• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.645-648
• /
• 1995

We propose speed controller of AC servo motors using adaptive two-degrees-of freedom controller design. The overall control system consists of three elements: a forward speed controller, parameter identifier and disturbance observer. This servosystem can improve the characteristics of the closed loop systems with the disturbance observer by eliminating the disturbance torque without changing the command input response. Moreover, the system can be adaptable to the parameter variation by employing adaptive scheme. We will show the control performances through the simulation results.

• Journal of Electrical Engineering and Technology
• /
• v.5 no.2
• /
• pp.276-281
• /
• 2010

The switched reluctance motor (SRM) is an older member of the electric machines family. Its simple structure, ruggedness and inexpensive manufacturing potential make it extremely attractive for industrial applications. However, these merits are overshadowed by its inherent high torque ripple, acoustic noise and difficulty to control. In this paper, a control strategy of the angle position control for the SRM drive based on fuzzy logic is illustrated. The input control parameter, the output control parameter and fuzzy control with FAM table formulation strategy are described and simulated with control patterns, and the decision form of the fuzzy control is illustrated and simulated, and the scope of implementing in a Fuzzy based ASIC chip is enlightened with literature support.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.1
• /
• pp.133-139
• /
• 2013

Convex combination of two adaptive filters is an efficient method to improve adaptive filter performances. In this paper, a subband convex combination method of two adaptive filters for fast convergence rate in the transient state and low steady state error is presented. The cost function of mixing parameter for a subband convex combination is defined, and from this, the coefficient update equation is derived. Steady state analysis is used to prove the stability of the subband convex combination. Some simulation examples in system identification scenario show the validity of the subband convex combination schemes.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.2929-2931
• /
• 1999

In this paper, an adaptive fuzzy inference and HCM(Hard C-Means) clustering method are used for on-line fuzzy modeling of nonlinear and complex system. Here HCM clustering method is utilized for determining the initial parameter of membership function of fuzzy premise rules and also avoiding overflow phenomenon during the identification of consequence parameters. To obtain the on-line model structure of fuzzy systems. we use the recursive least square method for the consequent parameter identification. And the proposed on-line identification algorithm is carried out and is evaluated for sewage treatment process system.

• Proceedings of the KIEE Conference
• /
• 2005.10c
• /
• pp.214-216
• /
• 2005

IPMSM is necessary to use the accurate values of the inductance for the precise torque control, because of using the reluctance torque of the IPM. This paper presents method to uses the hysteresis loop inclination of the flux and current measured by applying the positive and negative voltage pulse alternately on the each-axis. Moreover, presents algorithm for speed sensorless control based on parameter identification and instantaneous reactive power.

• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.219-223
• /
• 1995

This paper deals with the robust control system for parameter variations, fast responses and load torque variations. Frist, fuzzy-sliding adaptive control be used to. Fuzzy-sliding adaptive control is good at fast response. Second, there are many requests for selecting freely the moment of inertia, even though moment of inertia is determined with the materials, structure, shape, and size of the motors. Therefore we developed an inertia-lowering control system that uses torque observer to reduce the moment of inertia. Finally, using torque observer, torque control is done so as to compensate load torque. Consequently, the proposed system verified the superiority through the simulations using MATLAB.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.5
• /
• pp.298-311
• /
• 2003

Iterative Fourier transform algorithm, (IFTA) is tile iterative numerical algorithm for the design of the diffractive optical elements (DOE), by which the phase distribution of a DOE converges on a local optimal solution. The convergence of IFTA depends on several factors 3s initial phase distribution, the structure of the degree of freedom on the observation plane, and the values of internal parameters. In this paper, we analyze tile dependence of the convergence of IFTA on an internal parameter of IFTA, the relaxation parameter, and propose a new hybrid scheme of genetic algorithm and IFTA to obtain more accurate solution.

• Journal of Broadcast Engineering
• /
• v.10 no.3
• /
• pp.383-391
• /
• 2005

In this paper, a new anisotropic diffusion based on Alvarez, Lions, and Morel (ALM) diffusion model is proposed for the suppression of blocking artifact caused by discrete cosine transform (DCT) based image compression. The proposed diffusion model, which incorporates a 'rate control parameter' (RCP), makes it possible to reduce blocking artifacts while to preserve the edge. The RCP controls the rate between isotropic and anisotropic diffusion. Isotropic diffusion is encouraged to eliminate the blocking artifacts in a block boundary of a smooth region, while anisotropic diffusion is encouraged to keep the edge or texture sharp in edge and a block boundary within an edge region. Additionally, to avoid oversmoothness of the texture region, a 'speed control parameter' (SCP), which makes diffusion process slow in the texture region, is employed.

• Structural Engineering and Mechanics
• /
• v.69 no.4
• /
• pp.439-455
• /
• 2019

This research deals with thermo-electro-mechanical buckling analysis of the sandwich nano-beams with face-sheets made of functionally graded carbon nano-tubes reinforcement composite (FG-CNTRC) based on the nonlocal strain gradient elasticity theory (NSGET) considering various higher-order shear deformation beam theories (HSDBT). The sandwich nano-beam with FG-CNTRC face-sheets is subjected to thermal and electrical loads while is resting on Pasternak's foundation. It is assumed that the material properties of the face-sheets change continuously along the thickness direction according to different patterns for CNTs distribution. In order to include coupling of strain and electrical field in equation of motion, the nonlocal non-classical nano-beam model contains piezoelectric effect. The governing equations of motion are derived using Hamilton principle based on HSDBTs and NSGET. The differential quadrature method (DQM) is used to calculate the mechanical buckling loads of sandwich nano-beam as well as critical voltage and temperature rising. After verification with validated reference, comprehensive numerical results are presented to investigate the influence of important parameters such as various HSDBTs, length scale parameter (strain gradient parameter), the nonlocal parameter, the CNTs volume fraction, Pasternak's foundation coefficients, various boundary conditions, the CNTs efficiency parameter and geometric dimensions on the buckling behaviors of FG sandwich nano-beam. The numerical results indicate that, the amounts of the mechanical critical load calculated by PSDBT and TSDBT approximately have same values as well as ESDBT and ASDBT. Also, it is worthy noted that buckling load calculated by aforementioned theories is nearly smaller than buckling load estimated by FSDBT. Also, similar aforementioned structure is used to building the nano/micro oscillators.

• Journal of Power Electronics
• /
• v.10 no.5
• /
• pp.491-497
• /
• 2010

This paper proposes an estimation algorithm for the electrical parameters of synchronous reluctance motors (SynRMs) by using a synchronous PI current regulator at standstill. In reality, the electrical parameters are only measured or estimated in limited conditions without fully considering the effects of the switching devices, connecting wires, and magnetic saturation. As a result, the acquired electrical parameters are different from the real parameters of the motor drive system. In this paper, the effects of switching devices, connecting wires, and the magnetic saturation are considered by simultaneously using the short pulse and closed loop equations of resistance and synchronous inductances. Therefore, the proposed algorithm can be easily and safely implemented with a reduced measuring time. In addition, it does not need any external or additional measurement equipment, information on the motor's dimensions, and material characteristics as in the case of FEM. Several experimental results verify the effectiveness of the proposed algorithm.