• 고무기술
• /
• 제13권1호
• /
• pp.1-9
• /
• 2012

Click chemistry had enjoyed a wealthy decade after it was introduced by K.B.Sharpless and his co-worker on 2001. Since there is no optimized method for synthesis of click polymer, therefore, this paper introduced three click reaction methods such as catalyst, non-catalyst and azide-end capping for fluorene-based functional click polymers. The obtained polymers have reasonable molecular weight with narrow PDI. The polymers are thermally stable and almost emitted blue light emission. The synthesized fluorene-based functional click polymers were characterized to compare the effect of click reaction methods on polymer electro-optical properties as well as device performance on quasi-solid-state dye sensitized solar cells (DSSCs) applications. The DSSCs with configuration of $SnO_2:F/TiO_2/N719$ dye/quasi-solid-state electrolyte/Pt devices were fabricated using these click polymers as a solid-state electrolyte components. Among the devices, the catalyzed click polymer composed device exhibited a high power conversion efficiency of 4.62% under AM 1.5G illumination ($100mW/cm^2$).These click polymers are promising materials in device application and $Cu^I$-catalyst 1, 3-dipolar cycloaddition click reaction is an efficient synthetic methodology.

• 한국재료학회지
• /
• 제22권10호
• /
• pp.508-512
• /
• 2012

ZnO thin films were grown on a sapphire substrate by RF magnetron sputtering. The characteristics of the thin films were investigated by ellipsometry, X-ray diffraction (XRD), atomic force microscopy (AFM), photoluminescence (PL), and Hall effect. The substrate temperature and growth time were kept constant at $200^{\circ}C$ at 30 minutes, respectively. The RF power was varied within the range of 200 to 500 W. ZnO thin films on sapphire substrate were grown with a preferred C-axis orientation along the (0002) plan; X-ray diffraction peak shifted to low angles and PL emission peak was red-shifted with increasing RF power. In addition, the electrical characteristics of the carrier density and mobility decreased and the resistivity increased. In the electrical and optical properties of ZnO thin films under variation of RF power, the crystallinity improved and the roughness increased with increasing RF power due to decreased oxygen vacancies and the presence of excess zinc above the optimal range of RF power. Consequently, the crystallinity of the ZnO thin films grown on sapphire substrate was improved with RF sputtering power; however, excess Zn resulted because of the structural, electrical, and optical properties of the ZnO thin films. Thus, excess RF power will act as a factor that degrades the device characteristics.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.348-348
• /
• 2010

Nanostructures have great potential in various devices due to the their promising electronic and optical properties. Nano-patterned the front surface of a solar cell generally results in improved performance, mostly due to an increase in the short-circuit current by the incident photons strike the cell surface at an angle. In this work, we investigate AFM-assisted nano-patterned field effect transistors (FETs) with vairous silicon oxide distance value D, from ${\sim}0.5{\mu}m$ to $1{\mu}m$. Also, we compared the electro-optical characteristics of the patterned FETs and the non-patterned FETs (reference device) based on both 2-dimensional simulation and experimental results for the wavelength from 100nm to 900nm. In addition, we report electric characteristics for illuminated surface in schottky barrier field effect transistors (SB-FETs).

• 전자공학회논문지A
• /
• 제32A권12호
• /
• pp.80-90
• /
• 1995

In this paper, methods of designing CPW(coplanar waveguide) traveling-wave electrodes are described and their properties are discussed. Especially, the effect of buffer layer thickness to the microwave characteristics of the CPW electrodes are studied in detail. The trade-off relationship between buffer layer thickness and electro-optical properties of the devices are clearly revealde. The microwave characteristics and driving voltage can be further improved by using selected parameters suggested in this paper. To reduce time and effort in designing CPW electrode structure, exact analytical models are proposed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.780-785
• /
• 2003

Recently the trends in information storage devices need small size, mobility, high capacity, and low power consumption etc. To satisfy those, the development of high performance actuator is an important issue. Compared with general linear actuator for optical disk drive, swingarm type rotary actuator is suitable to design in small form factor and has fast access time for random access. Swingarm actuator is designed considering the structural problem and the actuating force of VCM(Voice Coil Motor). The increase of mass caused by optical components makes vibration problems of swing-arm, therefore resonance frequency should be increased and inertia has to be reduced. ANSYS FEM tool is employed in optimizing swingarm. The VCM is designed using 3-D electro-magnetic analysis, and parameters of magnetic circuit are determined to matte large flux density. The large flux density enables to achieve low power consumption. VCM holder is designed to get the mass balance of total actuator and this balance reduces the magnitude of critical mode relative to pivot bearing, It is expected that swingarm type rotary actuator designed by this method is available to variable type of micro optical disk drives.

