• Electrical & Electronic Materials
• /
• v.12 no.7
• /
• pp.7-11
• /
• 1999

Fully sealed field emission display in size of 4.5 inch has been fabricated using single-wall carbon nanotubes-organic vehicle com-posite. The fabricated display were fully scalable at low temperature below 415$^{\circ}C$ and CNTs were vertically aligned using paste squeeze and surface rubbing techniques. The turn-on fields of 1V/${\mu}{\textrm}{m}$ and field emis-sion current of 1.5mA at 3V/${\mu}{\textrm}{m}$ (J=90${\mu}{\textrm}{m}$/$\textrm{cm}^2$)were observed. Brightness of 1800cd/$m^2$ at 3.7V/${\mu}{\textrm}{m}$ was observed on the entire area of 4.5-inch panel from the green phosphor-ITO glass. The fluctuation of the current was found to be about 7% over a 4.5-inch cath-ode area. This reliable result enables us to produce large area full-color flat panel dis-play in the near future. Carbon nanotubes (CNTs) have attracted much attention because of their unique elec-trical properties and their potential applica-tions [1, 2]. Large aspect ratio of CNTs together with high chemical stability. ther-mal conductivity, and high mechanical strength are advantageous for applications to the field emitter [3]. Several results have been reported on the field emissions from multi-walled nanotubes (MWNTs) and single-walled nanotubes (SWNTs) grown from arc discharge [4, 5]. De Heer et al. have reported the field emission from nan-otubes aligned by the suspension-filtering method. This approach is too difficult to be fully adopted in integration process. Recently, there have been efforts to make applications to field emission devices using nanotubes. Saito et al. demonstrated a car-bon nanotube-based lamp, which was oper-ated at high voltage (10KV) [8]. Aproto-type diode structure was tested by the size of 100mm $\times$ 10mm in vacuum chamber [9]. the difficulties arise from the arrangement of vertically aligned nanotubes after the growth. Recently vertically aligned carbon nanotubes have been synthesized using plasma-enhanced chemical vapor deposition(CVD) [6, 7]. Yet, control of a large area synthesis is still not easily accessible with such approaches. Here we report integra-tion processes of fully sealed 4.5-inch CNT-field emission displays (FEDs). Low turn-on voltage with high brightness, and stabili-ty clearly demonstrate the potential applica-bility of carbon nanotubes to full color dis-plays in near future. For flat panel display in a large area, car-bon nanotubes-based field emitters were fabricated by using nanotubes-organic vehi-cles. The purified SWNTs, which were syn-thesized by dc arc discharge, were dispersed in iso propyl alcohol, and then mixed with on organic binder. The paste of well-dis-persed carbon nanotubes was squeezed onto the metal-patterned sodalime glass throuhg the metal mesh of 20${\mu}{\textrm}{m}$ in size and subse-quently heat-treated in order to remove the organic binder. The insulating spacers in thickness of 200${\mu}{\textrm}{m}$ are inserted between the lower and upper glasses. The Y\ulcornerO\ulcornerS:Eu, ZnS:Cu, Al, and ZnS:Ag, Cl, phosphors are electrically deposited on the upper glass for red, green, and blue colors, respectively. The typical sizes of each phosphor are 2~3 micron. The assembled structure was sealed in an atmosphere of highly purified Ar gas by means of a glass frit. The display plate was evacuated down to the pressure level of 1$\times$10\ulcorner Torr. Three non-evaporable getters of Ti-Zr-V-Fe were activated during the final heat-exhausting procedure. Finally, the active area of 4.5-inch panel with fully sealed carbon nanotubes was pro-duced. Emission currents were character-ized by the DC-mode and pulse-modulating mode at the voltage up to 800 volts. The brightness of field emission was measured by the Luminance calorimeter (BM-7, Topcon).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.7
• /
• pp.16-19
• /
• 2019

