타났다. 또한 혼합비 1:2, 1:3, 1:4 반응기의 경우 cycle (2-6 cycle)에 따라 수소가스 생산량이 3.7-7.1 mL, 농도 5.8-65.8%로 변화하였으며, 혼합비 1:5, 1:6, 1:7 반응기의 수소가스 생산량은 0.5-0.7 mL, 농도 1.8-7.1%로 나타나 최대 혼합비 1:4까지 식종하는 것이 적합할 것으로 판단된다.

• 한국수소및신에너지학회논문집
• /
• 제26권5호
• /
• pp.409-415
• /
• 2015

This study was performed to optimize the integrated anaerobic digestion (AD) and microbial electrolysis cells (MECs) for the enhanced hydrogen production. The optimum operational conditions of integrated AD and MECs were obtained using response surface methodology. The optimum substrate concentration and operational pH were 10 g/L and 6.8, respectively. In the confirm test, 1.43 mol $H_2/mol$ hexose was achieved, which was 2.5 times higher than only AD. After 40 to 60 hour at seeding, the volatile fatty acids (VFAs) in reactor of AD were not changed. However the VFAs of reactor of AD-MECs were reduced by 61.3% (acetate: 76.4%, butyrate: 50.0%, lactate: 55.0%).

• 상하수도학회지
• /
• 제28권4호
• /
• pp.473-478
• /
• 2014

Microalgae is known as one alternative energy source of the fossil fuel with the small size of $5{\sim}50{\mu}m$ and negative charge. Currently, the cost of microalgae recovery process take a large part, about 20 - 30% of total operating cost. Thus, the microalgae recovery method with low cost is needed. In this study, the optimum current for Scenedesmus dimorphus recovery process using electrocoagulation techniques was investigated. Under the electrical current, Al metal in anode electrode is oxidized to oxidation state of $Al^{3+}$. In the cathode electrode, the water electrolysis generated $OH^-$ which combine with $Al^{3+}$ to produce $Al(OH)_3$. This hydroxide acts as a coagulant to harvest microalgae. Before applying in 1.5 L capacity electrocoagulation reactor, Scenedesmus dimorphus was cultured in 20 L cylindrical reactor to concentration of 1 OD. The microalgae recovery efficiency of electrocoagulation reactor was evaluated under different current conditions from 0.1 ~ 0.3 A. The results show that, the fastest and highest recovery efficiency were achieved at the current or 0.3 A, which the highest energy efficiency was achieved at 0.15 A.

• 유기물자원화
• /
• 제29권2호
• /
• pp.31-38
• /
• 2021

본 연구는 미생물전기분해전지를 이용하여 도축부산물의 처리 가능성을 평가하였다. 도축부산물 희석액을 772, 1,222, 1,431 mg COD/L의 농도로 반응조에 주입하였으며 각 유입농도에서 인가전압 변화 (0.3, 0.6, 0.9 V)에 따른 COD 제거 및 메탄가스 발생 특성을 평가하였다. 메탄가스 발생량은 유입 COD 농도 1,431 mg/L와 인가전압 0.9 V 조건에서 최대치를 얻을 수 있었다. 모든 인가전압 조건에서 주입농도가 증가할수록 COD 제거율이 증가하였으며 평균 COD 제거율은 62.3~81.1% 이었다. 돼지 간은 난분해성 성분이 많아 혐기성소화에 적절하지 않은 기질이나 미생물전기분해전지의 생물전기화학반응을 통해 잠재적 메탄 수율의 80%인 129~229 mL/g COD의 높은 수율을 얻을 수 있었던 것으로 판단된다. 향후 반응조 형상 및 운전조건 최적화 등을 통하여 기질의 소화속도와 소화율을 보다 개선할 수 있을 것으로 판단된다.

• 한국물환경학회지
• /
• 제31권2호
• /
• pp.94-102
• /
• 2015

Electro-coagulation experiments were conducted with aluminum (Al) or iron (Fe) electrode in order to determine the optimal electrode material and operation conditions for algae removal. Al electrode showed higher removal rate of algae than Fe electrode because Al flocs have positive surface charges which electrostatically attract algae species having negative surface charges. Removal rate of algae and total phosphorous (T-P) was increased as current density and electrode area increases. It was also found that initial pH with neutral range was optimum for T-P removal by electro-coagulation. Bench-scale continuous flow experiments consisted of electro-coagulation reactor, agitation tank and settling tank were conducted. In electro-coagulation reactor, a large fraction of Al flocs were distributed to scum layer, due to the gas bubbles generated by electrolysis reaction. In agitation tank, most of Al flocs were settled and the optimal mixing intensity was found to be 50 rpm to achieve good settleability. The removal rate of algae was about 90-95%. Additionally, the removal rate of the T-P and COD was observed to be $73.8{\pm}8.0%$ and $75.0{\pm}3.8%$, respectively. Meanwhile, the removal rate of total nitrogen (T-N) was relatively low at only 24%.

