• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.427-430
• /
• 2008

Electroforming is one of the key technologies for the regenerative thrust chamber of the rocket engine. To use nickel electroforming method for the thrust chamber, direct electroforming of nickel on cupper and the welding method between different materials are needed. Minimizing the internal stress is one of the important factor for making thick electroforming,. Also minimizing contamination(ex. Sulfur containing compound) is another important factor for the stability of quality. This paper includes advanced methods for thick nickel electroforming, those of strength test results and EDS/EPMA inspection results. Advanced for electroforming process makes the achievement of Electro-beam welding between Inconel718(Manifold) and Nickel Electroforming. This paper also includes the influence of the electroforming precipitation angle on strength. Thus advanced electroforming improvement processes and the test results make achievement for manufacturing of the regenerative thrust chamber with direct nickel thick electroforming on cupper materials.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.581-582
• /
• 2008

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.1
• /
• pp.15-20
• /
• 2015

I developed a high-quality metal door with a hologram-pattern design using a high-speed electroforming process. In this study, the major processes were master production, conducting grant, nickel-sulfamate acid electroforming, ablation treatment, and final dressing. The processing system was provided with a nickel sulfamate pole, and a rotary-pole PP-plating jig in a circular tank. This approach could reduce defects and errors, as much as possible, by its use of a hologram pattern to create the master of a metal door. The thin-sheet metal-creation process for the door built-in metal pattern using electroforming with hologram was successful.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.10a
• /
• pp.188-191
• /
• 2004

Electroforming is a process that employs technology similar to that used for electroplating but which is used for manufacturing metallic articles, rather than as a means of producing surface coatings. Electroforming provides a cost-effective means of producing alloys and fully dense nanocrystalline metals as foils, sheets and complex shapes. It was able to make Fe-Ni foil with $5{\mu}m$ thickness by electroforming. Electroformed Fe-Ni alloy was nanocrystalline and the yield strength was in the range $2000{\sim}2800\;MPa$. The magnetic permeability at high frequency of electroformed Fe-Ni foil was higher than that of thicker foils.

• 연구논문집
• /
• s.33
• /
• pp.183-190
• /
• 2003

Today, We have used many electronic equipment such as computer, TV, cellular phone and so on. These equipment radiate a large amount of EMI(Electromagnetic interference) which is occurred trouble of airplane, medical equipment, communicate equipment, and especially, human health. So, Ni mesh fabrication for EMI shielding by continuous electroforming process was investigated. Continuous electroforming apparatus was made by means of rotating cathode drum. And We investigated the characteristics of two types of Ni electroforming solution. One was made by laboratory and the other was produced by M cooperation. The grain size increased with increasing current density and bath temperature, and decreasing rotating speed of cathode drum. EDX results indicate that the Ni mesh electroformed by the KIMM solution is composed of pure Ni. But the Ni mesh electroformed by the M cooperation solution has Ni and S element. The incorporation of S element in the Ni mesh has a profoundly effect on mechanical properties such as hardness, internal stress and so on.

• Transactions of Materials Processing
• /
• v.13 no.3
• /
• pp.279-284
• /
• 2004

Electroforming is the highly specialized use of electrodeposition for the manufacture of metal parts and basically a specialized form of electroplating. So, we can apply electrochemical system analysis for electroforming process. Electrochemical systems are concerned with the interplay between electricity and chemistry, namely the measurements of electrical quantities, such as current density, potential, and charge, and their relationship to chemical parameters. This paper based on the basic equations of electrics and electrochemical kinetics, was employed for a theoretical explanation of the current density distribution on electroforming process. We calculated current density distribution and potential distribution on cathode. Also, calculated current density distribution of vertical direction. It was shown that current density is related with distance of between anode and cathode and mass transfer process.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.2
• /
• pp.193-201
• /
• 2008

In edentulous mandible, implant supported overdenture was considered as a first treatment option. In case of a implant supported telescopic overdenture, sufficient inter-arch space needs for arrangement of artificial teeth and attachment. Passive fit of the implant prosthesis is important factor for preventing mechanical failure. Gold Electroforming System is particularly useful to achieve a passive fit of telescopic attachment and results in precision marginal fit and the small thickness of the coping provides optimal space for narrow inter-arch space. This article presents that application of Gold Electroforming System can provide excellent esthetics and function on four-implant supported telescopic overdenture.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.225-226
• /
• 2010

• Transactions of Materials Processing
• /
• v.20 no.2
• /
• pp.93-98
• /
• 2011

Electroforming is a kind of metal molding technology. After gilding on the possession object(conductivity, nonconductivity) separate it with possession object and produce a part or duplicate. This process has an excellent ability of duplicating detailed figure. To simplify the manufacturing process of a rotary screen, this study was adopted electroforming technology and produced silicon rubber mandrel. Furthermore, to indicate the optimal condition for the acquisition of high-qualified rotary screen product, the experiment was executed with pH, time, sulfamate nickel solution according to density which were the main factors to decide the condition, then compared it with the product made by original "S" company in Holland. As a result, the figure of hole was more obvious and correct. Also the open size increased by more than 2-3%.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.314-317
• /
• 2006

Electroformed part is widely used in modem manufacturing industries, especially semi-conductor division. It is basically a specialized form of electroplating. So, it has very similar parameters with electroplating. The object of this study is development of the fine metal mask by electroforming process. In this paper considered two parameters. The first is relationship of UV exposure and soft baking time. The other one is thickness uniformity of electroformed parts by distance of between electrodes. This paper presents the fabrication method of fine metal mask by electroforming process.