• 제목/요약/키워드: Electrochemical Effectiveness Model

검색결과 6건 처리시간 0.019초

음극지지 고체산화물 연료전지 다공성 양극에서의 산소고갈 특성에 관한 수치해석 연구 (Numerical Study on Oxygen Depletion Characteristics of Porous Cathodes in Anode-Supported Solid Oxide Fuel Cells)

  • 신동우;남진현;김찬중
    • 대한기계학회논문집B
    • /
    • 제41권4호
    • /
    • pp.257-268
    • /
    • 2017
  • 본 논문에서는 우선 전기화학 유효도 모델에 기반하여 고체산화물 연료전지의 효율적인 2차원 해석모델을 제안하였다. 전기화학 유효도 모델은 연료전지 전극내 전해질 근처의 얇은 활성기능층에서 일어나는 복잡한 반응/전달현상을 고려하여 전극의 전류생산 성능을 정확하게 예측할 수 있는 장점을 가진다. 개발된 2차원 해석모델은 신뢰성을 검증한 후 음극지지 고체산화물 연료전지의 유로 횡방향 전류밀도 및 산소농도 분포를 계산하는데 사용되었으며 이를 통해 다공성 양극에서의 산소고갈 특성을 고찰하였다. 또한 효율적이면서도 정확한 계산을 위한 유로 횡방향 최소 필요격자수에 대한 수치해석 연구도 진행하였다.

Copper Recovery from Printed Circuit Boards Waste Sludge: Multi-step Current Electrolysis and Modeling

  • Nguyen, Huyen T.T.;Pham, Huy K.;Nguyen, Vu A.;Mai, Tung T.;Le, Hang T.T.;Hoang, Thuy T.B.
    • Journal of Electrochemical Science and Technology
    • /
    • 제13권2호
    • /
    • pp.186-198
    • /
    • 2022
  • Heavy metals recovery from Printed Circuit Boards industrial wastewater is crucial because of its cost effectiveness and environmental friendliness. In this study, a copper recovery route combining the sequential processes of acid leaching and LIX 984N extracting with an electrowinning technique from Printed Circuit Boards production's sludge was performed. The used residual sludge was originated from Hanoi Urban Environment One Member Limited Company (URENCO). The extracted solution from the printed circuit boards waste sludge containing a high copper concentration of 19.2 g/L and a small amount of iron (0.575 ppm) was used as electrolyte for the subsequent electrolysis process. By using a simulation model for multi-step current electrolysis, the reasonable current densities for an electrolysis time interval of 30 minutes were determined, to optimize the specific consumption energy for the copper recovery. The mathematical simulation model was built to calculate the important parameters of this process.

Relative Comparison of Cathode Polarizations in Solid Oxide Fuel Cells Using the Spreading Concept in AC 2 Point Impedance Spectroscopy

  • Lee, Byung-Kook;Kim, Eui-Hyun;Hwang, Jin-Ha
    • 한국세라믹학회지
    • /
    • 제50권2호
    • /
    • pp.163-167
    • /
    • 2013
  • A modified two-point impedance spectroscopy technique exploits the geometric constriction between an electrolyte and a cathode with an emphasis on semispherical-shaped electrolytes. The spatial limitation in the electrolyte/electrode interface leads to local amplification of the electrochemical reaction occurring in the corresponding electrolyte/electrode region. The modified impedance spectroscopy was applied to electrical monitoring of a YSZ ($Y_2O_3$-stabilized $ZrO_2$)/SSC ($Sm_{0.5}Sr_{0.5}CoO_3$) system. The resolved bulk and interfacial component was numerically analyzed in combination with an equivalent circuit model. The effectiveness of the "spreading resistance" concept is validated by analysis of the electrode polarization in the cathode materials of solid oxide fuel cells.

