• 제목/요약/키워드: Electrodeless

검색결과 175건 처리시간 0.026초

Optical Properties of Inductively Coupled Plasma with Ar Gas Pressure and RF Power (13.56MHz) (Ar 가스압력과 RF 전력변화 (13.56MHz)에 따른 유도결합형 플라즈마의 광학적 특성)

  • Her, In-Sung;Kim, Kwang-Soo;Choi, Yong-Sung;Lee, Jong-Chan;Park, Dea-Hee
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 한국전기전자재료학회 2003년도 춘계학술대회 논문집 유기절연재료 방전 플라즈마연구회
    • /
    • pp.92-95
    • /
    • 2003
  • In this paper, the emission properties of electrodeless fluorescent lamp were discussed using the inductively coupled plasma. To transmit the electromagnetic energy into the chamber, a RF power of 13.56MHz was applied to the antenna and considering the Ar gas pressure and the RF electric power change, the emission spectrum, Ar-I line, luminance were investigated. At this time the input parameter for ICP RF plasma, Ar gas pressure and RF power were applied in the range of 10~60m Torr, 10~300W respectively.

  • PDF

Investigation of Hg free Electrodeless inductively capacitive tubular discharge (무수은 무전극 유도-용량형 직관형 램프 방전에 관한 연구)

  • 이태일;박해일;백홍구
    • Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
    • /
    • 한국조명전기설비학회 2002년도 학술대회논문집
    • /
    • pp.191-196
    • /
    • 2002
  • In this paper we introduce novel electrode structure for high efficiency discharge. We operate discharge tube under the 0.16 torr pure Xe and apply the sinusoidal wave power to the lamp with 60kHz. We measure the electric power dissipation, plasma parameters, and 828 nm IR intensity. From these data we determine the discharge efficiency, IR intensity/watt, EEDF(Electron energy distribution function). As a result we obtain that the novel electrode structure has better performance in efficiency than that of conventional external electrode system. Also we determine the EEDF for each type of electrode structure by Boltzmann stover, EELNDIF code. The result of Boltzmann equation solving show that the noble electrode system has many high energy electrons compared with the conventional system.

  • PDF

Properties of Ring-shaped Electrodeless Fluorescent Lamps by Frequency (환형무전극 램프의 주파수 변화에 따른 코일 특성)

  • Lee, Young-Hwan;Jo, Ju-Ung;Kim, Kwang-Soo;Choi, Yong-Sung;Park, Dae-Hee
    • Proceedings of the KIEE Conference
    • /
    • 대한전기학회 2003년도 추계학술대회 논문집 전기물성,응용부문
    • /
    • pp.211-213
    • /
    • 2003
  • 무전극 램프에서 유도 결합형 플라즈마가 많이 사용되는데, 코일의 권선수나 주파수에 의해 전기적 특성의 변화가 크다. 따라서, 기존의 환형 무전극 형광램프에 사용되는 ferrite core나 coil을 새롭게 적용하기 위하여 투자율이 2000인 Mn-Zn ferrite를 사용하여 주파수별로 coil의 권선수를 변화시키며 전기적 특성을 측정하여 기존의 무전극 램프와 비교하였다.

  • PDF

Design of an Electronic Ballast Protection Circuit for Electrodeless Fluorescent Lamps using EPLD (EPLD를 이용한 무전극 형광램프용 전자식 안정기의 보호회로 설계)

  • Kim, Hoon;Ma, Xian-Chao;Kim, Hee-Jun
    • Proceedings of the KIEE Conference
    • /
    • 대한전기학회 2007년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
    • /
    • pp.163-165
    • /
    • 2007
  • 본 연구는 무전극 형광램프의 램프 이상 유무를 검출하여 램프에 이상이 발생한 경우 이를 검출하여 전자식 안정기 회로를 보호하는 방법을 제안하고 실험을 통해 검증한다. 제안된 보호회로는 램프 양단에 걸리는 전압을 검출하여 디지털 회로에서 이용할 수 있는 신호로 변환해주는 아날로그 회로부와 이 신호를 이용해 안정기 회로의 인버터 부에 공급되는 PWM 신호를 제거해 주는 디지털 회로부로 구성된다. 제안된 알고리즘은 개발 비교기 IC 소자와 EPLD를 이용해 간단한 회로로 제작되었으며, 차후 집적화에도 유리할 것으로 판단된다.

  • PDF

Preparation of Ultrafine $SnO_2$ Powders by Spray-ICP Technique

  • Kim, Jung-Hwan;Kim, Young-Do;Shin, Kun-Chul;Park, Jong-Hyun
    • Proceedings of the Korea Association of Crystal Growth Conference
    • /
    • 한국결정성장학회 1998년도 PROCEEDINGS OF THE 14TH KACG TECHNICAL MEETING AND THE 5TH KOREA-JAPAN EMGS (ELECTRONIC MATERIALS GROWTH SYMPOSIUM)
    • /
    • pp.65-70
    • /
    • 1998
  • The Spray-ICP technique uses the ICP(Inductively Coupled Plasma) of ultra-high temperature which is produced by r.f power. The ICP is well-kwown as a clean heat source for the preparation of pure ceramic particles because the ICP is a electrodeless-thermal plasma without contamination. In this study,{{{{ { SnO}_{2 } }}}} particles were sythesized from metal salt solution by Spray-ICP technique. The effects of concentration of solution, collecting location of powders were investicated. The prepared {{{{ { SnO}_{2 } }}}} particles from each concentration of solution had same crystalline phase(tetragonal {{{{ { SnO}_{2 } }}}}) a nd the mean size decreased in proportion to the increase of solution concentration. Each {{{{ { SnO}_{2 } }}}} p owders collector in reactor and electrostatic collector had same crystalline phase and morphologies. The mean size of {{{{ { SnO}_{2 } }}}} p articles prepared by Spray-ICP technique was below 30nm.