• 한국광학회지
• /
• 제32권2호
• /
• pp.55-61
• /
• 2021

850 nm 대역의 발진 파장을 갖는 GaAs/AlGaAs 다중양자우물 레이저 다이오드의 lateral-mode 특성과 이 특성이 출력 광파워 kink에 미치는 영향을 조사하였다. 이를 위해 전기적-열적-광학적 시뮬레이션을 self-consistent하게 수행하고, 제작된 레이저 다이오드 소자들을 측정하였다. 연구 결과를 바탕으로 높은 출력 파워에서도 single lateral-mode를 유지해서 좋은 beam quality를 유지할 수 있는 최적의 P-cladding 두께를 결정하였다.

• 한국통신학회논문지
• /
• 제42권5호
• /
• pp.1049-1057
• /
• 2017

차량용 멀티미디어 시스템은 자동차 산업에 있어서 매우 중요한 요소 중 하나이다. 특히, 프리미엄 고속버스와 같은 고급상용차에서의 멀티미디어 시스템은 더욱 중요하다. 우리는 본 논문에서 MOST150을 기반으로 MEP(MOST Ethernet Packets)을 이용해 프리미엄 고속버스용 멀티미디어 시스템 구조를 제안했고, Prototype을 설계 및 구현했다. 제안한 시스템 구조를 구현하기 위해 멀티미디어 시스템이 운용될 수 있는 I.MX6기반의 Board를 설계했다. 소프트웨어는 Open Source Platform인 Android를 기반으로 프리미엄 고속버스용 멀티미디어 시스템을 설계했다. MOST는 고속의 멀티미디어 네트워크 기술이며, 차량의 멀티미디어시스템 설계에 사용된다. 기본적으로 링 토폴로지(Ring Topology)를 사용하고, 최대 64개의 MOST 장치를 연결할 수 있다. 또한 MOST 네트워크는 광모듈(POF)을 이용해 통신하기 때문에 EMII(Electro-Magnetic Interference) 및 EMC(Electro-Magnetic Compatibility) 요구조건을 충족한다.

• 한국광학회지
• /
• 제12권2호
• /
• pp.135-142
• /
• 2001

최근 플라스틱 광섬유(Plastic Optical Fiber, POF)가 홈 네트워크(Home Network) 및 LAN(Local Area Network)의 새로운 통신채널로 등장하였다. 특히 PMMA 계에 기반을 둔 언덕형 굴절률 분포 플라스틱 광섬유(Graded Index Plastic Optical Feiber)는 500nm와 650nm 근처에서 아주 적은 손실을 가지므로 이 파장영역에서의 광원으로서 극초단 광펄스 생성이 요구되고 있다. 본 연구에서는 650nm InGaAIP FP(fabry perot) LD와 간단한 RF(radio frequency)소자들을 이용한 회로를 구성하고 이득스위칭 기술을 사용하여 1GHz의 펄스 반복율을 가지고 33.3psec 정도의 짧은 반치선폭(FWHM)을 가지는 광펄스를 생성시키는데 성공하였다. 이득스위칭 된 광펄스는 주입되는 직류전류(DC bias current)와 변조되는 주파에 따라 반치선폭은 33.3-82.8 psec, 펄스 에너지는 0.97-9.69pJ의 값을 얻었다. 또한 CW 발진과 이득스위칭 된 광펄스의 스펙트럼 폭은 각각 0.44nm, 150nm로 됨을 측정하였다. 이러한 결과를 가지는 연속적인 광펄스는 직류전류와 VCO에 의한 변조주파수의 적절한 선택에 따라 초고속 근거리 광통신분야 뿐만 아니라 여러 가지 초고속 광소자 및 전자소자의 특성평가 등에 응용될수 있을 것으로 예상된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 춘계학술대회 논문집
• /
• pp.61-62
• /
• 2009

Electro-optical properties of liquid crystal display (LCD) using fringe-field switching (FFS) devices depend on many parameters such as cell retardation, electrode structure, magnitude and sign of dielectric anisotropy, rubbing angle and cell gap. In this paper, the light efficiency of FFS device depending on magnitude of positive dielectric anisotropy with other cell parameters such as rubbing angle and angle and cell gap have been explored compared with FFS device using LC with negative dielectric anisotropy.

• 한국광학회지
• /
• 제5권3호
• /
• pp.411-417
• /
• 1994

액정층을 지나는 빛의 편광상태의 변화를 뽀앙카레공에서의 회전변환으로 나타내어, 액정층에 걸어준 전압에 대한 회전변환이 회전각과 회전축의 변화를 쟀다. 이로부터 액정셀에 걸린 전압이 비선택전압에서 선택전압으로 바뀔 때의 회전변환의 회전각이 $180^{\circ}$에 가장 가까운 구동전압을 결정하고, 이 전압으로 액정셀을 구동할 때 화면의 콘트라스트 및 투과율이 최대가 되는 현광판과 검광판의 투과축의 방향을 회전변환의 일반적인 특성을 써서 결정하고 실험적으로 확인하였다.