고체 산화물 수전해 시스템(SOEC)에서 전기화학적 특성의 온도 의존성에 대한 수치 모델링 (A Numerical Modeling of the Temperature Dependence on Electrochemical Properties for Solid Oxide Electrolysis Cell(SOEC))

  • 한경호;정정열;윤도영
    • 에너지공학
    • /
    • 제29권2호
    • /
    • pp.1-9
    • /
    • 2020
  • 최근 탄화수소를 에너지원으로 사용하는 엔진을 대체할 동력원으로 연료 전지가 주목을 받게 되면서 수소 생산 기술에 대한 연구가 활발하게 진행되고 있다. 수소를 생산하는 다양한 방법 중에 고체 산화물 수전해 시스템(SOEC)은 수소를 생산하기 위한 기초적이고, 친환경적인 방법이다. 고체 산화물 수전해 시스템은 고온, 고압 조건에서 운전이 가능하여 낮은 에너지 수요와 높은 열효율을 지니기 때문에 실험적인 연구가 활발하게 진행되고 있다. 하지만 실험적인 연구 성과에 비해 수치모델 연구는 비교적 부진하다. 이에 대한 원인으로 기존의 수치모델이 온도와 압력의 변화에 따른 성능 예측의 유효성이 상당히 낮기 때문으로 판단하였다. 이에 본 연구에서는 고체 산화물 수전해 시스템의 셀 성능 예측의 유효성을 높일 수 있는 방안을 제시하기 위해서 Patterened Ni-YSZ cermet electrode(40 wt%, Ni-60 wt% YSZ)/8-YSZ (TOSOH, TZ8Y)/LSM (La0.9Sr0.1MnO3)로 구성된 상용 막-극 접합체의 기존의 연구 데이터를 활용하였다. 온도에 따른 전기화학적 특성의 영향을 수치적으로 분석한 결과, 유효성에 가장 큰 편차를 가져오는 변수들은 charge transfer coefficient(CTC), exchange current density, diffusion coefficient, electrical conductivity인 것으로 나타났다. 온도와 압력에 따른 해당 변수들의 영향 및 경향성을 분석하여 과전압 모델을 제시하였다. 다양한 모델의 적용과 타당성을 확보하기 위해서 교차-검증이 도입되었다. 그 결과, 체계화된 유효성 검증 과정에 기초한 고체 산화물 수전해 시스템의 수치 모델은 뛰어난 성능의 예측 결과를 보여주었다.

Lessons from Korean Innovation Model for ASEAN Countries Towards a Knowledge Economy

  • Ocon, Joey D.;Phihusut, Doungkamon;del Rosario, Julie Anne D.;Tuan, Trinh Ngoc;Lee, Jaeyoung
    • STI Policy Review
    • /
    • 제4권2호
    • /
    • pp.19-40
    • /
    • 2013
  • The Association of Southeast Asian Nations (ASEAN) achieved relatively rapid economic growth over the past decade. Sustainable growth among member states, however, is put into question due to macroeconomic challenges, political risk, and vulnerability to external shocks. Developed countries, in contrast, have turned into less labor-intensive technologies to further expand their economies. In this paper, we review the science, technology, and innovation (STI) policies and statuses of the scientific and technological capabilities of the ASEAN member countries. Empirical results based on STI indicators (R&D spending, publications, patents, and knowledge economy indices) reveal considerable variation between the science and technology (S&T) competence and effectiveness of STI policies of ASEAN members. We have categorized nations into clusters according their situations in their S&T productivity. Under the Korean Innovation Model, Cambodia, Laos, Myanmar, and Brunei are classified as being in the institutional-building stage, while Malaysia, Thailand, Indonesia, the Philippines, and Vietnam in the catch up stage, and Singapore in the post-catch up stage. Finally, policy prescriptions on how to enhance the S&T capabilities of the developing ASEAN countries, based on the South Korea development experience, are presented.

RC조 구조물의 최적 음극방식 조건 설정을 위한 함수율의 영향에 대한 평가 (Effect of Moisture on the Current Density for Optimized Cathodic Protection Condition in RC Structures)

  • 박동천;조규환;안재철
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2013년도 춘계 학술논문 발표대회
    • /
    • pp.29-30
    • /
    • 2013
  • Steel corrosion is the most serious problem in RC structures. Even though patch repair method is normally applied in repair system, the effectiveness is not enough. Cathodic protection in active repair method to deteriorated RC structures. FEM model was developed to simulate the optimized cathodic protection condition. Iro oxidation, hydrogen evolution and oxygen reduction were considered to expect current distribution. Moisture content in concrete which can affect the electrolyte conductivity was used as initial condition.

  • PDF