• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1442-1446
• /
• 2006

In this paper, the response surface modeling of the pretilt angle control in the nematic liquid crystal (NLC) on the homogeneous polyimide surface with different surface treatment is investigated The rubbing strength and the hard baking temperature are considered as input factors. After the design of experiments is performed, the process model is then explored using the response surface methodology. The analysis of variance is used to analyze the statistical significance and the effect plots are also investigated to examine the relationship between the process parameters and the response.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.71-72
• /
• 2000

The design of large area thin film transistor liquid crystal displays (TFT-LCDs) requires consideration of cross-talks between the data lines and pixel electrodes. These limits are imposed by the mutual coupling capacitances present in a pixel. The mutual coupling capacitance causes a pixel voltage error. In this study, semi-empirical model, which is adopted from VLSI interconnection capacitance calculations, is used to calculate mutual coupling capacitances. With calculated mutual coupling capacitances and arbitrary given image pattern, the root mean square (RMS) voltage of pixel is calculated to see vertical cross-talk from the first to the last column. The information obtained this study can be utilized to design the larger area and finer image quality panel.

• Annual Conference of KIPS
• /
• 2015.10a
• /
• pp.1411-1412
• /
• 2015

Detection of road lanes is an important technology, which is being used in autonomous vehicles from last few years. This method is very helpful and supportive for the drivers to provide them safety and to avoid road accidents. Alot of methods are being used to detect road lane markings. We can categorize them into three major categories: sensor-based, feature-based, and model-based methods. And in this study we give the comprehensive survey on lane marking techniques.

• Annual Conference of KIPS
• /
• 2015.10a
• /
• pp.1408-1410
• /
• 2015

Information about the painted road markings and other painted road objects play an important part in keeping safety of drivers. Some researchers have presented research approaches and dealt with road markings detection. In this paper, we present comprehensive survey of these techniques, and review some of them like a machine learning method, template matching method for road markings detection and classification, method of detection and classification of road markings using curve-based prototype fitting, signed edge signature method.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.5
• /
• pp.1179-1189
• /
• 2016

• Proceedings of the IEEK Conference
• /
• 2001.06b
• /
• pp.233-236
• /
• 2001

We have designed and fabricated ASK modulator MMIC operating at 5.8GHz for OBE used in AGPS (Automatic Gate Passing System). ASK modulator MMIC was designed to apply a sing1e supply voltage of 3V to the drain in order to decrease ACP (Adjacent Channel Power). The measurement result of this chip exhibits on/off characteristic over 30dB. The design parameters are optimized through ADS simulation tool. The layouts and fabrication o( ASK Modulator MMIC were designed and fabricated by using ETRI 0.5${\mu}{\textrm}{m}$ MESFET library. The chip sizes were 1mm $\times$1mm. The performance analysis of the implemented ASK Modulator based on the design parameters is accomplished.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.388-391
• /
• 2008

A new reset waveform with negative ramp pulse was proposed. Comparative experiments between the negative and positive waveforms were performed. During reset period, IR distributions and luminance of black and white conditions were measured with the 42-inch XGA PDP module. The negative waveform improved contrast ratio about 15.4 ~ 22.5 % than the positive waveform by lowing the black luminance in reset period. Z bias (= Vbb) of the positive waveform was 27 V higher than the negative waveform.

• Annual Conference of KIPS
• /
• 2014.04a
• /
• pp.834-835
• /
• 2014

Determination of banknote fitness is an important and challenging task, which classifies used banknotes whether are suitable for recirculation or should be replaced by new ones. Many researches on solving this problem have been conducted on various types of banknote, based on using optical sensors and discrimination algorithms. In this study, we give a review on the previous works on banknote fitness classification.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1644-1645
• /
• 2011

초고주파 영역에서 전자파 영향을 감소시키기 위해 IED의 개구면에 대하여 (1+1) 진화전략 기법을 이용하여 최적 설계 연구를 수행하였다. 함체 재질이 ABS 수지와 steel-stainless의 경우에 대하여 개구면의 최적 설계를 수행하였다. 진화전략 기법을 이용하여 개굼녀의 최적 설계 결과 개구면의 크기가 감소하면서 상단에 위치할 때 고주파에서 PCB에 유기되는 전계가 약 47% 감소하는 것을 확인 할 수 있었다.

• Proceedings of the Korea Institutes of Information Security and Cryptology Conference
• /
• 2006.06a
• /
• pp.273-277
• /
• 2006

홈네트워크는 무궁한 발전 가능성을 가지고 있으면서 동시에 여러 분야의 기술들을 유기적으로 결합하여 사용하기 때문에 기존의 네트워크 서비스에서 가지고 있던 보안 취약성에 그대로 노출되어 있다. 또한 요소기술 및 환경 등의 특성으로 홈네트워크 정보기기에 대한 불법적인 공격이 빈번하게 발생한 수 있다. 홈네트워크 산업을 활성화시키기 위해서는 이기종 망간의 상호연동 기술은 물론 관리적 측면에서의 기술과 통합 측면에서의 기술 등이 필요하고 정보의 처리, 전달 및 저장을 안전하게 하기 위해서는 특히 보안 기술이 절실히 요구된다. 따라서 본 논문에서는 프라이버시, 네트워크, 서비스, 인프라, 미들웨어 및 디바이스의 측면으로 나누어서 홈네트워크에서의 보안 취약점을 분석하고, 홈네트워크 환경에서의 보안 요구사항을 도출함으로써 이와 같은 보안 위협으로부터의 대응방안을 제시한다.