A thinner film has superior electrical properties and a better amorphous structure. Amorphous structures can be effective in improving conductivity through a depletion effect. Research is needed on the Schottky contact, where potential barriers are formed, as a way to identify these characteristics. $SiO_2/SnO_2$ thin films were prepared to examine the amorphous structure and Schottky contact, $SiO_2$ thin films were prepared using Ar = 20 sccm. $SnO_2$ thin films were deposited using mixed gas with a flow rate of argon and oxygen at 20 sccm, and $SnO_2$ thin films were added by magnetron sputtering and treated at $100^{\circ}C$ and $150^{\circ}C$. To identify the conditions under which the amorphous structure was constructed, the XRD patterns were investigated and C-V and I-V measurements were taken to make Al electrodes and perform electrical analysis. The depletion layer was formed by the recombination of electrons and holes through the heat treatment process. $SiO_2/SnO_2$ thin films confirmed that the pores were well formed when heat treated at $100^{\circ}C$ and an electric current was applied over the micro area. An amorphous $SiO_2/SnO_2$ thin film with heat treatment at $100^{\circ}C$ showed no reflection at $33^{\circ}\;2{\theta}$ in the XRD pattern, and a reflection at $44^{\circ}2\;{\theta}$. The macroscopic view (-30 V

• Journal of Korean Society of Forest Science
• /
• v.90 no.4
• /
• pp.513-523
• /
• 2001

This study was conducted to investigate influences of solifluction and sediment runoff on the stream water qualities during the spring season. The study sites were four points in the northeastern area of the Bukhansan National Park. And, field surveys were carried out in the spring of 1999, 2000 and 2001. The results of this study were summarized as follows; During the investigation period, the amounts of sediment caused by solifluction on stream side slopes in the downstream were 1.3~1.7 times as large as those in the upstream. The pH of sediment caused by solifluction was a potential influence on the pH of stream water. Amounts of dissolved $Cl^-$, $NO_3{^-}$ and $SO{_4}^{2-}$ in stream water were proportion to the average amounts of $Cl^-$, $NO_3{^-}$ and $SO{_4}^{2-}$ in the sediment caused by solifluction. In the spring, the average pH of stream water was lower than the first class of the river water quality standard because of increasing chemical concentration as well as the contents of anions($Cl^-$, $NO_3{^-}$ and $SO{_4}^{2-}$) in the spring season. Also, the average electrical conductivity of water in downstream was about 2.3-3.3 times higher than that in upstream. The amounts of anions($Cl^-$, $NO_3{^-}$ and $SO{_4}^{2-}$) of water in downstream were about 1.2~7.4, 1.1~3.9, 1.1~1.4 times higher than those in upstream, respectively. Therefore, these results showed that the water quality of downstream was worse than that of upstream. As a result of regression analyses, the linear and exponential equation of pH and water quantity was pH = 1.7926 ${\times}$ stream water quantity + 5.9577($R^2=0.46$), and those of electrical conductivity and water quantity was $EC=34.417e^{3.6334{\times}\text{stream water quantity}(m^3/sec)}$ ($R^2=0.44$).

• The Journal of Engineering Geology
• /
• v.14 no.1
• /
• pp.1-20
• /
• 2004

This study focuses on the hydrochemical characteristics in goundwater affected by reclamation at 2000 Sydney Olympic Games site, Sydney, Australia. The Olympic Games site can be divided into three areas, i.e. reclaimed areas; landfill areas and non-infilled areas. In the current work, 'reclaimed areas' were previously estuarine, and were filled with waste materials and are now above present high tide level, whereas 'landfill areas' are areas where deposition of waste materials occurred above sea level. No deposition of waste took place in 'non-infilled areas'. This study was also evaluated by three different types such as deep boreholes, shallow boreholes and standpipes. The hydrochemishy of groundwaters in reclaimed and non-in-filled areas is characterized by Mg- and Ca-enrichment, whereas groundwaters in landfill areas are elevated in K and NO₃. Na, K and Mg are the dominant cations in groundwater from reclaimed areas and Na and K are the dominant cations in groundwater in landfill areas. Na and Mg are the dominant cations in groundwater in deep boreholes, whereas Na and K are the dominant cations in groundwater in shallow boreholes and standpipes. There is no distinct trend in heavy metals with electrical conductivity in the groundwater between the re-claimed, landfill and non-infilled areas. Fe and Mn in landfill areas with respect to reclaimed areas and non-infilled areas show a distinct increase in concentration with declining pH. Mean electrical conductivity values in the deep and shallow boreholes are higher than that of standpipes, but the minimum and maximum value of electrical conductivity in groundwater in standpipes shows remarkably different value, probably due to perched pond. There is no correlation between Cu, Pb, Zn, Cr concentrations in groundwater with pH, from deep boreholes, shallow boreholes and standpipes, except for Fe and Mn, which demonstrate increasing concentrations with declining pH. The results revealed a close association between elevated concentrations in groundwater and the presence of fill materials at the site. Trace metals teachability from re-claimed soils adjacent to estuary plays a significant role in determining their potential environmental risk to surrounding environment.

