• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.4
• /
• pp.547-554
• /
• 2016

Analyze the customer daily load patterns, be used to determine the optimal charging and discharging schedule which can minimize the electrical charges through the battery energy storage system(BESS) installed in consumers is an object of this paper. BESS, which analyzes the load characteristics of customer and reduce the peak load, is essential for optimal charging and discharging scheduling to save electricity charges. This thesis proposes optimal charging and discharging scheduling method, using particle swarm optimization (PSO) and penalty function method, of BESS for reducing energy charge. Since PSO is a global optimization algorithm, best charging and discharging scheduling can be found effectively. In addition, penalty function method was combined with PSO in order to handle many constraint conditions. After analysing the load patterns of target BESS, PSO based on penalty function method was applied to get optimal charging and discharging schedule.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.2
• /
• pp.292-300
• /
• 2015

This paper proposes a high-efficiency, dual-mode PWM / linear buck converter with a wide-input range. The proposed converter was designed with a mode selector that can change the operation between PWM / linear mode by sensing a load current. The proposed converter operates in a linear mode during a light load and in PWM mode during a heavy load condition in order to ensure high efficiency. In addition, the mode selector uses a bit counter and a transmission gate designed to protect from a malfunction due to noise or a time-delay. Also, in conditions between $-40^{\circ}C$ and $140^{\circ}C$, the converter has variations in temperature of $0.5mV/^{\circ}C$ in the PWM mode and of $0.24mV/^{\circ}C$ in the linear mode. Also, to prevent malfunction and breakdown of the IC due to static electricity, the reliability of IC was improved by embedding a self-produced 8 kV-class(Chip level) ESD protection circuit of a P-substrate Triggered SCR type with high robustness characteristics.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.11
• /
• pp.55-62
• /
• 2018

To receive financial support for the Green Remodeling, applicants must submit an energy simulation report. However, many of the applicants are not green remodeling specialist and energy simulation services are too expensive for them. For this reason, this study was to develop an energy simulation program to enhance green remodeling for the non-specialist such as housewives. Firstly, to enhance understanding and accessibility improvement energy simulation, simulation process was designed four steps and reducing input data. Specifically, input data was reduced by categorizing the following for the area, plan type, hot water load, electricity load, statistical inference. And then, to accurately verify the calculation result, the heat and hot water demand were derived and compared with ECO2 and Energy # program. Lastly, the calculation shows that there is a difference of 4% for the heat load and 15% to 33% for the hot water load respectively.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.16 no.4
• /
• pp.9-15
• /
• 2020

In this study, effect of reinforced insulation on heating and cooling loads were studied due to installation of PV panels on factory building roof with a floor area of 12,960 m². For PV panel installation, combination of aluminum, polyurethane, air, polystyrene and steel materials were added to the original roof, which increased thermal insulation performance. Half of the roof were covered with PV panel and the other half without. Temperature and relative humidity were measured for 8 days during summer season for both indoor spaces. PV panel showed the effect of lowering the indoor space temperature by 0.6℃. TRNSYS dynamic simulation showed that with PV panel, cooling load per area is reduced by 1.7 W/m² and heating by 10.0 W/m². PV panels installed on building roof not only generate electricity but also can save energy by reducing cooling and heating loads.

• Proceedings of the KIEE Conference
• /
• 2000.11a
• /
• pp.46-48
• /
• 2000

This paper presents an approach to B/C analysis amenable to evaluate the impact of DSM programs especially on the strategic conservation programs and the load management programs. The proposed approach embedding the existing B/C analyses is applicable to the new electricity market Case studies show the B/C ratio and the avoided cost due to the impact of DSM programs.

• Proceedings of the KIEE Conference
• /
• 2000.11a
• /
• pp.190-192
• /
• 2000

This paper presents an approach to B/C analysis amenable to evaluate the impact of DSM programs especially on the strategic conservation programs and the load management programs. The proposed approach embedding the existing B/C analyses is applicable to the new electricity market. Case studies show the B/C ratio and the avoided cost due to the impact of DSM programs.

• Proceedings of the KIEE Conference
• /
• 1999.07c
• /
• pp.1202-1204
• /
• 1999

This paper proposes a value-based pricing suitable for deregulation situation in electricity market, where the value is measured based on the service quality such as system reliability. The proposed approach makes it possible to maximize social welfare, in that diversified service can produce the optimal combination set of demand and supply. The proposed pricing can also be applied to a direct load control.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.03b
• /
• pp.11-11
• /
• 2010

Recently, annual usage of energy is dramatically increasing by industrialization is going faster and more electricity is needed due to various electronic devices. This paper present relationships between the Vmax, $V_T$, load and time constant of solar cell charge and discharge curve. Charging and discharging recording where the external resistance will become larger Vmax, $V_T$ is decrease and the time increases and decreases there is a possibility of knowing.

• Proceedings of the KIEE Conference
• /
• 2001.07a
• /
• pp.556-558
• /
• 2001

전압 주파수 부하 모형 추정에 사용되어 이전의 정임피던스, 정전류, 정전력 부하모형에 비해 향상된 결과를 얻었던 다항식형 부하 모형을 전력가격 부하 모형에도 적용하여 새로운 다항식 부하 모형을 제안하고, 우리나라의 전력 가격과 사용량 자료를 이용하여 부하 모형의 계수를 결정하였다. 부하의 종류별, 시간대별로 추정된 부하 모형에 부하의 구성 비율을 가중하면 결국 전체 부하 모형이 구해진다. 구해진 부하 모형은 전력 시장이 도입된 경쟁체제에서 전력의 가격 결정에 사용될 수 있을 것이다.

• Proceedings of the KIEE Conference
• /
• 2005.11c
• /
• pp.131-135
• /
• 2005

Stabilization of electric power is the most important thing is such place as computing center having business critical equipment. However, ability to cope with electrical quality shift and power failure is very weak from UPS output side to load in those electricity system, though UPS is generally used for power stabilization. this problem can be solved by duplication of power source using newly configured UPS and small sized transfer switch even in case of UPS failure.