• 반도체디스플레이기술학회지
• /
• 제7권3호
• /
• pp.41-43
• /
• 2008

The electro-optical characteristics of the Liquid Crystal on Silicon (hereinafter "LCOS") micro-display on vertically alignment (VA) mode were studied depending on various cell gaps. 5 different cell gaps, such as $1.4{\mu}m,\;1.8{\mu}m,\;2.1{\mu}m,\;2.4{\mu}m$ and $2.8{\mu}m$, were selected. The reflectance-voltage (R-V) characteristics, distributions of reflected light and reflectance were calculated with 3-dimmensional LC code. At the center of cell, the smallest $1.4{\mu}m$ cell gap showed the lowest reflectance and the largest $2.8{\mu}m$ cell gap showed the highest reflectance due to the surface anchoring effect. In case of $2.1{\mu}m$ cell gap, the sum of reflectance overall cell was the highest value. Considering the reflectance and RV curve characteristic, the optimized cell gap was $2.1{\mu}m$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.292-294
• /
• 2008

We have developed new reflective LCD for Mixed twist nematic LC mode with high quality image. We have found out an optimal twist angle of LC and optical film's axis by simulation. Also we measured electro-optic characteristics for new design panel. As a result, high reflectance and wide viewing angle characteristics were achieved.

• 대한전자공학회논문지SD
• /
• 제46권8호
• /
• pp.6-11
• /
• 2009

VA Mode LC를 사용하는 Full-HD급 LCOS 마이크로디스플레이에서 셀 상하 간격의 변화에 따른 전기광학적 특성의 변화에 관하여 3차원 LC code를 이용하여 연구하였다. 5가지의 다른 셀 상하 간격 (1.4 ${\mu}m$, 1.8 ${\mu}m$, 2.1 ${\mu}m$, 2.4 ${\mu}m$ 그리고 2.8 ${\mu}m$)의 변화에 따라 Reflectance-Voltage 특성, 반사광 및 반사율 분포, Optical Fill Factor 그리고 명암비를 비교하였다. Surface Anchoring 효과에 의해 상하 간격이 증가하면서 반사율은 증가하였으나 Optical Fill Factor와 명암비를 고려할 경우, 중간 수준의 간격인 2.1 ${\mu}m$ 의 특성이 가장 우수함을 확인할 수 있었다. 동일한 구조를 갖고 있는 0.7 인치 LCOS 패널을 제작하여 광학적 측정을 해 본 결과 시뮬레이션 결과와 통일함을 확인할 수 있었다.

• 한국군사과학기술학회지
• /
• 제1권1호
• /
• pp.114-127
• /
• 1998

A user friendly computer code(EMCOMST; Electro-Magnetic response for COMposite STructures) was developed which provides with computations of the response characteristics such as reflectance and transmittance to the incident wave angles, frequencies, composite thicknesses, ply orientations, and types of backplate as the linearly polarized transverse electro-magnetic wave is emitted to the advanced composite structures. In this investigation were reviewed the electromagnetic characteristics of the continuous orthotropic fiber-reinforced organic matrix composites with or without ferrite fillers, which are actively applied to low-weight and high-strength aircraft structures. Also were calculated the response of the three layered compound structures which have appropriately stacked above-mentioned materials as transmitting layer, absorbing layer, reflection layer, respectively under the specific thickness constraints for mechanical strength design requirements. For the composite structures presented in this study, minimum reflectance value less than -5㏈ can be obtained in the frequency range of 4 to 12 ㎓. In addition, analysis of structures attached isotropic radar absorbing materials(RAM) is facilitated by putting the material properties in the material input card entries adequately.

• 한국진공학회지
• /
• 제20권4호
• /
• pp.288-293
• /
• 2011

본 논문은 InGaN/GaN 다중양자우물 구조를 가지는 녹색 발광다이오드의 활성층 내 인듐(In) 조성비와 piezoelectric field에 대한 전계 흡수 현상을 연구하였다. 활성층 내 결정학적 성질과 In 조성비는 double crystal X-ray diffraction 측정으로 분석하였으며, $1{\times}1\;mm^2$ 대면적 칩을 제작하여 발광특성을 조사하였다. 또한, 활성층 내 piezoelectric field는 electro-reflectance spectroscopy로부터 측정한 compensation voltage를 이용해 계산하였고, 인가전압에 따른 photocurrent의 변화를 측정함으로써 녹색 발광 소자의 전기 광학적 특성을 분석하였다.

