• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.1673-1675
• /
• 2004

The design, modeling and measurement of RF switch module for GSM applications is presented in this paper. RF switch module is constructed using a LTCC multi-layer switching circuit and integrated low pass filter. Insertion and return loss of the low pass filter were designed less than 0.3 dB and better than 12.7 dB at 900 MHz. The RF switch module contained 10 embedded passives and 3 surface mount components integrated on $4.6{\times}4.8{\times}1.2$ mm, 6-layer multi-layer integrated circuit. The insertion loss of switch module was measured at 900 MHz was 11 dB.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.488-489
• /
• 2008

Based on the fact that renewable energies such as photovoltaic, wind power, etc. are increasingly used in distribution systems recently which affects overvoltage, this paper implements an unified power flow controller(UPFC) to compensate voltage swell. The implemented scheme employs an ac chopper and a low-pass filter along with a series transformer. The ac chopper converts the amplitude of the voltage down to the nominal value. The low pass filter makes the rough waveform of the output voltage of the ac chopper due to switching smoothly by eliminating harmonics. To verify the effectiveness of the implemented UPFC, the results by Electro-Magnetic Transients Program(EMTP) are presented for various overvoltage cases.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 A
• /
• pp.224-226
• /
• 1993

Multi-layered neural networks offer an exciting alternative for modelling complex non-liner systems. This paper investigates the identification of continuous time nonliner system using neural networks with a single hidden layer. The digital low - pass filter are introduced to avoid direct approximation of system derivatives from sampled data. Using a pre-designed digital low pass filter, an approximated discrete-time estimation model is constructed easily. A continuous approximation liner model is first estimated from sampled input-out signals. Then the modeling error due to the nonlinearity is decreased by a compensator using neural network. Simulation results are given to demonstrate the effective of the proposed method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 B
• /
• pp.800-802
• /
• 1999

본 논문에서는 기존의 알고리즘에서 벗어나 새로이 제안된 유전자 알고리즘을 이용하여 디지털 필터를 설계하는데 목적이 있다. 이 방법은 아날로그 필터에서 디지털 필터로의 전환이 불필요하며, 기존의 디지털 필터 설계방법과는 달리 저역통과(low-pass), 고역통과(high-pass), 대역통과(band-pass), 대역소거(band-stop) 필터와 같은 주파수 선택별 필터를 각각 독립적으로 설계 가능하게 하고, 이에 따른 계산 손실을 줄일 수 있다. 유전자 알고리즘을 사용하는데 있어 적합도 함수는 주파수 응답 크기를 이용한다. 실제로 주파수 응답특성과 디지털 필터의 계수와는 밀접한 관계가 있으므로, 원하는 필터의 주파수응답특성을 통해, 디지털 필터의 계수를 최적화 한다. 또한 필터계수 최적화 과정에 있어, 선택, 교배, 돌연변이와 같은 유전 연산자 적용시 필터의 계수들은 각각 안정도가 보장되어지는 범위내에서 선택되게 한다. 디지털 필터를 설계한 후 기존의 방법과 새로이 제안된 방법의 성능을 비교 평가 한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 학술대회 논문집 정보 및 제어부문
• /
• pp.197-198
• /
• 2008

본 논문은 Impedance plethysmography를 이용하여 당뇨병 및 동맥경화의 비침습적이고 고통없는 조기 진단을 위한 시스템 구성의 초기 단계로, 하지 동맥의 기계적 특징인 혈량 변화를 비침습적으로 측정하였다. 혈량과 혈압의 변화는 각각 Impedance plethysmograph와 mercury spbygmomanometer를 이용하여 측정되는데 탄성도는 혈량 변화값을 맥압(수축기압)의 변화량으로 나누어 계산한다. 이 논문에서는 하지 동맥의 탄성도를 비침습적으로 측정하기 위한 전초 단계로서 하지 동맥에서의 임피던스 변화만을 측정하였다. 회로는 50kHz Wien bridge 발진 회로, demodulation, 50kHz band past filter, 0.1Hz high pass filter, 20Hz low pass filter와 증폭기로 구성하였고, 생체 신호 획득 및 처리 과정을 거쳐 임피던스 변화량을 관찰하였다.