• Korean journal of applied entomology
• /
• v.48 no.3
• /
• pp.301-310
• /
• 2009

For the comparing of mortality of the resistance and susceptible population of Myzus persicae, etofenprox was treated in the recommended concentration of 200ppm. Mortalities of resistance population were 16.7 and 36.7%, and susceptible population were 86.7 and 86.7% after 24 and 48 hours treatment, respectively. For the detect of cross resistance to other pyrethroids, 6 pyrethroids were examined. Mortalities of susceptible and resistance populations were 90 and 31% to deltamethrin, 92 and 23% to lambda cyhalothrin, 81 and 14% to cypermethrin, 70 and 20% to $\alpha$-cypermethrin, 29 and 28% to fenpropathrin, 84 and 29% to fenvalerate, respectively. It was showed that resistance populations were generally resistive to other pyrethroids. On the other hands, for recognized ecological characteristic of M. persicae susceptible and resistance populations life table was tested on the pepper leaves in the petri dish and on the plant in the pot. This results were showed that intrinsic rate of increase ($r_m$), net reproduction number ($R_0$) and generation time in day ($T_c$) were significantly different between two population in both tested. However, life span and reproduction period were slightly different between them. Otherwise, feeding behaviors were tested using EPG technique with non- and treated etofenprox. First potential drop time of susceptible and resistance population was 73.5 and 257.9 sec with non-treated and 93.3 and 1076.2 sec after treated, respectively. Electrical probing signals were 8.2 and 48.8 times with susceptible and resistance individuals after treated etofenprox, respectively. It was supposed that the resistance is more probings than susceptible population. After treated, total feeding time have more 6,728.9 sec on resistance than 965.5 sec on susceptible population. So, total non penetration time of susceptible population was 3,000 sec longer than resistance population.

• Korean Chemical Engineering Research
• /
• v.56 no.4
• /
• pp.577-584
• /
• 2018

This study was conducted to investigate the potential of chicken feather (CF), which is a by-product in poultry industry, as a partial substitute of wood fiber in the production of wood-based fiberboard. Keratin-type protein constituted the majority of CF, and its appearance did not differ from that of wood fiber. When the formaldehyde (HCHO) adsorptivities of CF compared by its pretreatment type, feather meal (FM), which was pretreated CF with high temperature and pressure and then grounded, showed the highest HCHO adsorptivity. In addition, there was no difference between the adsorbed HCHO amounts, which was measured by dinitrophenylhydrazine method, of scissors-chopped CF and CF beated with an electrical blender. Mechanical properties and HCHO emission of medium-density fiberboards (MDF), which were fabricated with wood fiber and 5 wt% CF, beated CF or FM based on the oven-dried weight of wood fiber, were not influenced by the pretreatment type of CF. However, when the values compared with those of MDF made with just wood fiber, thickness swelling and HCHO emission of the MDF were improved greatly with the addition of CF, beated CF or FM. Based on the results, it might be possible to produce MDF with improved dimensional stability and low HCHO emission if CF, beated CF or FM is added partially as a substitute of wood fiber in the manufacturing process of MDF produced with the conventional urea-formaldehyde resin of $E_1$ grade. However, the use of CF or FM in the production of MDF has a low economic feasibility at the current situation due to the securing difficulty and high cost of CF. In order to enhance the economic feasibility, it requires to use CF produced at small to medium-sized chicken meat plants. More importantly, it is considered that the technology developed from this research has a great potential to make provision for the prohibition of animal-based feed and to dispose environmentally avian influenza-infected poultry.

• Journal of Applied Biological Chemistry
• /
• v.57 no.1
• /
• pp.65-72
• /
• 2014