• 반도체디스플레이기술학회지
• /
• 제8권2호
• /
• pp.59-62
• /
• 2009

In order to check the validation of LC simulation, 0.7 inch LCOS panel in full-HD resolution was fabricated and used for the electro-optical measurement. Compared the measured data with the calculated data, the averaged difference was 1.72% under 0 ~ +6 V bias on pixel electrode. To improve the optical characteristics of full-HD LCOS panel, the planar structure and trench structures (0.1 um, 0.2 um and 0.3 um-in-depth) between adjacent pixels were investigated with LC simulation. The planar structure showed the higher reflectance and faster reflectance-voltage response time than the trench structure. The optical fill factor and contrast ratio of planar structure were also higher than those of trench structures. As compared 1 um-in-depth trench structure resembled to the real structure with the planar structure, the optical fill factor was improved by 1.15% and the contrast ratio was improved by 5.26%. In order to minimize the loss of luminance and contrast ratio, the planar structure need to be applied between adjacent pixels.

• 한국재료학회지
• /
• 제20권8호
• /
• pp.412-417
• /
• 2010

Mo thin films were used for the back electrode because of the low resistivity in the Mo/$CuInGaSe_2$ contact in chalcopyrite solar cells. $1\;{\mu}m$ thick Mo thin films were deposited on soda lime glass by varying the Ar pressure with the dc-magnetron sputtering process. The effects of the Ar pressure on the morphology of the Mo back electrode were studied and the relationships between the morphology and electro-optical properties, namely, the resistivity as well as the reflectance of the Mo thin films, were investigated. The resitivity increased from $24\;{\mu}{\Omega}{\cdot}cm$ to $11833\;{\mu}{\Omega}{\cdot}cm$; this was caused by the increased surface defect and low crystallinity as the Ar pressure increased from $3{\times}10^{-3}$ to $3{\times}10^{-2}\;Torr$. The surface morphologies of the Mo thin films changed from somewhat coarse fibrous structures to irregular and fine celled structures with increased surface cracks along the cell boundaries, as the Ar pressure increased from $3{\times}10^{-3}$ to $3{\times}10^{-2}\;Torr$. The changes of reflectances in the visible light range with Ar pressures were mainly attributed to the surface morphological changes of the Mo thin films. The reflectance in the visible light range showed the highest value of 45% at $3{\times}10^{-3}\;Torr$ and decreased to 18.5% at $3{\times}10^{-2}\;Torr$.

• 한국광학회지
• /
• 제16권6호
• /
• pp.553-559
• /
• 2005

(110) ZnTe 결정을 사용한 광정류(Optical Rectification)법에 의한 테라헤르츠파의 발생과 자유공간 전광 샘플링(Free-Space Electro-Optic Sampling; FS-EOS)법에 의한 테라헤르츠파의 검출특성에 대해서 보고한다. ZnTe 결정에 펌프용 레이저광에 대한 반사방지막 코팅을 실시함으로서 테라헤르츠파 신호크기가 $27\%$ 증가함을 알 수 있었다. ZnTe 결정의 두께가 얇을수록 테라헤르츠파의 신호의 크기는 작으나 광대역의 주파수를 가진 스펙트럼이 얻어졌다. 또한 레이저광의 편광방향과 ZnTe 결정의 (001)축사이의 각도에 따른 테라헤르츠파의 신호 변화, 펌프광 출력에 따른 테라헤르츠파의 신호크기 변화 등에 대한 특성이 조사되었다.

• 한국전기전자재료학회논문지
• /
• 제16권10호
• /
• pp.908-913
• /
• 2003

We have performed computer simulation to obtain electro-optic characteristics of reflective hybrid aligned nematic liquid crystal displays (LCDs) driven by fringe field. The results show that the optimal retardation value (dΔn) of the cell is 0.289 ${\mu}$m, which allows for the cell to have a practical cell gap of larger than 3 ${\mu}$m when manufacturing. A reflectance of the dark state is only 0.114 % for an incident light 550 nm. At this condition, the light efficiency of white state reaches 92.7 %. The display with optimized cell parameters shows that the contrast ratio greater than 5 exists over 600 of polar angle in all directions and lower driving voltage than that of fringe-field driven homogeneously aligned reflective LCD.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.421-422
• /
• 2007

The fringe electric field driven transflective liquid crystal display with dual orientation has a problem that the voltage-dependent transmittance and reflectance curves do not match each other, requiring a dual driving circuit to achieve a high electro-optic performance. Optimizations of the electrode structure in the array substrate and rubbing direction solve this problem so that the transflective display with a single gap and a single gamma curve for reflective and transmissive region is possible.