• Title/Summary/Keyword: Electrical tree

Search Result 589, Processing Time 0.026 seconds

Signal Processing for Perpendicular Recording Systems

  • Lee, Jun;Woo, Choong-Chae
    • Journal of IKEEE
    • /
    • v.15 no.1
    • /
    • pp.70-75
    • /
    • 2011
  • Longitudinal recording has been the cornerstone of all two generations of magnetic recording systems, FDD and HDD. In recent, perpendicular recording has received much attention as promising technology for future high-density recording system Research into signal processing techniques is paramount for the issued storage system and is indispensable like longitudinal recording systems. This paper focuses on the performance evaluation of the various detectors under perpendicular recording system. Parameters for improving the their performance are examined for some detectors. Detectors considered in this work are the partial response maximum likelihood (PRML), noise-predictive maximum likelihood (NPML), fixed delay tree search with decision feedback (FDTS/DF), dual decision feedback equalizer (DDFE) and multilevel decision feedback equalizer (MDFE). Their performances are analyzed in terms of mean squared error (MSE) and noise power spectra, and similarity between recording channel and partial response (PR) channel.

An Expert System for Optimal Network Reconfiguration in Distribution Systems (배전계통의 최적 회로재구성을 위한 전문가 시스템)

  • Yoon, Yong-Han;Kim, Jae-Chul;Jang, Jeong-Tae
    • Proceedings of the KIEE Conference
    • /
    • 1991.11a
    • /
    • pp.71-74
    • /
    • 1991
  • This paper is described an expert system which performs the network reconfiguration in order to operate distribution systems optimally using heuristic rules. The proposed network reconfiguration is able to not only eliminate abnormal states such as overload of transformers/lines and low voltage violation, but also achieve minimum power loss and optimum load balancing under normal states. In order to apply the network reconfiguration efficiently, an expert system is adopted a best-first tree searching strategy on the basis of heuristics, and is implemented in AI language Turbo PROLOG. Several examples are used to illustrate concepts described above.

  • PDF

A Pulse Width Modulation(CPWM) Technique with Chaos Phenomenon (혼돈 특성을 갖는 펄스폭 변조(CPWM)방식)

  • Kim, J.N.;Kim, J.H.;Jung, Y.G.;Lim, Y.C.
    • Proceedings of the KIEE Conference
    • /
    • 2006.04b
    • /
    • pp.270-274
    • /
    • 2006
  • This paper proposes a Chaos Pulse Width Modulation(CPWM) technique. For generating the chaotic numbers by chaos phenomenon, chaos area $\lambda$=0.99 in bifurcation tree of the proposed double tent mapping is used. A micro-controller is used for the generation of chaos numbers and triangular carrier with chaotic frequency is obtained through the process of frequency modulation according to the generated chaos numbers. The experiments are executed with the 1.5kw induction motor coupled with a 2.5A load. The experimental results show that the voltage / current spectra are spread to a chaotic range, and the switching noise of motor is reduced by the proposed method compared to the fixed frequency PWM method.

  • PDF

An Action Selection Mechanism and Learning Algorithm for Intelligent Robot (지능로봇을 위한 행동선택 및 학습구조)

  • Yoon, Young-Min;Lee, Sang-Hoon;Suh, Il-Hong
    • Proceedings of the KIEE Conference
    • /
    • 2004.11c
    • /
    • pp.496-498
    • /
    • 2004
  • An action-selection-mechanism is proposed to deal with sequential behaviors, where associations between some of stimulus and behaviors will be learned by a shortest-path-finding-based reinforcement team ins technique. To be specific, we define behavioral motivation as a primitive node for action selection, and then sequentially construct a network with behavioral motivations. The vertical path of the network represents a behavioral sequence. Here, such a tree fur our proposed ASM can be newly generated and/or updated. whenever a new sequential behaviors is learned. To show the validity of our proposed ASM, some experimental results on a "pushing-box-into-a-goal task" of a mobile robot will be illustrated.

  • PDF

A study on the A.C. breakdown characteristics of cross-linked polyethylene dielectrics subjected to the impulse fatigue (충격피로를 받은 가교폴리에틸렌 유전체의 교류절연파괴 특성에 관한 연구)

  • 곽영순;손제봉
    • 전기의세계
    • /
    • v.29 no.9
    • /
    • pp.577-583
    • /
    • 1980
  • This paper is intended to analyze the characteristics of breakdown of polyethylene dielectrics, which was caused by A.C. voltage after impulse fatigue, by using weibull distribution. The impact of impulse fatigue upon the accurance and development of tree and the impact of void upon treeing are investigated. From the results of experiment, it is found that the life of polyethylene subjected to impulse voltage is shorter than that not subjected to impulse voltage. And in the case of void existence, it's life comes to be short remarkably, and the breakdown is almost concentrated on its initiation. From the results observed by the microscope, it is found that the treeing phenomena varies according as whether impulse voltage was applied to polyethylene before being applied to A.C. voltage and whether polyethylene has void or not.