  • PDF

High luminous efficiency Mercury-free flat light source for LCD BLU

  • Lee, Ju-Kwang;Oh, Byung-Joo;Jung, Jae-Chul;Whang, Ki-Woong
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
    • /
    • pp.1161-1164
    • /
    • 2005
  • A Mercury-free, flat light source which shows high luminance and luminous efficiency simultaneously has been developed. An electrodeless, dielectric barrier discharge is used to generate the plasma using Ne-Xe mixture gas of relatively low gas pressure of a few tens torr in a 4.1 inch diagonal size of flat panel. The basic properties of the long gap glow discharge and its accompanying instabilities, which prevents us from having high luminous efficiency discharge have been analyzed. A new structure and optimized driving methods have been used to generate a glow discharge which shows a wide voltage margin of a few hundred volts. The luminous efficiency and luminance could be 110 lm/W at $1300\;cd/m^2$ and 50 lm/W at $5500\;cd/m^2$.

  • PDF

The Measurement Methods of a Large Light Source Using the Integrating Sphere (적분구를 이용한 대형광원의 측정방법)

  • Hwang, Myung-Keun;Lee, Se-Hyun
    • The Transactions of the Korean Institute of Electrical Engineers C
    • /
    • 제54권12호
    • /
    • pp.585-587
    • /
    • 2005
  • In this paper, We studied two methods to measure optical characteristics of an electrodeless light source using the integrating sphere(diameter 1.5m). One is to use a center measurement method and the other is to use a side measurement method. As a result of analysis, a side measurement methode without auxiliary lamp is almost similar against a center measurement with auxiliary lamp to reduce a measurement of an error for luminous flux, luminous efficacy and spectral distribution etc. Therefore, Sample which cannot measured by reason of big size and heavy weight can be measured by a side measurement method.

Spectral Radiance Change of Electrodeless Sulfur Lamp by Adding Metal-halide into Sulfur Bulb (메탈할라이드를 첨가한 무전극 황전등의 분광분포 변화)

  • Goo, Sun-Geum;Park, Ki-Jun;Chu, Jang-Hee
    • Proceedings of the KIEE Conference
    • /
    • 대한전기학회 1999년도 하계학술대회 논문집 E
    • /
    • pp.2414-2416
    • /
    • 1999
  • 기존 무전극 황전등의 방전광은 500 nm 보다 짧은 파장에서 최대 세기를 가지기 때문에 푸른색을 띤다. 본 연구에서는 각각 588 nm, 671 nm. 767 nm에서 방전광을 발생하는 Na, Li, K를 메탈할라이드의 형태로 황 방전구에 첨가하여 황과 같이 방전시킴으로써 전체 방전광의 분광분포를 장파장으로 이동시켜 방전광을 좀더 온화한 색으로 조절코자 한다. 첨가한 세가지 종류 모두 무전극 황전등의 방전광을 온화한 색으로 바꿀 수 있었다.

  • PDF

무전극 황전등의 색온도 조정 및 연색성 평가수 향상

  • 박기준;구선근;추장희
    • The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • 제14권2호
    • /
    • pp.78-84
    • /
    • 2000
  • 마이크로파 방전 무전극 황전등은 마그네트론에서 발생된 마이크로파로 이원자 황을 여기하여 방출되는 빛을 조명에 사용하는 차세대 조명기구이다. 이원자 황에서 방출된 빛은 자외선과 적외선이 매우 적고 가시광선 영역에서 연속적인 분광 분포를 가지며 발광 효율은 100[1m/W] 이상으로 매우 높다 본 논문에서는 전력연구원에서 국내 최초로 개발한 마이크로파 여기형 무전극 방전등을 소개한다. 방전구의 회전, 방전전력과 압력의 조정, 및 Na 등의 첨가를 통해 전등의 상관색온도를 가변(2,500 - 10,000 K 범위)하였다. 아울러 연색성 평가수를 90 이상으로 개선 할 수 있음을 보였다.

  • PDF

A Study on the Development of a Power Supply for Driving Magnetron (마그네트론 구동용 전원장치 설계에 관한 연구)

  • 김일권;한주섭;조성훈;이성근;길경석
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 한국해양정보통신학회 2002년도 추계종합학술대회
    • /
    • pp.744-748
    • /
    • 2002
  • This paper describes a power supply of a CW magnetron for driving a electrodeless plasma lamp. The proposed power supply consists of a power factor controller, a series resonant ZVS half bridge inverter, a high voltage leakage transformer, and two IGBT drives. From the simulation results, it was confirmed that the proposed circuits can control the input power of the magnetron up to 33.3[%] linearly by adjust driving frequency of the inverter.

  • PDF