Biochar (BC) from biomass pyrolysis is a carbonaceous material that has been used to remove various contaminants in the environment. The eliminatory action for burcucumber (Sicyos angulatus L.) as an invasive plant is being consistently carried out because of its harmfulness and ecosystem disturbance. In this study, burcucumber biomass was converted into BCs at different pyrolysis temperatures of 300 and $700^{\circ}C$ under a limited oxygen condition. Produced BCs were characterized and investigated to ensure its efficiency on antibiotics' removal in water. The adsorption experiment was performed using two different types of antibiotics, tetracycline (TC) and sulfamethazine (SMZ). For the BC pyrolyzed at a high temperature ($700^{\circ}C$), the values of pH, electrical conductivity, and the contents of ash and carbon increased whereas the yield, mobile matter, molar ratios of H/C and O/C, and functional groups decreased. Results showed that the efficiency of BCs on antibiotics' removal increased as pyrolysis temperature increased from 300 to $700^{\circ}C$ (38 to 99% for TC and 6 to 35% for SMZ). The reaction of ${\pi}-{\pi}$ EDA (electron-donor-acceptor) might be involved in antibiotics' adsorption to BCs. BC has potential to be a superior antibiotics' adsorbent with environmental benefit by recycling of waste/invasive biomass.

• Journal of Life Science
• /
• v.20 no.4
• /
• pp.528-534
• /
• 2010

Garlic (Allium sativum) has been well-known as a folk remedy for a variety of ailments since ancient times, and it is well documented that enhanced garlic consumption leads to a decrease in incidences of cancer. Tight junctions (TJs) are critical structures for the maintenance of cellular polarity, acting as paracellular permeability barriers and playing an essential role in regulating the diffusion of fluid, electrolytes and macromolecules through the paracellular pathway. Matrix metalloproteinases (MMPs) have been implicated as possible mediators of invasiveness and metastasis in some cancers. In this study, we investigated the potential effects of water extract of aged black garlic (ABG) on the correlation between tightening of TJs and anti-invasive activity in human gastric carcinoma AGS cells. The inhibitory effects of ABG on cell motility and invasiveness were found to be associated with increased tightness of TJs, which was demonstrated by an increase in transepithelial electrical resistance. Additionally, the activities of MMP-2 and -9 in AGS cells were inhibited by treatment with ABG, and this was also correlated with a decrease in the expression of their mRNA and proteins. Furthermore, RT-PCR and immunoblotting results indicated that ABG repressed the levels of the claudin proteins, major components of TJs that play a key role in the control and selectivity of paracellular transport. In conclusion, these results suggest that ABG treatment may inhibit tumor metastasis and invasion, and therefore may act as a dietary source to decrease the risk of developing cancer.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.7
• /
• pp.4463-4468
• /
• 2014

To increase the efficiency of a solar module, the development of solar concentrator using a lens or reflection plate is being proceeded actively and the concentrator pursues the a concentration using a lens or an optical device of a concentration rate and designing as a solar tracking system. On the other hand, as the energy density being dissipated as a heat according to the concentration rate increases, the cares should be taken to cool the solar concentrator to prevent the lowering of efficiency of solar cell by the increasing temperature of the solar cell. This study, researched and developed an economical concentrator module system using a low priced reflection optical device. A concentrator was used as a general module to increase the generation efficiency of the solar module and heat generated was emitted by the concentration through the cooling system. To increase the efficiency of the solar concentrator, the cooling system was designed and manufactured. The features of the micro cooling system (MCS) are a natural circulation method by the capillary force, which does not require external power. By using the potential heat in the case of changing the fluid, it is available to realize high performance cooling. The 117W solar modules installed on the reflective plate and the cooling device in the cooling module and the module unit was not compared. The cooling device was installed in the module resulted in a 28% increase in power output.

• Journal of the Korean Electrochemical Society
• /
• v.17 no.1
• /
• pp.30-36
• /
• 2014

Redox complexes to transport electrons from enzyme to electrodes are very important part in glucose sensor. Pentacyanoferrate-bound aniline ($Fe(CN)_5$-aminopyridine), was prepared as a potential redox mediator in a glucose dehydrogenase (GDH)-glucose sensor. The synthesized pyridyl-$NH_2$ to pentacyanoferrate was characterized by the electrochemical and spectroscopic methods. A amperometric enzyme-linked electrode was developed based on GDH, which catalyses the oxidation of glucose. Glucose was detected using GDH that was co-immobilized with an $Fe(CN)_5$-aminopyridine and gold nano-particles (AuNPs) on ITO electrodes. The $Fe(CN)_5$-aminopyridine and AuNPs immobilized onto ITO electrodes provided about a two times higher electrochemical response compared to that of a bare ITO electrode. As glucose was catalyzed by wired GDH, the electrical signal was monitored at 0.4 V versus Ag/AgCl by cyclic voltammetry. The anode currents was linearly increased in proportion to the glucose concentration over the 0~10 mM range.