  • PDF

On-Line Cable Water-Tree Detection by the Analysis of Pre-Discharge Signals (미세 방전신호 분석을 통한 케이블 수(水)트리 활선 현장진단)

  • Chung, Sang-Jin;Kim, Young-Min
    • Proceedings of the KIEE Conference
    • /
    • 2008.09a
    • /
    • pp.6-8
    • /
    • 2008
  • 배전케이블 수 트리 현상은 XLPE케이블의 고장을 초래하는 주요원인이다. 수 트리에 기인한 신호는 아주 미세하여 현장진단은 배경 잡음으로 인해 검출이 어렵다. 본 논문에서는 고주파특성이 우수한 L-C결합센서를 사용하여 방전신호를 측정하고 이를 주파수영역에서의 분석을 통해 현장에서 부분방전이 발생하기 훨씬 이전에 존재하는 미세신호(Pre-Discharge)를 검출하고 분석한 결과를 제시하였다. 케이블 내 수(水) 트리가가 존재하면 이것이 이종 절연물의 경계면 역할을 하석 서-지 임피던스의 차이로 인해 케이블 단자에서 발생하는 전기적 신호가 수 트리 지점에서 다수의 반사를 일으켜 그 잡음 수준을 높이는 역한을 하게 되는 것으로 알려져 있다. 만일 여러 개소에 수 트리가 존재하는 경우에는 그 배경잡음을 현저하게 높이는 결과를 보여주었다. 실험실에서 발생하는 미세 신호와 현장의 신호를 비교한 결과 아주 유사한 패턴이 있음이 파악되어 이 방법은 수 트리의 활선 진단이 가능함을 확인시켜 주었다.

  • PDF

Design and Implementation of a Recovery Method for High Dimensional Index Structures (고차원 색인구조를 위한 회복기법의 설계 및 구현)

  • Song, Seok-Il;Lee, Seok-Hui;Yu, Jae-Su
    • The Transactions of the Korea Information Processing Society
    • /
    • v.7 no.7
    • /
    • pp.2008-2019
    • /
    • 2000
  • In this paper, we propose a recovery method for high dimensional index structures. It recovers efficiently transactions including reinsert operations that needs undo or rollback due to system failures or transaction failures. It is based on WAL(Write Ahead Logging) protocol. We apply the method to the FCIR-Tree and implement it based on MiDAS-III which is the storage system of a multimedia DBMS, called BADA-III. We also show through performance evaluation that the recovery method with our algorithm recovers reinsert operations efficiently over that without our algorithm.

  • PDF

An Experimental investigation on the dependation characteristics of CN/CV cables : dependence on the materials and curing process (배전용 CN/CV 케이블의 절연재료 및 가교방식별 열화특성연구)

  • Kim, H.J.;Choi, Y.H.;Ahn, Y.K.;Kim, K.S.;Koo, J.Y.
    • Proceedings of the KIEE Conference
    • /
    • 1992.07b
    • /
    • pp.969-972
    • /
    • 1992
  • It is shown that the ac breakdown strength, treeing phenomena, oxidation level, and crystallinity of unaged and aged distribution CV cables vary with XLPE insulations (characterizing anti-oxidation) and curing process. The maximum size of bow-tie tree in insulation influenced on the decrease of ac breakdown strength and the increase of oxidation level and crystallinity of XLPE according to aging time lead to increase the size and density of bow-tie trees.

  • PDF

A Structure Distributed Processing Method in Data Flow Systems (Data Flow 시스템에서 구조체 분산 처리 방식)

  • Maeng, S.Y.;Hyun, W.M.;Ha, Y.H.;Lim, I.C.
    • Proceedings of the KIEE Conference
    • /
    • 1987.07b
    • /
    • pp.1125-1128
    • /
    • 1987
  • This paper proposes a method which distributes the structure data represented by a tree and handles it. To distribute and handle the structure data, this method partitions a structure data and distributes the partitioned structure in multiple processing element and allocates the partitioned structure. Each processing element includes the structure memory to store the partitioned structure and the structure controller to handle efficiently the distributed structure. As the structure is distributed and is stored in the structure memory and is handled by the structure controller, the processing time is reduced.

  • PDF

A CHARACTER RECOGNITION SYSTEM BASED ON SYNTACTIC APPROACH (인쇄체 영문의 구문론적 인식)

  • Park, Dong-Choon;Park, Sung-Han
    • Proceedings of the KIEE Conference
    • /
    • 1987.07b
    • /
    • pp.1598-1601
    • /
    • 1987
  • This paper proposes a new set of topological features (primitives) for use with a syntactic recognizer for high-accuracy recognition of printed alphanumeric characters. The recognition is accomplished on nine character groups, where each group has different combinations of four feature points. A skeleton enhancement eliminating isolated points and smoothing irregular points is developed. The tree automata processed in parallel enables the realization of high-recognition speeds and font-type independent recognition. The proposed character recognition system is tested for alphanumeric character fonts of dot matrix printer and plotter using IBM-PC/XT.

  • PDF