• 전기학회논문지
• /
• 제62권7호
• /
• pp.1014-1019
• /
• 2013

Signal processing techniques based on fractional order calculus have been successfully applied in analyzing heavy-tailed non-Gaussian signals. It was found that the surface EMG signals from the muscles having nuero-muscular disease are best modeled by using the heavy-tailed non-gaussian random processes. In this regard, this paper describes an application of digital fractional order lowpass differentiators(FOLPD, weighted FOLPD) based on the fractional order calculus in detecting peaks of surface EMG signal. The performances of the FOLPD and WFOLPD are analyzed based on different filter length and varying MUAP wave shape from recorded and simulated surface EMG signals. As a results, the WFOLPD showed better SNR improving factors than the existing WLPD and to be more robust under the various surface EMG signals.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.532-535
• /
• 2000

We have fabricated a sensor system for on-line monitoring the oxygen permeability and diffusivity of six different polymer films using the miniaturized 6 cathode(Ag)-single anode(Ag/AgCl) type hexagonal oxygen electrode. This system consists of multiple input front-end electronics, signal conditioning circuit using the embedded microcontroller 80C196KC, PC interface circuit and PC with the OS for microcontroller and the operating program for this system. The digital low-[ass filter was programmed and the simulated filter characteristics were enough to eliminate the noise from sensor signal. According to the experimental results, the linearity coefficients of the output voltage to oxygen partial pressure for each sensor electrode of six cathode type oxygen sensor are 0.998, 0.997, 0.998, 0.997, 0.997, 0.997 respectively, and the response times are all within 4 minutes.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2015년도 전력전자학술대회 논문집
• /
• pp.367-368
• /
• 2015

This paper introduces a shunt active power filter with a small DC bus capacitor by adding additional low-pass filter (LPF). The DC link voltage fluctuation is impressively suppressed with a small value in spite of the low value of DC-link capacitor under the steady-state condition. Consequently, the cost and volume of power converter are significantly reduced thanks to the reduced value of DC-bus capacitor. On the other hand, an indirect control strategy is used to maintain grid-side current when non-linear loads are connected to the system. By using proportional-integral (PI) and modified repetitive controller (RC) in dq0 frame, the calculation time is greatly decreased by 6 times compared with the conventional RC, and the number of measurement devices is also minimized. As a result, the acquired total harmonic distortion (THD) is lower than 2% regardless of the load conditions. Simulation results are carried out in order to verify the effectiveness of the proposed control strategy.

• 전기전자학회논문지
• /
• 제26권2호
• /
• pp.265-270
• /
• 2022

본 논문에서는 정지 좌표계 dq-축 전류를 기반으로 하는 비대칭 6상 PMSM의 스위치 개방 고장 검출 알고리즘을 제안한다. 본 논문에서의 해당 모터는 2개의 3상 권선이 30°의 전기적 위상차를 갖고 중성점이 분리된 비대칭 구조를 갖는다. 따라서 듀얼 3상 PWM 인버터와 스위치 개방 고장으로 인한 검출기법이 반드시 필요하다. 본 논문에서는 비대칭 6상 PMSM을 구동하기 위해 듀얼 dq축 전류 제어 방식을 사용하며 전역 통과 필터와 저역 통과 필터를 사용해 전류 변동을 감지하여 개방 고장이 발생한 스위치를 검출하는 방식을 제안한다. 제안한 방법의 효과와 유용성은 여러 실험을 통해 검증하였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제7권3호
• /
• pp.166-176
• /
• 2007

Radio frequency (RF) microelectromechanical systems (MEMS) have been pursued for more than a decade as a solution of high-performance on-chip fixed, tunable and reconfigurable circuits. This paper reviews our research work on RF MEMS switches and switching circuits in the past five years. The research work first concentrates on the development of lateral DC-contact switches and capacitive shunt switches. Low insertion loss, high isolation and wide frequency band have been achieved for the two types of switches; then the switches have been integrated with transmission lines to achieve different switching circuits, such as single-pole-multi-throw (SPMT) switching circuits, tunable band-pass filter, tunable band-stop filter and reconfigurable filter circuits. Substrate transfer process and surface planarization process are used to fabricate the above mentioned devices and circuits. The advantages of these two fabrication processes provide great flexibility in developing different types of RF MEMS switches and circuits. The ultimate target is to produce more powerful and sophisticated wireless appliances operating in handsets, base stations, and satellites with low power consumption and cost.