• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 춘계학술대회 논문집
• /
• pp.111-114
• /
• 1995

This paper describes the imidization of PAAS(polyamic acid alkylamine salts) Langmuir-Blodgett (LB) films and the electrical properties of PAAS and polyimide(PI) LB films, The imidization conditons were investigated by TGA(Thermal Gravi-tational Analysis). FT-IR and UV/ visible absorption spectra. A thermal imidiczation was peformed at 300$^{\circ}C$ for 1 hour. The electrical properties of the PAAS and polymide LB films were measured by current-voltate(L-V) characteristics It shows that the electrical condcutivity of PL LB films is about 10 $\^$-15/S/cm which is two orders of magnetiude lower than that of the PAAS LB films A Schottky effect was also observed in both films.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1999년도 제14차 학술회의논문집
• /
• pp.121-124
• /
• 1999

Subspace-based state space system identification (4SID) methods have been demonstrated to per-form well in a number of applications, but the properties of these have not been fully analyzed or understood yet. For applying the methods, no assumptions on structure of realization are needed and any coordinate transformation is allowed for the estimates. This is one reason why many kinds of properties expected for identification procedures have not been clarified yet. We illustrate, by using Schur complement, an interpretation of the R matrix yielded by the QR factorization in the 4SID procedure. The results in this paper can be useful for analysis of properties of parameters obtained by 4SID methods.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.259-260
• /
• 2008

In this paper, we fabricated elastomer epoxy specimens by added liquid elastomer to improve the mechanical and electrical properties instead of previous high-voltage epoxy materials. As increased additive contents, glass transient temperature (Tg) was continually decreased in DSC (differential scanning calorimetry). Among specimens, 15 phr sample showed the mechanical and electrical properties similar of high-voltage epoxy in modulus, break-down and arc test. From the optimized condition of elastic epoxy, we confirmed a chance of application for high-voltage materials and power electrical instruments.

• 전기학회논문지
• /
• 제62권2호
• /
• pp.213-218
• /
• 2013

In this study, epoxy/mica composite was prepared by mixing with mechanical stirrer together with homogenizer, and the effect of amino-type silane coupling agent was also studied. To reduce the viscosity without any decrement of other properties, 1,4-Butanediol diglycidyl ether (1,4-BDGE) as an aliphatic epoxy reactive diluent was introduced to the epoxy/mica composite in order to use as vanish for high voltage motor and generator stator winding. It was confirmed by scanning electron microscopy (SEM) observation that interfacial characteristics between organic epoxy and inorganic mica was modified by coupling agent treatment so that glass transition temperature increased, and tensile strength and electrical breakdown strength increased. The properties were estimated by Weibull statistical analysis and the ac electrical breakdown strength was 20.2% modified by treating silane coupling agent.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 C
• /
• pp.941-943
• /
• 1999

In this paper, the AC breakdown properties to investigate the electrical properties of gate oxide layer in MOSFET was studied. 5 inch arsenic epi-wafer is selected as an experimental specimen, the power MOSFET of a general MOS structure was made. In order to analyze the physical properties of the specimen, the SIMS(secondary ion mass spectroscopy) was used. As the experimental condition, the experiment al of the AC breakdown characteristics was performed when the thickness of gate oxide layer is $600[\AA]$ and $800[\AA]$, the resistivity is $1.2[\Omega{\cdot}cm]$, $1.5[\Omega{\cdot}cm]$ and $1.8[\Omega{\cdot}cm]$, and the diffusion time is 110[min] and 150[min] in temperature $30[^{\circ}C]{\sim}100[^{\circ}C]$. From the analysis result of the SIMS spectrum, it is confirmed that the dielectric strength is decreased by contribution of the impurities ad dition as increasing in thickness of the gate oxide layer in MOSFET.

