• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1730-1733
• /
• 2007

As semiconductor and MEMS devices become smaller, testing process during their production should follow such a high density trend. A circuit inspection tool "probe card" makes contact with electrode pads of the device under test (DUT). Nowadays, electrode pads are irregularly arranged and have height difference. In order to absorb variations in the heights of electrode pads and to generate contact loads, contact probes must have some levels of mechanical spring properties. Contact probes must also yield a force to break the surface native oxide layer or contamination layer on the electrodes to make electric contact. In this research, new vertical micro contact probe with bellows shape is developed to overcome shortage of prior work. Especially, novel bellows shape is used to reduce stress concentration in this design and stopper is used to change the stiffness of micro contact probe. Variable stiffness can be one solution to overcome the height difference of electrode pads.

• 한국응급구조학회지
• /
• 제20권1호
• /
• pp.83-94
• /
• 2016

Purpose: This study aimed to assess defibrillator pad positioning by the general public and healthcare providers during basic life support (BLS) renewal education (RE). Methods: A total 130 subjects performed defibrillation using an automated external defibrillator (AED) equipped with electrode pads developed by the researchers and male resuscitation manikins, in order to assess electrode pad placement (EPP) before BLS RE. Subjects included 54 Healthcare providers (HP) and 76 members of the general public (GP). Results: The apex EPP was positioned in the risk area (RA), more than 5 cm distant from the area recommended, by 63.2% of the GP (n = 48). The apex EPP was positioned in the RA by 44.4% of the HP (n = 23). The distance from the apex (GP $5.27{\pm}2.21cm$, HP $4.18{\pm}1.71cm$) was statistically significant, using Student's t-test. Conclusion: For both GP and HP, apex EPP was significantly in error. Thus, to prevent defibrillation failures, EPP education and practice for GP and HP in all BLS education programs should be improved, and incorrect Korean cardiopulmonary resuscitation guidelines and related literature should be revised and corrected.

• 대한소아치과학회지
• /
• 제21권2호
• /
• pp.525-532
• /
• 1994

The purpose of this report was to evaluate the effect of Dental Electronic Anesthesia on pain inhibition for clinical use. The subject for this study were 30 children whose Frankl behavioral rate is positive. The subjects was divided into two groups, the first group described by control group and the second group described by experimental group anesthetized with Dental Electronic Anesthetic device. And then three kind of treatments were done : extraction of deciduous teeth, application of rubber dam, cavity preparation for preventive resin restoration. 3M Dental Electronic Anesthesia System was used for this study : its electric impulse stimulate the skin surface by external electrode pads. The results were as follows. 1. Degree of the pain & the apprehension decreased in experimental group. 2. Degree of the pain & the apprehension showed statistical differences among three treatments procedures in the control group but, not showed statistical differences in the experimental group.

• Journal of Electrochemical Science and Technology
• /
• 제4권4호
• /
• pp.146-152
• /
• 2013

We demonstrate that carbon electrodes screen-printed directly on cellulose paper can be employed to perform bipolar electrochemistry. In addition, an array of 18 screen-printed bipolar electrodes (BPEs) can be simultaneously controlled using a single pair of driving electrodes. The electrochemical state of the BPEs is read-out using electrogenerated chemiluminescence. These results are important because they demonstrate the feasibility of coupling bipolar electrochemistry to microfluidic paperbased analytical devices (${\mu}PADs$) to perform highly multiplexed, low-cost measurements.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 춘계학술대회 논문집
• /
• pp.59-64
• /
• 1998

We need to achieve th mass product through methods of higher efficient, higher precise manufacturing process than those of existing precision abrasive machining. Thus, this study is to develop mirror-like surface machining technique of outer diameter of the piston pin by the compound magneto-electrolytic abrasive polishing system. The procedure of machining is followed as first, fulfill the pre-processing by cylindrical grinder, second, complete mirror-like surface by the method of magneto-electrolytic abrasive polishing used CBN non-woven abrasive pads. In this study, it was found that the best suitable conditions of mirror-like surface polishing were that the electrode density was 0.1A/$\textrm{cm}^2$, the applied pressure 1.5kgf/$\textrm{cm}^2$, the feed rate 0.5mm/rev, and the rotoation velocity of workpiece 80rpm, and that the surface roughness was reduced in this conditions.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.450-450
• /
• 2006

