• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1473-1475
• /
• 2006

The electro-optic properties of an active-matrix polymer network liquid crystal display (AM-PNLCD) with crossed polarizer films to improve its contrast ratio were evaluated. By using crossed polarizer films, it shows good contrast ratio as well as wide viewing angle and adequate response time at normal TFT-twisted nematic (TN) LCD driving voltage (2.8V).

• 한국군사과학기술학회지
• /
• 제5권2호
• /
• pp.116-122
• /
• 2002

Electro Explosive Devices can be susceptible to electromagnetic interference. When these components are exposed to external electromagnetic fields, it may cause to induce sufficient current to generate enough heat for an inadvertent detonation. It is almost impossible to monitor the event of firing throughout the electromagnetic environment test. The survivability of EED for hazards of electromagnetic radiation is investigated. A fiber optic sensor is installed near the bridge wire after removing explosive material in order to measure the induced current on the bridge wire. The length of lead-wire of the EED fabricated is around 15 cm.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1998년도 IUMRS-ICEM ABSTRACT BOOK
• /
• pp.55.2-55
• /
• 1998

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.839-842
• /
• 2004

We present a fast-switching electro-optical device based on flexoelectro-optic effect in short pitch cholesterics oriented in uniform lying helix texture. The device has two operating modes: amplitude and phase modulation mode. The amplitude modulation mode is a fast in-plane switching of the device optic axis that enables to achieve a high percent of modulation of the transmitted light intensity whereas the phase mode gives a continuous change of the refractive index and thus of the phase shift of the transmitted light. By using a small concentration of diacrylate monomer and selecting the illumination conditions we have been able to create a inhomogeneous polymeric network mostly localized at both substrate surfaces and stabilize the two switching modes.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.1220-1222
• /
• 2004

We developed a new device structure using anisotropic phase separation from liquid crystal (LC) and polymer composite materials using UV intensity variation and polymer wetting properties. In the device, the LC molecules are isolated in pixels where LCs are surrounded by the inter-pixel vertical polymer walls and the horizontal polymer films on the upper substrate. These devices show very good mechanical stability against external pressure. The electro-optic characteristics and the mechanical stability of the devices are discussed in view of the flexible display applications.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.615-618
• /
• 2003

We developed a new device structure using anisotropic phase sepraration from liquid crystals (LCs) and polymer composite materials for flexible display applications. In the device, the LC molecules are isolated in pixels where LCs are surrounded by polymer layers. These devices show very good mechanical stability against external pressure. The electro-optic characteristics and the mechanical stability of the devices are discussed in view of the flexible display applications.

• 대한전자공학회논문지
• /
• 제25권1호
• /
• pp.94-100
• /
• 1988

To improve the switching time of active optical bistable devices, we propose an active optical bistable device that consists of a diode laser, a transistor, and a photodetector. By implementing the proposed device we realize the optical bistable device with a 5 nanosecond switching time. This is the fastest switching time among the hybrid type optical bistable devices. It is also experimentally demonstrated that the proposed device may be used in an optical disc pick up.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.651-654
• /
• 2007

Anthracene derivatives, 9,10trimethylsilylanthr - acene(SA) and bis(2-phenylethynyl)trimethylsilyl anthracene(Si-BPEA) were synthesized and their emission properties were studied with UV and PL spectrometers. The PL maxima of anthracene, SA, bis(2-phenylethynyl)anthracene (BPEA), Si-BPEA were obtained at 401, 438, 475, 478nm, respectively. The electro-optical properties OLED devices made with these anthracene derivatives were discussed.

• 비파괴검사학회지
• /
• 제34권5호
• /
• pp.362-368
• /
• 2014

광섬유센서는 전자파 무간섭, 부식 방지, 다중화 등의 장점들을 갖고 있어 다양한 상태 감시 시스템을 위한 연구에 많이 활용되고 있다. 본 논문에서는 광섬유센서 기반의 인체 근육 상태 감시 시스템을 제안한다. 상용화되어 있는 인체 상태 감시 센서는 전자기 기반의 센서가 대부분이다. 이는 전자기 간섭 및 왜곡의 우려가 있어, 이를 보완하고 장치의 간소화 및 사용자 편의성을 위해 광섬유 브래그 격자센서를 사용하였다. 근육 상태의 지표가 되는 근육 수축 및 이완을 측정하기 위해 원주방향으로의 운동 감시가 가능한 밴드형태의 광섬유 브래그 격자센서 모듈을 제작하였다. 그리고 광섬유 브래그 격자센서 모듈의 적용성 평가를 위해 단축 인장시험을 수행하였다. 실험 결과 인장 크기에 따른 브래그 파장 변화가 상호 연관성을 보였으며, 이를 통해 브래그 격자센서 기반의 근육 상태 감시 시스템 개발의 가능성을 확인하였다.

• ETRI Journal
• /
• 제24권4호
• /
• pp.259-269
• /
• 2002

Polymers are emerging as new alternative materials for optical communication devices. We developed two types of polymer-based devices for optical communications. One type is for ultra high-speed signal processing that uses nonlinear optical (NLO) polymers in such devices as electro-optic (EO) Mach-Z${\ddot{e}} $ hnder (MZ) modulators and EO 2${\times}$2 switches. The other is for WDM optical communications that use low-loss optical polymers in such devices as 1${\times}$2, 2${\times}$2, 4-arrayed 2${\times}$2 digital optical switches (DOSs) and 16${\times}$16 arrayed waveguide grating (AWG) routers. For these devices, we synthesized a polyetherimide-disperse red 1 (PEI-DR1) side chain NLO polymer and a low-loss optical polymer known as fluorinated polyaryleneethers (FPAE). This paper presents the details of our development of these polymeric photonic devices considering all aspects from materials to packaging.