• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1345-1347
• /
• 2000

This paper presents a new method to reducing inrush current and energy saving of capacitor starting single-phase induction motor used in air-conditioner. It can be obtained that proposed system is low cost and small size as compared with other controller. Experiments are focused on a capacitor starting single-phase induction motor. The optimal power saving and in-rush current limiting by phase angle control are verified by experimental results. Also, auxiliary winding was controlled by electronic starting switch.

• Computers and Concrete
• /
• v.23 no.6
• /
• pp.399-408
• /
• 2019

Structural health monitoring is important for the safety of lives and asset management. In this study, numerical models were developed for the piezoresistive behavior of smart concrete based on finite element (FE) method. Finite element models were calibrated with experimental data collected from compression test. The compression test was performed on smart concrete cube specimens with 75 mm dimensions. Smart concrete was made of cement CEM II 42.5 R, silica fume, fine and coarse crushed limestone aggregates, brass fibers and plasticizer. During the compression test, electrical resistance change and compressive strain measurements were conducted simultaneously. Smart concrete had a strong linear relationship between strain and electrical resistance change due to its piezoresistive function. The piezoresistivity of the smart concrete was modeled by FE method. Twenty-noded solid brick elements were used to model the smart concrete specimens in the finite element platform of Ansys. The numerical results were determined for strain induced resistivity change. The electrical resistivity of simulated smart concrete decreased with applied strain, as found in experimental investigation. The numerical findings are in good agreement with the experimental results.

• Proceedings of the KIEE Conference
• /
• 2008.04c
• /
• pp.158-160
• /
• 2008

Safety critical systems are those in which a failure can have serious and irreversible consequences. Nowadays digital technology has been rapidly applied to critical system such as railways, airplanes, nuclear power plants, and vehicles. The main difference between analog system and digital system is that the software is the key component of the digital system. The digital system performs more varying and highly complex functions efficiently compared to the existing analog system because software can be flexibly designed and implemented. The flexible design make it difficult to predict the software failures. This paper reviews safety standard and criteria for safety critical system such as railway system and suggests development methodology, ordering management and assessment process for railway software with more detail description.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1014-1015
• /
• 2008

Safety critical systems are those in which a failure can have serious and irreversible consequences. Nowadays digital technology has been rapidly applied to critical system such as railways, airplanes, nuclear power plants, and vehicles. The main difference between analog system and digital system is that the software is the key component of the digital system. The digital system performs more varying and highly complex functions efficiently compared to the existing analog system because software can be flexibly designed and implemented. The flexible design make it difficult to predict the software failures. This paper reviews safety standard and criteria for safety critical system such as railway system and suggests development process, ordering management and assessment process for railway software with more detail description.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.1288-1290
• /
• 2003

The maintenance CALS system for car of urban transit is a part of standardization and development of urban transit system, and We have been performed the establishment of maintenance CALS system from 2001 to 2005. The RAMS for management computerization system are utilized in a variety of CALS system for user's convenience and safety in maintenance. Ever since its inception though, the urban transit has searched for ways to improve reliability, availability, maintainability and safety of the railway subsystem. In this paper, This system include RAMS(reliability, availability, maintainability and safety) and expert system of the vehicles shall be enhanced in the future.

• Korean Journal of Occupational Health Nursing
• /
• v.17 no.2
• /
• pp.239-249
• /
• 2008

Purpose: This study intended to investigate how health and safety organization, management, activities and safety culture of healthcare industries are different from other industries (food, lodging, gas, and electricity industries). Method: Data were analyzed using '2005 The National Survey for Occupational Safety and Health Tendency'. Results: For health and safety training, both new training and regular training time of healthcare sector was lower than comparison sectors. For health and safety manager assigning form, there were many case in healthcare sector to assign a safety manager as a deputy and a health manager as an additional job, there were some differences from comparison sectors. It was found that establishment of countermeasures by cause investigation and analysis execution for occupational accidents in the healthcare sector was lower than comparison sectors. For health and safety activities and safety culture awareness, they were estimated in healthcare sector to be lower than comparison sectors. Conclusion: Healthcare sector had relatively lower health and safety activities and safety culture awareness compared with comparison sectors. So, it is required business owner's concerns and efforts to assign exclusively responsible health and safety manager and to activate health and safety training and occupational accident prevention.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.3
• /
• pp.163-171
• /
• 2015

The aim of this study was to investigate kinematic mechanism of gait different road conditions(dry vs. oil) in order women. For this study, twenty older women and ten young women participated in this research. twelve infrared cameras were used to collect data. It appeared that the gait strategies of older women were slower velocity and higher CoM than young women. Depending on road conditions, gait velocities of dominant muscle older women on dry surface were faster than dominant sense older women, but those of them were inverse on oil surface. The slip displacement of dominant muscle older women was less than young women, but the slip displacement of dominant sense older women was greater than young women. In case of blind during stance phase on oil surface, the rotational motion of the ankle and knee joints were increased. In conclusion, older women were subjected to self-organization theory and phase shift in dynamic theory.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2741-2743
• /
• 2005

In this paper, Elevator is designed for real time security & management. Security & Management System is designed for wireless communication between an Elevator and an manager, between Elevation and an manager. Also, to have remote control capability, embedded system platform with TCP/IP techniques are applied to process control system with independent open structure for the precise data transmission and without constraint of operating system. Security and Management system is designed to solve problem of network port by Bluetooth module. Moved recording, unworked table, life of device and replacement time of device are made database, database is applied to Fuzzy Rule for pre-detection unworked Elevator. Security & Management system is designed safety and convenience for customers using Elevator as well as rapidly treatment with unworked Elevator.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1173-1174
• /
• 2007

The project of advanced urban transit system development is developing the advanced vehicle and the core technologies for the cost down by system change, the transport safety and the environmental friendliness and the improvement of passenger service. The product data management system is installed for management of each project. Various data and informations producted from each project are made for database. Therefore, we develop the product data management system.

• Nuclear Engineering and Technology
• /
• v.38 no.3
• /
• pp.259-276
• /
• 2006

As the use of digital systems becomes more prevalent, adequate techniques for software specification and analysis have become increasingly important in nuclear power plant (NPP) safety-critical systems. Additionally, the importance of software verification and validation (V&V) based on adequate specification has received greater emphasis in view of improving software quality. For thorough V&V of safety-critical systems, V&V should be performed throughout the software lifecycle. However, systematic V&V is difficult as it involves many manual-oriented tasks. Tool support is needed in order to more conveniently perform software V&V. In response, we developed four kinds of computer aided software engineering (CASE) tools to support system specification for a formal-based analysis according to the software lifecycle. In this work, we achieved optimized integration of each tool. The toolset, NuSEE, is an integrated environment for software specification and V&V for PLC based safety-critical systems. In accordance with the software lifecycle, NuSEE consists of NuSISRT for the concept phase, NuSRS for the requirements phase, NuSDS for the design phase and NuSCM for configuration management. It is believed that after further development our integrated environment will be a unique and promising software specification and analysis toolset that will support the entire software lifecycle for the development of PLC based NPP safety-critical systems.