Organic light-emitting diodes (OLED) as pixels for flat panel displays are being actively pursued because of their relatively simple structure, high brightness, and self-emitting nature [1, 2]. The top-emitting diode structure is preferred because of their geometrical advantage allowing high pixel resolution [3]. To enhance the performance of TOLEDs, it is important to deposit transparent top cathode films, such as transparent conducting oxides (TCOs), which have high transparency as well as low resistance. In this work, we report on investigation of the characteristics of an indium tin oxide (ITO) cathode electrode, which was deposited on organic films by using a radio-frequency magnetron sputtering method, for use in top-emitting organic light emitting diodes (TOLED). The cathode electrode composed of a very thin layer of Mg-Ag and an overlaying ITO film. The Mg-Ag reduces the contact resistivity and plasma damage to the underlying organic layer during the ITO sputtering process. Transfer length method (TLM) patterns were defined by the standard shadow mask for measuring specific contact resistances. The spacing between the TLM pads varied from 30 to $75\;{\mu}m$. The electrical properties of ITO as a function of the deposition and annealing conditions were investigated. The surface roughness as a function of the plasma conditions was determined by Atomic Force Microscopes (AFM).

• 대한통합의학회지
• /
• 제2권2호
• /
• pp.79-88
• /
• 2014

Purpose: This study investigated the relationship between smartphone addiction propensities and compare muscle activity of the forearms and brain wave depend on the type of smartphone when inputting text messages. Method: We used an EMG to measure the change in muscle activity by attaching pads to the four muscles in both forearms of all 16 participants. We simultaneously conducted EEG measurements by observing the changes in alpha and beta waves recorded from electrode attached to both ears and the forehead of the participants. The participants had to input a given text using three different types of smartphones for ten minutes each. Result: The comparison of the EMG when inputting text involved a one way analysis of variance and the results showed that the iPad3 was highest for muscle activity followed by GALAXY Note2 and iPhone4. For EEG measurement, a one way analysis of variance was also used and the results showed iPhone4 was higest followed by GALAXY Note2 and finally iPad3 for EEG stress score. Conclusion: The results are thought to be used as reference data for smart phone users.

• The Korean Journal of Pain
• /
• 제12권1호
• /
• pp.64-69
• /
• 1999

Background: The new drug HP228 is a cytokine restraining agent with a broad spectrum of anti-inflammatory, analgesic, and antipyretic activity. Six healthy, adult, male volunteers were studied to determine the independent and interactive effects of HP228 and morphine on pain perception. Methods: Two groups of stimuli were applied to each volunteers before drug administration as control, 20 min after morphine and HP228 administration, and 20 min after combined administration of these two drugs. Two adhesive electrically-conducting pads were applied on opposite sides of the arm approximately 8 cm apart. The electrode were connected to an electrical impulse generator and 50 Hz 1 msec pulses of incrementally increasing intensity were delivered at 1 sec intervals. The analgesic endpoints were the current intensity (mA) at which the subject first detected the stimulus (THRESH), the intensity at which the stimulus was first idenfied as being painful (PAIN), and the intensity at which the subject requested that the stimulus be terminated due to discomfort (LIMIT). A second series of stimuli were applied immediately thereafter using 1-sec duration 50 Hz tetanus pulses with increasing intensities at 2~5 sec intervals. Results: There were significant differences between drug treatments (Morphine, HP228, HP228/Morphine) and control (No drugs) in any of the measurements (PAIN, LIMIT) except THRESH with the twitch and tetanus test. Conclusions: The data suggests that HP228 is an analgesic, but it does not appear to interact with morphine in an additive manner.

• 대한기계학회논문집A
• /
• 제36권5호
• /
• pp.475-479
• /
• 2012

본 논문은 고차가지구조 폴리머인 AEO3000 를 이용한 UV 광경화 성형 공정을 제안하고자 한다. 이는 기존의 바이오칩 제작에 사용되는 PDMS 보다 경도가 높아 금속 전극 형성이 용이하고 제작 공정이 빠르다는 장점을 갖는다. AEO3000 을 이용하여 본 연구에서는 4 개의 소자를 전기적 유체적으로 연결할 수 있는 전기유체 통합벤치를 제작하고 미소유체 혼합소자와 세포분리소자를 연결, 본 소재와 공정이 바이오칩에 적용될 수 있음을 검증하였다. 전기 유체적 특성 분석 결과 전기적 접촉 저항은 $0.75{\pm}0.44{\Omega}$으로 충분히 작은 값을 보였으며, 유체 접속의 압력 저하는 8.3kPa로 기존의 튜브 연결 방법 대비 39.3% 개선된 값을 보였다. 통합벤치에 접속된 소자에 활성 및 비활성 효모를 주입하여 순차적인 혼합 및 재분리를 성공적으로 구현함으로써 본 소자에 적용된 AEO3000 및 UV 광경화 공정이 생체시료의 처리에 적용될 수 있음을 실험적으로 검증하였다. 이는 바이오 의료 분야에 적용 가능한 생체 친화적 소재의 고속 생산에 응용될 수 있다.