• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권10호
• /
• pp.630-638
• /
• 2005

In FIR (Finite Impulse Response) filter applications, Nth-band F]U digital filters are known to be important due to their reduced computational requirements. The conventional methods for designing F]U filters use iterative approaches such as the well-known Parks-Mcclellan algorithm. The Parks-Mcclellan algorithm is also used to design Nth-band FIR digital filters. But a disadvantage of the Parks-Mcclellan algorithm is that it needs a good amount of design time. This paper describes a direct design method for Nth-band FIR Filters using Chebyshev polynomials, which provides a reduced design time over indirect methods such as the Parks-Mcclellan algorithm. The response of the resulting filter is equiripple in passband. Our proposed method produces a passband response that is equripple to within a minuscule error, comparable to that of the Parks-Mcclellan algorithm.

• 전기학회논문지
• /
• 제57권7호
• /
• pp.1195-1199
• /
• 2008

In this paper, peak detector of generator's output voltage and variable gain controller are introduced for a fast dynamic response. The conventional r,m.s, signal detected has inherent time delay, and the dynamic response of generator using conventional PID controller has some problem in sudden load change. In this paper, the peak detector and signal selector with variable gain controller is used to overcome this problem. The main controller can check the voltage state from the peak detector. When a sudden load change, the over-voltage and under-voltage signal from peak detector change the controller's gain and exciter's current reference. The proposed scheme can improve the dynamic response, which is verified from experimental test of 200kW diesel engine-generator.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
• /
• pp.9-10
• /
• 2000

The wide viewing angle and fast response time characteristics of negative dielectric anisotropy nematic liquid crystal (NLC) using a novel vertical-alignment (VA) - 1/4 ${\pi}$ cell mode on a homeotropic alignment layer were investigated. Good voltage-transmittance curves and low driving voltage using the novel VA - 1/4 ${\pi}$ cell mode without a negative compensation film were obtained. The iso-viewing angle characteristics of NLC using the novel VA - 1/4 ${\pi}$ cell mode without a negative compensation film can be achieved. The fast response time of 24.4 ms in NLC was successfully measured. The iso-viewing angle, fast response time, and low driving voltage characteristics using the novel VA - 1/4 ${\pi}$ cell mode can be achieved.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.180-182
• /
• 1996

In this study, we have investigated the characteristics of the response time and the viewing angle on twisted nematic (TN)-liquid crystal display (LCD) and amorphous (a) TN-LCD without rubbing. To measure the transmission-voltage, response time, and viewing angle characteristics, we prepared three kinds of LC cells and then studied the surface liquid crystal alignment effect. We studied that the response time on a-TN-LCD is fast compared to the TN-LCD. We suggest that the weak anchoring strength is attributed to the fast response time on a-TN-LCD. Also, we obtained the uniform viewing angle characteristics on a-TN-LCD. From these results, we consider that the liquid crystal alignment on LCD device are very important factor for electro-optical characteristics.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.549-552
• /
• 1999

We have developed an novel vertical-alignment (VA) - $\pi$ cell mode that provides a wide viewing angle and fast response times for negative dielectric anisotropy nematic liquid crystal (NLC) on a homeotropic polyimide (PI) surfaces. We had the good voltage-transmittance curves and low driving voltages were achieved with the novel VA - $\pi$ cell mode without negative compensation film. Iso-viewing angle characteristics using the novel VA - $\pi$ cell mode without negative compensation film of NLC was also successfully observed. As well a fast response time of 31.7ms for the novel VA - $\pi$ cell mode was measured. Consequently, It is seen that by using the novel VA - $\pi$ cell mode the iso-viewing angle, fast response time, and low driving voltage characteristics can be achieved.

• 전기학회논문지
• /
• 제60권2호
• /
• pp.423-430
• /
• 2011

In adaptive filtering, the sparseness of impulse response and input signal characteristics are very important factors of it's performance. This paper presents a subband improved proportionate normalized least square (SIPNLMS) algorithm which combines IPNLMS for impulse response sparseness and subband filtering for prewhitening the input signal. As drawing and combining the advantage of conventional approaches, the proposed algorithm, for impulse responses exhibiting high sparseness, achieve improved convergence speed and tracking ability. Simulation results, using colored signal(AR(4)) and speech input signals, show improved performance compared to fullband structure of existing methods.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.343-346
• /
• 2000

This paper presents the characteristics of low consumption, high-response time hot-film type micro-flowsensors with SOI(Si-on-insulator) and trench structures. Output voltages increased due to increase of heat-loss from sensor to external. Compared with no-trench on the SOI structure, the micro-flowsensors with trench structures have properties of high output voltage and low consume power. Output voltage of micro-flowsensors with SOI and trench structures was 250 mV at $N_2$ flow rate of 2000 sccm/min, heating power of 0.3 W. The response time was about 85 msec when input flow was step-input.

• 전기학회논문지
• /
• 제57권8호
• /
• pp.1342-1348
• /
• 2008

One important objective of the electricity market is to decrease the price by ensuring stability in the market operation. Interconnected to this is another objective; namely, to realize sustainable consumption of electricity by equitably distributing the effects and benefits of participating in the market among all participants of the industry. One method that can help achieve these objectives is the ^{(R)}$demand-response program, - which allows for active adjustment of the loadage from the demand side in response to the price. The demand-response program requires a customer baseline load (CBL), a criterion of calculating the success of decreases in demand. This study was conducted in order to calculate undistorted CBL by analyzing the correlations between such external or seasonal factors as temperature, humidity, and discomfort indices and the amounts of electricity consumed. The method and findings of this study are accordingly explicated.

• 전기학회논문지
• /
• 제65권7호
• /
• pp.1128-1134
• /
• 2016

Demand response provides customer load reductions based on high market prices or system reliability conditions. One type of demand response, price-based program, induces customers to respond to changes in product rates. However, there are large-scale general and industrial customers that have difficulty changing their energy consumption patterns, even with rate changes, due to their electricity demands being commercial and industrial. This study proposes an in-house pricing model for large-scale general and industrial customers, particularly those with multiple business facilities, for self-regulating demand-side management and cost reduction. The in-house pricing model charges higher rates to customers with lower load factors by employing peak to off-peak ratios in order to reduce maximum demand at each facility. The proposed scheme has been applied to real world and its benefits are demonstrated through an example.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.422-423
• /
• 2006

We have studied phase transition time and response time of optically compensated splay(OCS) cell as a function of surface pretilt angle. With decreasing surface pretilt angle, phase transition time decreases and response time becomes faster in the OCS cell. Besides, the more surface pretilt angle decreases, the easier OCS structure is obtained.