• 청정기술
• /
• 제28권2호
• /
• pp.182-192
• /
• 2022

This study provides an overview of the production costs of methane and hydrogen via water electrolysis-based hydrogen production followed by a methanation based methane production technology utilizing CO₂ from external sources. The study shows a comparative way for economic optimization of green methane generation using excess free electricity from renewable sources. The study initially developed the overall process on the Aspen Plus simulation tool. Aspen Plus estimated the capital expenditure for most of the equipment except for the methanation reactor and electrolyzer. The capital expenditure, the operating expenditure and the feed cost were used in a discounted cash flow based economic model for the methane production cost estimation. The study compared different reactor configurations as well. The same model was also used for a hydrogen production cost estimation. The optimized economic model estimated a methane production cost of $11.22/mcf when the plant is operating for 4000 hr/year and electricity is available for zero cost. Furthermore, a hydrogen production cost of $2.45/GJ was obtained. A sensitivity analysis was performed for the methane production cost as the electrolyzer cost varies across different electrolyzer types. A sensitivity study was also performed for the changing electricity cost, the number of operation hours per year and the plant capacity. The estimated levelized cost of methane (LCOM) in this study was less than or comparable with the existing studies available in the literature.

• 한국환경과학회지
• /
• 제17권6호
• /
• pp.581-589
• /
• 2008

This study was carried out to evaluate the effect of water quality of cooling tower on Legionella pneumophila disinfection using Ru/Ti electrode. The influences of parameters such as pH, turbidity, $CaCO_3$ and TOC were investigated using laboratory scale batch reactor. Oxidants such as free Cl, $ClO_2,\;H_2O_2\;and\;O_3$ were measured. The results showed that all of the water quality parameters of cooling tower had deteriorated disinfection of Legionella pneumophila. When the turbidity, $CaCO_3$ and TOC was increased, oxidants which was generated during electrolysis was decreased. pH, free Cl, $ClO_2\;and\;H_2O_2$ concentration were decreased with the increase of pH, whereas $O_3$ concentration was increased with the increase of pH. The order of effect of water quality on the disinfection performance for Legionella pneumophila was turbidity > $CaCO_3$ > TOC > pH. To obtain the safety standard (1000 CFU/L), the simultaneous increase current and NaCl dosage was needed.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.228.2-228.2
• /
• 2010

In this work, the hydrogen production costs of the nuclear energy sources are estimated in the necessary input data on a Korean specific basis. G4-ECONS was appropriately modified to calculate the cost for hydrogen production of HTE process with Very High Temperature nuclear Reactor (VHTR) as a thermal energy source rather than the LUEC (Levelized Unit Electricity Cost). The general ground rules and assumptions follow G4-ECONS. Through a preliminary study of cost estimates, we wished to evaluate the economic potential for hydrogen produced from nuclear energy, and, in addition, to promptly estimate the hydrogen production costs for an updated input data for capital costs. The estimated costs presented in this paper show that hydrogen production by the VHTR could be competitive with current techniques of hydrogen production from fossil fuels if $CO_2$ capture and sequestration is required. Nuclear production of hydrogen would allow large-scale production of hydrogen at economic prices while avoiding the release of $CO_2$. Nuclear production of hydrogen could thus become the enabling technology for the hydrogen economy. The major factors that would affect the cost of hydrogen were also discussed.

• 한국환경보건학회지
• /
• 제34권2호
• /
• pp.175-182
• /
• 2008

This study investigates the optimal conditions for electrogenerated hydrogen peroxide production and the application of the electro-Fenton process using DSA electrodes. The influences of parameters for the hydrogen peroxide generation such as electrode materials, electrolyte concentration, current, pH, air flow rate and electrode distance were investigated using a laboratory scale batch reactor. The relative performance for hydrogen peroxide generation of each of the six electrodes is : Ru-Sn-Ti > Ru-Sn-Sb > Ru > Ir > Pt > Sn-Sb. Optimum NaCl dosage, current and air flow rate were 2.0 g/l, 12.5 A and 2 l/min, respectively. When the pH is low, hydrogen peroxide concentration was high. Electrode distance dos not effect to a hydrogen peroxide generation. A complete color removal was obtained for RhB (200 mg/l) at the 8 min mark of the electro-Fenton process under optimum operation conditions of $Fe^{2+}$ 0.105 g/l and 5.0 A. The electro-Fenton process increased initial reaction and decreased final reaction time. However the effect was not high.