• The Korean Journal of Ceramics
• /
• 제6권2호
• /
• pp.107-109
• /
• 2000

The crystallization process and the electrical properties of amorphous tin-doped indium oxide (ITO) films have been studied in contrast with those of undoped indium oxide (IO) films. Amorphous ITO and IO films were prepared by magnetron sputtering succeeded by annealing in the air at various temperatures. ITO films showed higher crystallization temperature compared with that of IO films, suggesting an excess free energy caused by the repulsion between the active donors ($Sn^{4+}$). The analysis of the electrical properties alternated with the phased annealing of films provided essential information for understanding the conduction mechanisms of ITO. It was also revealed that the amorphous IO/ITO films showed oxidation around $100^{\circ}C$ in contrast with crystalline IO/ITO films with the oxidation temperature above $200^{\circ}C$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.1057-1059
• /
• 2002

ZnO-Si-ZnO multi-layer thin films have been deposited by pulsed laser deposition (PLD). And then, the films have been annealed at $300^{\circ}C$ in oxygen ambient pressure. Electrical properties of the films were improved slightly than ZnO thin film without Si layer. Also, the optical and structural properties changed by Si layer in ZnO thin film. The optical and structural properties of Si-doped ZnO thin films were characterized by PL(Photoluminescence) and XRD(X-ray diffraction method) respectively. Electrical properties were measured by van der Pauw Hall measurements.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2014년도 제50차 하계학술대회논문집 22권2호
• /
• pp.389-390
• /
• 2014

The electrical conduction properties in oriented polypropylene(OPP) were studied over the electric field intensity between 10[MV/m] and 300[MV/m] at the range of temperature from $5[^{\circ}C]$ to $55[^{\circ}C]$ in this study. The range of electrical conduction properties observed at $15[^{\circ}C]$ were divided into five regions with increasing electric field intensity. Particularly, voltage-controlled negative resistance was shown in the region from 70[MV/m] to 82[MV/m].

• Safety and Health at Work
• /
• 제11권4호
• /
• pp.405-417
• /
• 2020

Background: Electrical socket outlets are used continuously until a failure occurs because they have no indication of manufacturing date or exchange specifications. For this reason, 659 electrical fires related to electrical socket outlets broke out in the Republic of Korea at 2018 only, an increase year on year. To reduce electrical fires from electrical socket outlets, it is necessary to perform an accelerated test and analyze the thermal, insulation resistance, and material properties of electrical socket outlets by installation years. Methods: Thermal characteristics were investigated by measured the temperature increase of electrical socket outlets classified according to year with variation of the current level. Insulation resistance characteristics was measured according to temperature for an electrical socket outlets by their years of use. Finally, to investigate the thermal and insulation resistance characteristics in relation to outlet aging, this study analyzed electrical socket outlets' conductor surface and content, insulator weight, and thermal deformation temperature. Results: Analysis showed, regarding the thermal characteristics, that electrical socket outlet temperature rose when the current value increased. Moreover, the longer the time that had elapsed since an accelerated test and installation, the higher the electrical socket outlet temperature was. With respect to the insulation resistance properties, the accelerated test (30 years) showed that insulation resistance decreased from 110 ℃. In relation to the installation year (30 years), insulation resistance decreased from 70 ℃, which is as much as 40 ℃ lower than the result found by the accelerated test. Regarding the material properties, the longer the elapsed time since installation, the rougher the surface of conductor contact point was, and cracks increased. Conclusion: The 30-year-old electrical socket outlet exceeded the allowable temperature which is 65 ℃ of the electrical contacts at 10 A, and the insulation resistance began to decrease at 70 ℃. It is necessary to manage electrical socket outlets that have been installed for a long time.

• 농업과학연구
• /
• 제48권4호
• /
• pp.739-751
• /
• 2021

The thawing process is usually essential for imported pork because this product is typically distributed frozen. Consumers prefer fresh pork because discoloration, nutrient spills, and microbial contamination are high during the thawing process. The illegal act of selling frozen pork by disguising it as fresh pork through various methods can occur for the benefit of the difference in the sales price. However, there is some difficulty in securing systematic and objective data, as sensory tests are generally performed on imported pork. In the experiment conducted here, the electrical conductivity and dielectric properties of pork neck and pork belly products were measured. The amounts of change before and after freezing were compared through a statistical analysis, and a new method for determining frozen meat was proposed based on the analysis results. The weight was reduced compared to that before freezing due to the outflow of drips from the thawing process, but there was no difference in the drip loss level due to the thawing method. Vacuum packaging was found to lead to more drip loss than regular packaging, but the difference was not statistically significant. Frozen pork neck meat can be determined by measuring the electrical conductivity in the lean parts and the dielectric characteristic in the fatty parts. Frozen pork belly is determined by measuring the dielectric constant of the part closest to the outer fat layer.